diff --git a/drivers/gdisp/SSD1289/readme.txt b/drivers/gdisp/SSD1289/readme.txt
index f6b265a7..80d2bdab 100644
--- a/drivers/gdisp/SSD1289/readme.txt
+++ b/drivers/gdisp/SSD1289/readme.txt
@@ -1,6 +1,6 @@
 To use this driver:
 
-1. Add in your halconf.h:
+1. Add in your gfxconf.h:
 	a) #define GFX_USE_GDISP	TRUE
 
 	b) Any optional high level driver defines (see gdisp.h) eg: GDISP_NEED_MULTITHREAD
@@ -9,8 +9,8 @@ To use this driver:
 		and ensure it is on your include path.
 		Use the gdisp_lld_board_example.h or gdisp_lld_board_fsmc.h file as a basis.
 		Currently known boards are:
-		 	BOARD_FIREBULL_STM32_F103	- GPIO interface: requires GDISP_CMD_PORT and GDISP_DATA_PORT to be defined
-		 	BOARD_ST_STM32F4_DISCOVERY  - FSMC interface
+			BOARD_FIREBULL_STM32_F103 - GPIO interface: requires GDISP_CMD_PORT and GDISP_DATA_PORT to be defined
+			BOARD_ST_STM32F4_DISCOVERY - FSMC interface
 
 	d) The following are optional - define them if you are not using the defaults below:
 		#define GDISP_SCREEN_WIDTH	320
diff --git a/drivers/gdisp/SSD2119/readme.txt b/drivers/gdisp/SSD2119/readme.txt
index 371df813..23d82eb7 100644
--- a/drivers/gdisp/SSD2119/readme.txt
+++ b/drivers/gdisp/SSD2119/readme.txt
@@ -4,17 +4,20 @@ Driver for LCD with 16-bit 8080 interface (65k colors).
 
 To use this driver:
 
-1. Add in your halconf.h:
+1. Add in your gfxconf.h:
 	a) #define GFX_USE_GDISP	TRUE
 
 	b) Any optional high level driver defines (see gdisp.h) eg: GDISP_NEED_MULTITHREAD
 
 	c) If you are not using a known board then create a gdisp_lld_board.h file
-		and ensure it is on your include path.
-		Use the gdisp_lld_board_embest_dmstf4bb_fsmc.h file as a basis.
+		and ensure it is on your include path. Use the gdisp_lld_board_embest_dmstf4bb.h
+		file as a basis.
 		Currently known boards are:
-			BOARD_EMBEST_DMSTF4BB_FSMC	- FSMC interface
-		Board configuration assume that you have STM32_PWM_USE_TIM4 set to TRUE in your mcuconf.h.
+			BOARD_EMBEST_DMSTF4BB - FSMC interface
+				This board configuration assumes that you have PWM driver enabled
+				and STM32_PWM_USE_TIM4 set to TRUE in your mcuconf.h.
+		If you use FSMC, define in your board file GDISP_USE_FSMC. If you use DMA,
+		define GDISP_USE_DMA.
 
 	d) The following are optional - define them if you are not using the defaults below:
 		#define GDISP_SCREEN_WIDTH	320