ugfx/drivers/ginput/touch/MCU/ginput_lld_mouse_board_example.h

99 lines
2.6 KiB
C
Raw Normal View History

/*
2012-11-26 22:38:11 +00:00
ChibiOS/GFX - Copyright (C) 2012
Joel Bodenmann aka Tectu <joel@unormal.org>
This file is part of ChibiOS/GFX.
ChibiOS/GFX is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/GFX is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* @file drivers/ginput/touch/MCU/ginput_lld_mouse_board_example.h
* @brief GINPUT Touch low level driver source for the MCU on the example board.
*
2012-12-18 21:04:35 +00:00
* @defgroup Mouse
* @ingroup GINPUT
*
* @{
*/
#ifndef _GINPUT_LLD_MOUSE_BOARD_H
#define _GINPUT_LLD_MOUSE_BOARD_H
/**
* @brief Initialise the board for the touch.
*
* @notapi
*/
static __inline void init_board(void) {
/* Code here */
#error "ginputMCU: You must supply a definition for init_board for your board"
}
/**
* @brief Check whether the surface is currently touched
* @return TRUE if the surface is currently touched
*
* @notapi
*/
static __inline bool_t getpin_pressed(void) {
/* Code here */
#error "ginputMCU: You must supply a definition for getpin_pressed for your board"
}
/**
* @brief Aquire the bus ready for readings
*
* @notapi
*/
static __inline void aquire_bus(void) {
/* Code here */
#error "ginputMCU: You must supply a definition for aquire_bus for your board"
}
/**
* @brief Release the bus after readings
*
* @notapi
*/
static __inline void release_bus(void) {
/* Code here */
#error "ginputMCU: You must supply a definition for release_bus for your board"
}
/**
* @brief Read an x value from touch controller
* @return The value read from the controller
*
* @notapi
*/
static __inline uint16_t read_x_value(void) {
/* Code here */
#error "ginputMCU: You must supply a definition for read_x_value for your board"
}
/**
* @brief Read an y value from touch controller
* @return The value read from the controller
*
* @notapi
*/
static __inline uint16_t read_y_value(void) {
/* Code here */
#error "ginputMCU: You must supply a definition for read_y_value for your board"
}
#endif /* _GINPUT_LLD_MOUSE_BOARD_H */
/** @} */