18 lines
1.2 KiB
Plaintext
18 lines
1.2 KiB
Plaintext
|
This is a working Arduino project for the TinyScreen ATmega board.
|
||
|
|
|
||
|
|
To use this with the Arduino IDE Development Environment follow these steps...
|
||
|
|
|
||
|
|
1/ Copy the gfx directory from this directory to your Arduino library. eg <Documents>/Arduino/libraries/gfx
|
||
|
|
3/ Create a subdirectory under "gfx" called "ugfx" and copy the entire ugfx system to that directory.
|
||
|
|
4/ In the "gfx" directory adjust the gfxconf.h for your project.
|
||
|
|
5/ In the gfx directory create a .c file for each driver that you want to use that contains a single line
|
||
|
|
to #include the driver source in the repository file. For a GDISP driver you will also need to create
|
||
|
|
a gdisp_lld_config.h file that contains a single line that #include's the gdisp_lld_config.h file for
|
||
|
|
the GDISP driver. Don't forget to add the board files for your drivers.
|
||
|
|
This example has the files for the SSD1331 TinyScreen display.
|
||
|
|
6/ Copy the example ugfx_test.ino file to your Arduino projects directory eg <Documents>/Arduino/ugfx_test
|
||
|
|
7/ Modify the ugfx_test.ino project to suit.
|
||
|
|
8/ Remember that for ATmega platforms RAM and FLASH are very limited. Be careful which ugfx options you turn on.
|
||
|
|
Arduino ARM based boards are much less limited.
|
||
|
|
|