ugfx/boards/base/Mikromedia-Plus-STM32-M4/gmouse_lld_STMPE610_board.h

120 lines
3.0 KiB
C
Raw Normal View History

/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.org/license.html
*/
#ifndef _GINPUT_LLD_MOUSE_BOARD_H
#define _GINPUT_LLD_MOUSE_BOARD_H
// Resolution and Accuracy Settings
#define GMOUSE_STMPE610_PEN_CALIBRATE_ERROR 8
#define GMOUSE_STMPE610_PEN_CLICK_ERROR 6
#define GMOUSE_STMPE610_PEN_MOVE_ERROR 4
#define GMOUSE_STMPE610_FINGER_CALIBRATE_ERROR 14
#define GMOUSE_STMPE610_FINGER_CLICK_ERROR 18
#define GMOUSE_STMPE610_FINGER_MOVE_ERROR 14
// How much extra data to allocate at the end of the GMouse structure for the board's use
#define GMOUSE_STMPE610_BOARD_DATA_SIZE 0
// Options - Leave these commented to make it user configurable in the gfxconf.h
//#define GMOUSE_STMPE610_READ_PRESSURE FALSE
//#define GMOUSE_STMPE610_SELF_CALIBRATE FALSE
//#define GMOUSE_STMPE610_TEST_MODE FALSE
// If TRUE this board has the STMPE610 IRQ pin connected to a GPIO.
// Note: Although this board has such a pin its reliability has not been tested on this board!!!!!
#define GMOUSE_STMPE610_GPIO_IRQPIN FALSE
// If TRUE this is a really slow CPU and we should always clear the FIFO between reads.
#define GMOUSE_STMPE610_SLOW_CPU FALSE
// Slave address
#define STMPE610_ADDR (0x88 >> 1)
// Maximum timeout
#define STMPE610_TIMEOUT 0x3000
static const I2CConfig i2ccfg = {
OPMODE_I2C,
390625, // Conservative please
FAST_DUTY_CYCLE_2,
};
static bool_t init_board(GMouse* m, unsigned driverinstance) {
(void) m;
// This board only supports one touch panel
if (driverinstance)
return FALSE;
palSetPadMode(GPIOA, 0, PAL_MODE_INPUT | PAL_STM32_PUDR_FLOATING); /* TP IRQ */
palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN); /* SCL */
palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN); /* SDA */
i2cStart(&I2CD1, &i2ccfg);
return TRUE;
}
#if GMOUSE_STMPE610_GPIO_IRQPIN
static bool_t getpin_irq(GMouse* m) {
(void) m;
return !palReadPad(GPIOA, 0);
}
#endif
static inline void aquire_bus(GMouse* m) {
(void) m;
}
static inline void release_bus(GMouse* m) {
(void) m;
}
static void write_reg(GMouse* m, uint8_t reg, uint8_t val) {
uint8_t txbuf[2];
(void) m;
txbuf[0] = reg;
txbuf[1] = val;
i2cAcquireBus(&I2CD1);
i2cMasterTransmitTimeout(&I2CD1, STMPE610_ADDR, txbuf, 2, 0, 0, MS2ST(STMPE610_TIMEOUT));
i2cReleaseBus(&I2CD1);
}
static uint8_t read_byte(GMouse* m, uint8_t reg) {
uint8_t rxbuf[1];
(void) m;
rxbuf[0] = 0;
i2cAcquireBus(&I2CD1);
i2cMasterTransmitTimeout(&I2CD1, STMPE610_ADDR, &reg, 1, rxbuf, 1, MS2ST(STMPE610_TIMEOUT));
i2cReleaseBus(&I2CD1);
return rxbuf[0];
}
static uint16_t read_word(GMouse* m, uint8_t reg) {
uint8_t rxbuf[2];
(void) m;
rxbuf[0] = 0;
rxbuf[1] = 0;
i2cAcquireBus(&I2CD1);
i2cMasterTransmitTimeout(&I2CD1, STMPE610_ADDR, &reg, 1, rxbuf, 2, MS2ST(STMPE610_TIMEOUT));
i2cReleaseBus(&I2CD1);
return (((uint16_t)rxbuf[0]) << 8) | rxbuf[1];
}
#endif /* _GINPUT_LLD_MOUSE_BOARD_H */