Added complete support for Altera Terasic MAX10 NEEK board

boards/base/Altera-MAX10-Neek/board.mk

@@ -3,4 +3,5 @@ GFXSRC  +=
 GFXDEFS +=
 GFXLIBS +=
 
-include $(GFXLIB)/drivers/gdisp/framebuffer/driver.mk
+include $(GFXLIB)/drivers/gdisp/alteraframereader/driver.mk
+include $(GFXLIB)/drivers/ginput/touch/FT5316/driver.mk

boards/base/Altera-MAX10-Neek/board_alteraframereader.h

@@ -0,0 +1,30 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+#define SCREEN_WIDTH            800
+#define SCREEN_HEIGHT           480
+#define FRAMEREADER_BASE        ALT_VIP_VFR_0_BASE
+
+#if GDISP_NEED_CONTROL
+	static void board_backlight(GDisplay* g, uint8_t percent)
+	{
+		(void) g;
+		(void) percent;
+	}
+
+	static void board_contrast(GDisplay* g, uint8_t percent)
+	{
+		(void) g;
+		(void) percent;
+	}
+
+	static void board_power(GDisplay* g, powermode_t pwr)
+	{
+		(void) g;
+		(void) pwr;
+	}
+#endif

boards/base/Altera-MAX10-Neek/board_framebuffer.h

@@ -1,62 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-#include <system.h>
-#include <io.h>
-
-#define SCREEN_WIDTH			800
-#define SCREEN_HEIGHT			480
-#define GDISP_LLD_PIXELFORMAT	GDISP_PIXELFORMAT_RGB888
-
-#ifdef GDISP_DRIVER_VMT
-
-	static void board_init(GDisplay* g, fbInfo* fbi)
-	{
-		g->g.Width = SCREEN_WIDTH;
-		g->g.Height = SCREEN_HEIGHT;
-		g->g.Backlight = 100;
-		g->g.Contrast = 50;
-		fbi->linelen = g->g.Width * sizeof(LLDCOLOR_TYPE);									// bytes per row
-		fbi->pixels = gfxAlloc(SCREEN_WIDTH * SCREEN_HEIGHT * sizeof(LLDCOLOR_TYPE));		// pointer to the memory frame buffer
-		if (!fbi->pixels) {
-			gfxHalt("Couldn't allocate memory for framebuffer\r\n");
-		}
-
-		// Let the framebuffer reader know where to find the framebuffer
-		IOWR(FRAMEBUFFER_READER_BASE, 0, (alt_u32*)fbi->pixels);
-
-		// Make sure the MSB is set so we bypass the data cache
-		fbi->pixels = (void*)((char*)fbi->pixels + 0x80000000);
-	}
-
-	#if GDISP_HARDWARE_FLUSH
-		static void board_flush(GDisplay* g)
-		{
-			(void) g;
-		}
-	#endif
-
-	#if GDISP_NEED_CONTROL
-		static void board_backlight(GDisplay* g, uint8_t percent)
-		{
-			(void) g;
-			(void) percent;
-		}
-
-		static void board_contrast(GDisplay* g, uint8_t percent)
-		{
-			(void) g;
-			(void) percent;
-		}
-
-		static void board_power(GDisplay* g, powermode_t pwr)
-		{
-			(void) g;
-			(void) pwr;
-		}
-	#endif
-
-#endif /* GDISP_LLD_BOARD_IMPLEMENTATION */

boards/base/Altera-MAX10-Neek/gmouse_lld_FT5316_board.h

@@ -0,0 +1,106 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+#ifndef _GINPUT_LLD_MOUSE_BOARD_H
+#define _GINPUT_LLD_MOUSE_BOARD_H
+
+#include <stdio.h>
+#include <system.h>
+#include "i2c_opencores.h"
+
+#define FT5316_I2C_SLAVE_ADDRESS 0x38
+
+// Resolution and Accuracy Settings
+#define GMOUSE_FT5316_PEN_CALIBRATE_ERROR		8
+#define GMOUSE_FT5316_PEN_CLICK_ERROR			6
+#define GMOUSE_FT5316_PEN_MOVE_ERROR			4
+#define GMOUSE_FT5316_FINGER_CALIBRATE_ERROR	14
+#define GMOUSE_FT5316_FINGER_CLICK_ERROR		18
+#define GMOUSE_FT5316_FINGER_MOVE_ERROR			14
+
+// How much extra data to allocate at the end of the GMouse structure for the board's use
+#define GMOUSE_FT5316_BOARD_DATA_SIZE			0
+
+// Set this to TRUE if you want self-calibration.
+//	NOTE:	This is not as accurate as real calibration.
+//			It requires the orientation of the touch panel to match the display.
+//			It requires the active area of the touch panel to exactly match the display size.
+#define GMOUSE_FT5316_SELF_CALIBRATE			TRUE
+
+static unsigned int device_write(unsigned char device_address, unsigned char sub_address, unsigned char wdata)
+{
+	I2C_start(I2C_OPENCORES_0_BASE, device_address, 0);			// Device address in write mode
+	I2C_write(I2C_OPENCORES_0_BASE, sub_address, 0);			// Set sub address to read register
+	I2C_write(I2C_OPENCORES_0_BASE, wdata, 1);					// Set write register
+
+	return 1;
+}
+
+static unsigned int device_read(unsigned char device_address, unsigned char sub_address)
+{
+	unsigned int rdata;
+
+	I2C_start(I2C_OPENCORES_0_BASE, device_address, 0);			// Device address in write mode
+	rdata = I2C_write(I2C_OPENCORES_0_BASE, sub_address, 0);	// Set sub address to read register.
+	I2C_start(I2C_OPENCORES_0_BASE, device_address, 1);			// Send start again but this time in read mode
+	rdata = I2C_read(I2C_OPENCORES_0_BASE, 1);					// Read the register and send stop
+
+	return rdata;
+}
+
+static unsigned int device_read_16(unsigned char device_address, unsigned char sub_address)
+{
+	unsigned int rdata_l;
+	unsigned int rdata_h;
+
+	I2C_start(I2C_OPENCORES_0_BASE, device_address, 0);			// Eccelerometer address in write mode
+	rdata_l = I2C_write(I2C_OPENCORES_0_BASE, sub_address, 0);	// Set sub address to read register.
+	I2C_start(I2C_OPENCORES_0_BASE, device_address, 1);			// Send start again but this time in read mode
+	rdata_l = I2C_read(I2C_OPENCORES_0_BASE, 0);				// Read the register and MACK
+	rdata_h = I2C_read(I2C_OPENCORES_0_BASE, 1);				// Read the next register and send stop
+
+	return (0xFFFF & ((rdata_h << 8) | rdata_l));
+}
+
+static bool_t init_board(GMouse* m, unsigned instance)
+{
+	(void)m;
+	(void)instance;
+
+	I2C_init(I2C_OPENCORES_0_BASE, 50000000, 400000);
+
+	return TRUE;
+}
+
+static void write_reg(GMouse* m, uint8_t reg, uint8_t val)
+{
+	(void)m;
+
+	device_write(FT5316_I2C_SLAVE_ADDRESS, reg, val);
+}
+
+static uint8_t read_byte(GMouse* m, uint8_t reg)
+{
+	(void)m;
+	uint8_t ret = 0;
+
+	ret = (uint8_t)device_read(FT5316_I2C_SLAVE_ADDRESS, reg);
+
+	return ret;
+}
+
+static uint16_t read_word(GMouse* m, uint8_t reg)
+{
+	(void)m;
+	uint16_t ret = 0;
+
+	ret = (uint16_t)device_read(FT5316_I2C_SLAVE_ADDRESS, reg);
+
+	return ret;
+}
+
+#endif /* _GINPUT_LLD_MOUSE_BOARD_H */

boards/base/Altera-MAX10-Neek/readme.txt

@@ -6,4 +6,5 @@ In order to use this board file, the following things are needed:
 		data cache if the MSB is set.
 
 On this board uGFX currently supports:
-	- GDISP via the framebuffer driver
+	- GDISP via the altraframereader driver
+	- GINPUT via the FT5316 mouse/touchscreen driver

changelog.txt

@@ -18,6 +18,7 @@ FIX:		Fixed extra dots when drawing anti-aliased fonts with wordwrap
 FEATURE:	Increase non-UTF8 font support to 0 to 255 rather than just the true ascii set
 FEATURE:	Added Fb24bpp driver for RGB888 and BGR888 packed framebuffer displays
 FEATURE:	Added UC8173 driver
+FEATURE:	Added complete support for Altera Terasic MAX10 NEEK board
 
 
 *** Release 2.7 ***