F4 FSMC support, add support for different orientations, tidyup
trsaunders
parent
6295717262
commit
2a2f5b2db7
|
|
@ -1,12 +1,25 @@
|
|||
#include "ch.h"
|
||||
#include "hal.h"
|
||||
|
||||
#include "s6d1121_lld.h"
|
||||
#include "chprintf.h"
|
||||
|
||||
#ifdef LCD_USE_S6D1121
|
||||
|
||||
static uint16_t buf[((SCREEN_HEIGHT > SCREEN_WIDTH ) ? SCREEN_HEIGHT : SCREEN_WIDTH)];
|
||||
static uint8_t orientation;
|
||||
extern uint16_t lcd_width, lcd_height;
|
||||
|
||||
/* all interfaces use RST via GPIO */
|
||||
/* TODO: option to disable RST; assumes RST is tied high */
|
||||
#define LCD_RST_LOW palClearPad(LCD_RST_GPIO, LCD_RST_PIN)
|
||||
#define LCD_RST_HIGH palSetPad(LCD_RST_GPIO, LCD_RST_PIN)
|
||||
|
||||
#define s6d1121_delay(n) halPolledDelay(MS2RTT(n));
|
||||
|
||||
static uint16_t buf[((SCREEN_HEIGHT > SCREEN_WIDTH ) ? SCREEN_HEIGHT : SCREEN_WIDTH)];
|
||||
|
||||
#if defined(LCD_USE_GPIO)
|
||||
|
||||
#define LCD_CS_LOW palClearPad(LCD_CS_GPIO, LCD_CS_PIN)
|
||||
#define LCD_CS_HIGH palSetPad(LCD_CS_GPIO, LCD_CS_PIN)
|
||||
|
||||
|
|
@ -22,8 +35,6 @@ static uint16_t buf[((SCREEN_HEIGHT > SCREEN_WIDTH ) ? SCREEN_HEIGHT : SCREEN_WI
|
|||
#define LCD_BL_LOW palClearPad(LCD_BL_GPIO, LCD_BL_PIN)
|
||||
#define LCD_BL_HIGH palSetPad(LCD_BL_GPIO, LCD_BL_PIN)
|
||||
|
||||
static uint8_t orientation;
|
||||
extern uint16_t lcd_width, lcd_height;
|
||||
|
||||
static inline void lld_lcddelay(void)
|
||||
{
|
||||
|
|
@ -56,9 +67,6 @@ static __inline uint16_t lld_lcdReadData(void) {
|
|||
|
||||
#endif
|
||||
|
||||
// value = palReadPort(LCD_DATA_PORT); // dummy
|
||||
// value = palReadPort(LCD_DATA_PORT);
|
||||
|
||||
#ifndef STM32F4XX
|
||||
// change pin mode back to digital output
|
||||
LCD_DATA_PORT->CRH = 0x33333333;
|
||||
|
|
@ -96,7 +104,7 @@ void lld_lcdWriteData(uint16_t lcdData) {
|
|||
lld_lcdwrite(lcdData);
|
||||
}
|
||||
|
||||
void lcdWriteReg(uint16_t lcdReg, uint16_t lcdRegValue) {
|
||||
void lld_lcdWriteReg(uint16_t lcdReg, uint16_t lcdRegValue) {
|
||||
LCD_CS_LOW;
|
||||
|
||||
lld_lcdWriteIndex(lcdReg);
|
||||
|
|
@ -105,131 +113,13 @@ void lcdWriteReg(uint16_t lcdReg, uint16_t lcdRegValue) {
|
|||
LCD_CS_HIGH;
|
||||
}
|
||||
|
||||
void lld_lcdInit(void) {
|
||||
// ChibiOS HAL has a nice and precise delay function,
|
||||
// halPolledDelay(US2RTT(x)); or halPolledDelay(MS2RTT(x));
|
||||
// Why Not use it?
|
||||
// IO Default Configurations
|
||||
palSetPadMode(LCD_CS_GPIO, LCD_CS_PIN, PAL_MODE_OUTPUT_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
|
||||
palSetPadMode(LCD_WR_GPIO, LCD_WR_PIN, PAL_MODE_OUTPUT_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
|
||||
palSetPadMode(LCD_RD_GPIO, LCD_RD_PIN, PAL_MODE_OUTPUT_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
|
||||
palSetPadMode(LCD_RST_GPIO, LCD_RST_PIN, PAL_MODE_OUTPUT_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
|
||||
palSetPadMode(LCD_RS_GPIO, LCD_RS_PIN, PAL_MODE_OUTPUT_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
|
||||
palSetPadMode(LCD_BL_GPIO, LCD_BL_PIN, PAL_MODE_OUTPUT_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
|
||||
|
||||
palSetGroupMode(LCD_D0_GPIO, 0x0000000F, 0, PAL_MODE_OUTPUT_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
|
||||
palSetGroupMode(LCD_D4_GPIO, 0x0000FFF0, 0, PAL_MODE_OUTPUT_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
|
||||
|
||||
LCD_CS_HIGH;
|
||||
LCD_RST_HIGH;
|
||||
LCD_RD_HIGH;
|
||||
LCD_WR_HIGH;
|
||||
LCD_BL_LOW;
|
||||
|
||||
// A Good idea to reset the module before using
|
||||
LCD_RST_LOW;
|
||||
halPolledDelay(MS2RTT(2));
|
||||
LCD_RST_HIGH; // Hardware Reset
|
||||
halPolledDelay(MS2RTT(2));
|
||||
|
||||
lcdWriteReg(0x11,0x2004);
|
||||
lcdWriteReg(0x13,0xCC00);
|
||||
lcdWriteReg(0x15,0x2600);
|
||||
lcdWriteReg(0x14,0x252A);
|
||||
lcdWriteReg(0x12,0x0033);
|
||||
lcdWriteReg(0x13,0xCC04);
|
||||
|
||||
halPolledDelay(MS2RTT(1));
|
||||
|
||||
lcdWriteReg(0x13,0xCC06);
|
||||
|
||||
halPolledDelay(MS2RTT(1));
|
||||
|
||||
lcdWriteReg(0x13,0xCC4F);
|
||||
|
||||
halPolledDelay(MS2RTT(1));
|
||||
|
||||
lcdWriteReg(0x13,0x674F);
|
||||
lcdWriteReg(0x11,0x2003);
|
||||
|
||||
halPolledDelay(MS2RTT(1));
|
||||
|
||||
// Gamma Setting
|
||||
lcdWriteReg(0x30,0x2609);
|
||||
lcdWriteReg(0x31,0x242C);
|
||||
lcdWriteReg(0x32,0x1F23);
|
||||
lcdWriteReg(0x33,0x2425);
|
||||
lcdWriteReg(0x34,0x2226);
|
||||
lcdWriteReg(0x35,0x2523);
|
||||
lcdWriteReg(0x36,0x1C1A);
|
||||
lcdWriteReg(0x37,0x131D);
|
||||
lcdWriteReg(0x38,0x0B11);
|
||||
lcdWriteReg(0x39,0x1210);
|
||||
lcdWriteReg(0x3A,0x1315);
|
||||
lcdWriteReg(0x3B,0x3619);
|
||||
lcdWriteReg(0x3C,0x0D00);
|
||||
lcdWriteReg(0x3D,0x000D);
|
||||
|
||||
lcdWriteReg(0x16,0x0007);
|
||||
lcdWriteReg(0x02,0x0013);
|
||||
lcdWriteReg(0x03,0x0003);
|
||||
lcdWriteReg(0x01,0x0127);
|
||||
|
||||
halPolledDelay(MS2RTT(1));
|
||||
|
||||
lcdWriteReg(0x08,0x0303);
|
||||
lcdWriteReg(0x0A,0x000B);
|
||||
lcdWriteReg(0x0B,0x0003);
|
||||
lcdWriteReg(0x0C,0x0000);
|
||||
lcdWriteReg(0x41,0x0000);
|
||||
lcdWriteReg(0x50,0x0000);
|
||||
lcdWriteReg(0x60,0x0005);
|
||||
lcdWriteReg(0x70,0x000B);
|
||||
lcdWriteReg(0x71,0x0000);
|
||||
lcdWriteReg(0x78,0x0000);
|
||||
lcdWriteReg(0x7A,0x0000);
|
||||
lcdWriteReg(0x79,0x0007);
|
||||
lcdWriteReg(0x07,0x0051);
|
||||
|
||||
halPolledDelay(MS2RTT(1));
|
||||
|
||||
lcdWriteReg(0x07,0x0053);
|
||||
lcdWriteReg(0x79,0x0000);
|
||||
}
|
||||
|
||||
void lld_lcdSetCursor(uint16_t x, uint16_t y) {
|
||||
if(PORTRAIT) {
|
||||
lcdWriteReg(0x0020, x);
|
||||
lcdWriteReg(0x0021, y);
|
||||
} else if(LANDSCAPE) {
|
||||
lcdWriteReg(0x0020, y);
|
||||
lcdWriteReg(0x0021, x);
|
||||
}
|
||||
}
|
||||
|
||||
static __inline void lld_lcdWriteStreamStart(void) {
|
||||
#ifdef LCD_USE_GPIO
|
||||
LCD_CS_LOW;
|
||||
lld_lcdWriteIndex(0x0022);
|
||||
#endif
|
||||
|
||||
#ifdef LCD_USE_SPI
|
||||
#endif
|
||||
|
||||
#ifdef LCD_USE_FSMC
|
||||
#endif
|
||||
LCD_CS_LOW;
|
||||
lld_lcdWriteIndex(0x0022);
|
||||
}
|
||||
|
||||
static __inline void lld_lcdWriteStreamStop(void) {
|
||||
#ifdef LCD_USE_GPIO
|
||||
LCD_CS_HIGH;
|
||||
#endif
|
||||
|
||||
#ifdef LCD_USE_SPI
|
||||
#endif
|
||||
|
||||
#ifdef LCD_USE_FSMC
|
||||
#endif
|
||||
LCD_CS_HIGH;
|
||||
}
|
||||
|
||||
__inline void lld_lcdWriteStream(uint16_t *buffer, uint16_t size) {
|
||||
|
|
@ -252,6 +142,217 @@ __inline void lld_lcdReadStream(uint16_t *buffer, size_t size) {
|
|||
/* TODO */
|
||||
}
|
||||
|
||||
#elif defined(LCD_USE_FSMC)
|
||||
|
||||
#define LCD_REG (*((volatile uint16_t *) 0x60000000)) /* RS = 0 */
|
||||
#define LCD_RAM (*((volatile uint16_t *) 0x60020000)) /* RS = 1 */
|
||||
|
||||
static __inline void lld_lcdWriteIndex(uint16_t index) {
|
||||
LCD_REG = index;
|
||||
}
|
||||
|
||||
static __inline void lld_lcdWriteData(uint16_t data) {
|
||||
LCD_RAM = data;
|
||||
}
|
||||
|
||||
static __inline void lld_lcdWriteReg(uint16_t lcdReg,uint16_t lcdRegValue) {
|
||||
LCD_REG = lcdReg;
|
||||
LCD_RAM = lcdRegValue;
|
||||
}
|
||||
|
||||
static __inline uint16_t lld_lcdReadData(void) {
|
||||
return (LCD_RAM);
|
||||
}
|
||||
|
||||
static __inline uint16_t lld_lcdReadReg(uint16_t lcdReg) {
|
||||
LCD_REG = lcdReg;
|
||||
return LCD_RAM;
|
||||
}
|
||||
|
||||
__inline void lld_lcdWriteStreamStart(void) {
|
||||
LCD_REG = 0x0022;
|
||||
}
|
||||
|
||||
__inline void lld_lcdWriteStreamStop(void) {
|
||||
|
||||
}
|
||||
|
||||
__inline void lld_lcdWriteStream(uint16_t *buffer, uint16_t size) {
|
||||
uint16_t i;
|
||||
for(i = 0; i < size; i++)
|
||||
LCD_RAM = buffer[i];
|
||||
}
|
||||
|
||||
__inline void lld_lcdReadStreamStart(void) {
|
||||
LCD_REG = 0x0022;
|
||||
}
|
||||
|
||||
__inline void lld_lcdReadStreamStop(void) {
|
||||
|
||||
}
|
||||
|
||||
__inline void lld_lcdReadStream(uint16_t *buffer, size_t size) {
|
||||
uint16_t i;
|
||||
/* throw away first value read */
|
||||
volatile uint16_t dummy = LCD_RAM;
|
||||
|
||||
for(i = 0; i < size; i++) {
|
||||
buffer[i] = LCD_RAM;
|
||||
}
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
void lld_lcdSetPowerMode(uint8_t powerMode) {
|
||||
/* TODO: implement */
|
||||
}
|
||||
|
||||
void lld_lcdInit(void) {
|
||||
palSetPadMode(LCD_RST_GPIO, LCD_RST_PIN, PAL_MODE_OUTPUT_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
|
||||
// A Good idea to reset the module before using
|
||||
LCD_RST_LOW;
|
||||
s6d1121_delay(2);
|
||||
LCD_RST_HIGH; // Hardware Reset
|
||||
s6d1121_delay(2);
|
||||
|
||||
#ifdef LCD_USE_GPIO
|
||||
// IO Default Configurations
|
||||
palSetPadMode(LCD_CS_GPIO, LCD_CS_PIN, PAL_MODE_OUTPUT_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
|
||||
palSetPadMode(LCD_WR_GPIO, LCD_WR_PIN, PAL_MODE_OUTPUT_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
|
||||
palSetPadMode(LCD_RD_GPIO, LCD_RD_PIN, PAL_MODE_OUTPUT_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
|
||||
palSetPadMode(LCD_RS_GPIO, LCD_RS_PIN, PAL_MODE_OUTPUT_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
|
||||
palSetPadMode(LCD_BL_GPIO, LCD_BL_PIN, PAL_MODE_OUTPUT_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
|
||||
|
||||
palSetGroupMode(LCD_D0_GPIO, 0x0000000F, 0, PAL_MODE_OUTPUT_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
|
||||
palSetGroupMode(LCD_D4_GPIO, 0x0000FFF0, 0, PAL_MODE_OUTPUT_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
|
||||
|
||||
LCD_CS_HIGH;
|
||||
LCD_RD_HIGH;
|
||||
LCD_WR_HIGH;
|
||||
LCD_BL_LOW;
|
||||
|
||||
|
||||
#elif defined(LCD_USE_FSMC)
|
||||
#if defined(STM32F1XX)
|
||||
/* FSMC setup. TODO: this only works for STM32F1 */
|
||||
rccEnableAHB(RCC_AHBENR_FSMCEN, 0);
|
||||
|
||||
/* TODO: pin setup */
|
||||
#elif defined(STM32F4XX)
|
||||
/* STM32F4 FSMC init */
|
||||
rccEnableAHB3(RCC_AHB3ENR_FSMCEN, 0);
|
||||
|
||||
/* set pins to FSMC mode */
|
||||
IOBus busD = {GPIOD, (1 << 0) | (1 << 1) | (1 << 4) | (1 << 5) | (1 << 7) | (1 << 8) |
|
||||
(1 << 9) | (1 << 10) | (1 << 11) | (1 << 14) | (1 << 15), 0};
|
||||
|
||||
IOBus busE = {GPIOE, (1 << 7) | (1 << 8) | (1 << 9) | (1 << 10) | (1 << 11) | (1 << 12) |
|
||||
(1 << 13) | (1 << 14) | (1 << 15), 0};
|
||||
|
||||
palSetBusMode(&busD, PAL_MODE_ALTERNATE(12));
|
||||
palSetBusMode(&busE, PAL_MODE_ALTERNATE(12));
|
||||
#else
|
||||
#error "FSMC not implemented for this device"
|
||||
#endif
|
||||
int FSMC_Bank = 0;
|
||||
/* FSMC timing */
|
||||
FSMC_Bank1->BTCR[FSMC_Bank+1] = (10) | (10 << 8) | (10 << 16);
|
||||
|
||||
/* Bank1 NOR/SRAM control register configuration */
|
||||
FSMC_Bank1->BTCR[FSMC_Bank] = FSMC_BCR1_MWID_0 | FSMC_BCR1_WREN | FSMC_BCR1_MBKEN;
|
||||
#endif
|
||||
|
||||
lld_lcdWriteReg(0x11,0x2004);
|
||||
lld_lcdWriteReg(0x13,0xCC00);
|
||||
lld_lcdWriteReg(0x15,0x2600);
|
||||
lld_lcdWriteReg(0x14,0x252A);
|
||||
lld_lcdWriteReg(0x12,0x0033);
|
||||
lld_lcdWriteReg(0x13,0xCC04);
|
||||
|
||||
s6d1121_delay(1);
|
||||
|
||||
lld_lcdWriteReg(0x13,0xCC06);
|
||||
|
||||
s6d1121_delay(1);
|
||||
|
||||
lld_lcdWriteReg(0x13,0xCC4F);
|
||||
|
||||
s6d1121_delay(1);
|
||||
|
||||
lld_lcdWriteReg(0x13,0x674F);
|
||||
lld_lcdWriteReg(0x11,0x2003);
|
||||
|
||||
s6d1121_delay(1);
|
||||
|
||||
// Gamma Setting
|
||||
lld_lcdWriteReg(0x30,0x2609);
|
||||
lld_lcdWriteReg(0x31,0x242C);
|
||||
lld_lcdWriteReg(0x32,0x1F23);
|
||||
lld_lcdWriteReg(0x33,0x2425);
|
||||
lld_lcdWriteReg(0x34,0x2226);
|
||||
lld_lcdWriteReg(0x35,0x2523);
|
||||
lld_lcdWriteReg(0x36,0x1C1A);
|
||||
lld_lcdWriteReg(0x37,0x131D);
|
||||
lld_lcdWriteReg(0x38,0x0B11);
|
||||
lld_lcdWriteReg(0x39,0x1210);
|
||||
lld_lcdWriteReg(0x3A,0x1315);
|
||||
lld_lcdWriteReg(0x3B,0x3619);
|
||||
lld_lcdWriteReg(0x3C,0x0D00);
|
||||
lld_lcdWriteReg(0x3D,0x000D);
|
||||
|
||||
lld_lcdWriteReg(0x16,0x0007);
|
||||
lld_lcdWriteReg(0x02,0x0013);
|
||||
lld_lcdWriteReg(0x03,0x0003);
|
||||
lld_lcdWriteReg(0x01,0x0127);
|
||||
|
||||
s6d1121_delay(1);
|
||||
|
||||
lld_lcdWriteReg(0x08,0x0303);
|
||||
lld_lcdWriteReg(0x0A,0x000B);
|
||||
lld_lcdWriteReg(0x0B,0x0003);
|
||||
lld_lcdWriteReg(0x0C,0x0000);
|
||||
lld_lcdWriteReg(0x41,0x0000);
|
||||
lld_lcdWriteReg(0x50,0x0000);
|
||||
lld_lcdWriteReg(0x60,0x0005);
|
||||
lld_lcdWriteReg(0x70,0x000B);
|
||||
lld_lcdWriteReg(0x71,0x0000);
|
||||
lld_lcdWriteReg(0x78,0x0000);
|
||||
lld_lcdWriteReg(0x7A,0x0000);
|
||||
lld_lcdWriteReg(0x79,0x0007);
|
||||
lld_lcdWriteReg(0x07,0x0051);
|
||||
|
||||
s6d1121_delay(1);
|
||||
|
||||
lld_lcdWriteReg(0x07,0x0053);
|
||||
lld_lcdWriteReg(0x79,0x0000);
|
||||
|
||||
lld_lcdResetWindow();
|
||||
}
|
||||
|
||||
void lld_lcdSetCursor(uint16_t x, uint16_t y) {
|
||||
/* R20h - 8 bit
|
||||
* R21h - 9 bit
|
||||
*/
|
||||
switch(lcdGetOrientation()) {
|
||||
case portraitInv:
|
||||
lld_lcdWriteReg(0x0020, (SCREEN_WIDTH-1-x) & 0x00FF);
|
||||
lld_lcdWriteReg(0x0021, (SCREEN_HEIGHT-1-y) & 0x01FF);
|
||||
break;
|
||||
case portrait:
|
||||
lld_lcdWriteReg(0x0020, x & 0x00FF);
|
||||
lld_lcdWriteReg(0x0021, y & 0x01FF);
|
||||
break;
|
||||
case landscape:
|
||||
lld_lcdWriteReg(0x0020, y & 0x00FF);
|
||||
lld_lcdWriteReg(0x0021, x & 0x01FF);
|
||||
break;
|
||||
case landscapeInv:
|
||||
lld_lcdWriteReg(0x0020, (SCREEN_WIDTH - y - 1) & 0x00FF);
|
||||
lld_lcdWriteReg(0x0021, (SCREEN_HEIGHT - x - 1) & 0x01FF);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
void lld_lcdFillArea(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, uint16_t color) {
|
||||
uint32_t index = 0, area;
|
||||
|
||||
|
|
@ -265,6 +366,8 @@ void lld_lcdFillArea(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, uint16_
|
|||
lld_lcdWriteData(color);
|
||||
|
||||
lld_lcdWriteStreamStop();
|
||||
|
||||
lld_lcdResetWindow();
|
||||
}
|
||||
|
||||
// Do not use now, will be fixed in future
|
||||
|
|
@ -273,64 +376,85 @@ void lld_lcdSetOrientation(uint8_t newOrientation) {
|
|||
|
||||
switch(orientation) {
|
||||
case portrait:
|
||||
lcdWriteReg(0x03, 0x03);
|
||||
lld_lcdWriteReg(0x0001,0x0127);
|
||||
lld_lcdWriteReg(0x03, 0b0011);
|
||||
lcd_height = SCREEN_HEIGHT;
|
||||
lcd_width = SCREEN_WIDTH;
|
||||
break;
|
||||
case landscape:
|
||||
// Not implemented yet
|
||||
lld_lcdWriteReg(0x0001,0x0027);
|
||||
lld_lcdWriteReg(0x0003, 0b1011);
|
||||
lcd_height = SCREEN_WIDTH;
|
||||
lcd_width = SCREEN_HEIGHT;
|
||||
break;
|
||||
case portraitInv:
|
||||
// Not implemented yet
|
||||
lld_lcdWriteReg(0x0001,0x0127);
|
||||
lld_lcdWriteReg(0x0003, 0b0000);
|
||||
lcd_height = SCREEN_HEIGHT;
|
||||
lcd_width = SCREEN_WIDTH;
|
||||
break;
|
||||
case landscapeInv:
|
||||
// Not implemented yet
|
||||
lld_lcdWriteReg(0x0001,0x0027);
|
||||
lld_lcdWriteReg(0x0003, 0b1000);
|
||||
lcd_height = SCREEN_WIDTH;
|
||||
lcd_width = SCREEN_HEIGHT;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
void lld_lcdResetWindow(void) {
|
||||
switch(lcdGetOrientation()) {
|
||||
case portrait:
|
||||
case portraitInv:
|
||||
lld_lcdSetWindow(0, 0, SCREEN_WIDTH, SCREEN_HEIGHT);
|
||||
break;
|
||||
case landscape:
|
||||
case landscapeInv:
|
||||
lld_lcdSetWindow(0, 0, SCREEN_HEIGHT, SCREEN_WIDTH);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
void lld_lcdSetWindow(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1) {
|
||||
/* HSA / HEA are 8 bit
|
||||
* VSA / VEA are 9 bit
|
||||
* use masks 0x00FF and 0x01FF to enforce this
|
||||
*/
|
||||
switch(lcdGetOrientation()) {
|
||||
case portrait:
|
||||
lcdWriteReg(0x46, ((x1-1) << 8) | x0);
|
||||
lcdWriteReg(0x48, y0);
|
||||
lcdWriteReg(0x47, y1-1);
|
||||
lld_lcdWriteReg(0x46, (((x1-1) & 0x00FF) << 8) | (x0 & 0x00FF));
|
||||
lld_lcdWriteReg(0x48, y0 & 0x01FF);
|
||||
lld_lcdWriteReg(0x47, (y1-1) & 0x01FF);
|
||||
break;
|
||||
case landscape:
|
||||
lcdWriteReg(0x46, ((x0-1) << 8) | x1);
|
||||
lcdWriteReg(0x48, x0);
|
||||
lcdWriteReg(0x47, x1-1);
|
||||
lld_lcdWriteReg(0x46, (((y1-1) & 0x00FF) << 8) | (y1 & 0x00FF));
|
||||
lld_lcdWriteReg(0x48, x0 & 0x01FF);
|
||||
lld_lcdWriteReg(0x47, (x1-1) & 0x01FF);
|
||||
break;
|
||||
case portraitInv:
|
||||
lcdWriteReg(0x46, ((x1-1) << 8) | x0);
|
||||
lcdWriteReg(0x48, y0);
|
||||
lcdWriteReg(0x47, y1-1);
|
||||
lld_lcdWriteReg(0x46, (((SCREEN_WIDTH-x0-1) & 0x00FF) << 8) | ((SCREEN_WIDTH - x1) & 0x00FF));
|
||||
lld_lcdWriteReg(0x48, (SCREEN_HEIGHT-y1) & 0x01FF);
|
||||
lld_lcdWriteReg(0x47, (SCREEN_HEIGHT-y0-1) & 0x01FF);
|
||||
break;
|
||||
case landscapeInv:
|
||||
lcdWriteReg(0x46, ((y0-1) << 8) | y1);
|
||||
lcdWriteReg(0x48, x0);
|
||||
lcdWriteReg(0x47, x1-1);
|
||||
lld_lcdWriteReg(0x46, (((SCREEN_WIDTH - y0 - 1) & 0x00FF) << 8) | ((SCREEN_WIDTH - y1) & 0x00FF));
|
||||
lld_lcdWriteReg(0x48, (SCREEN_HEIGHT - x1) & 0x01FF);
|
||||
lld_lcdWriteReg(0x47, (SCREEN_HEIGHT - x0 - 1) & 0x01FF);
|
||||
break;
|
||||
}
|
||||
|
||||
lld_lcdSetCursor(x0, y0);
|
||||
lld_lcdSetCursor(x0, y0);
|
||||
}
|
||||
|
||||
void lld_lcdClear(uint16_t color) {
|
||||
uint32_t index = 0;
|
||||
lld_lcdSetCursor(0, 0);
|
||||
lld_lcdWriteStreamStart();
|
||||
|
||||
lld_lcdSetCursor(0,0);
|
||||
LCD_CS_LOW;
|
||||
lld_lcdWriteIndex(0x0022);
|
||||
for(index = 0; index < SCREEN_WIDTH * SCREEN_HEIGHT; index++)
|
||||
lld_lcdWriteData(color);
|
||||
LCD_CS_HIGH;
|
||||
lld_lcdWriteData(color);
|
||||
|
||||
lld_lcdWriteStreamStop();
|
||||
}
|
||||
|
||||
// Do not use!
|
||||
|
|
@ -338,18 +462,19 @@ uint16_t lld_lcdGetPixelColor(uint16_t x, uint16_t y) {
|
|||
uint16_t dummy;
|
||||
|
||||
lld_lcdSetCursor(x,y);
|
||||
LCD_CS_LOW;
|
||||
lld_lcdWriteIndex(0x0022);
|
||||
lld_lcdWriteStreamStart();
|
||||
|
||||
dummy = lld_lcdReadData();
|
||||
dummy = lld_lcdReadData();
|
||||
LCD_CS_HIGH;
|
||||
|
||||
lld_lcdWriteStreamStop();
|
||||
|
||||
return dummy;
|
||||
}
|
||||
|
||||
void lld_lcdDrawPixel(uint16_t x, uint16_t y, uint16_t color) {
|
||||
lld_lcdSetCursor(x, y);
|
||||
lcdWriteReg(0x0022, color);
|
||||
lld_lcdWriteReg(0x0022, color);
|
||||
}
|
||||
|
||||
uint16_t lld_lcdGetOrientation(void) {
|
||||
|
|
@ -369,7 +494,6 @@ uint16_t lld_lcdGetWidth(void) {
|
|||
void lld_lcdVerticalScroll(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, int16_t lines) {
|
||||
uint16_t row0, row1;
|
||||
uint16_t i;
|
||||
lld_lcdSetWindow(x0, y0, x1, y1);
|
||||
|
||||
for(i = 0; i < ((y1-y0) - abs(lines)); i++) {
|
||||
if(lines > 0) {
|
||||
|
|
@ -391,8 +515,9 @@ void lld_lcdVerticalScroll(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, i
|
|||
lld_lcdWriteStream(buf, x1-x0);
|
||||
lld_lcdWriteStreamStop();
|
||||
}
|
||||
|
||||
lld_lcdResetWindow();
|
||||
}
|
||||
|
||||
|
||||
#endif
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue