eCos Synthetic framebuffer is now a supported "base" board.

boards/base/eCos-Synthetic-Framebuffer/board.mk

@@ -0,0 +1,5 @@
+GFXINC  += $(GFXLIB)/boards/base/eCos-Synthetic-Framebuffer
+GFXSRC  +=
+GFXDEFS += -DGFX_USE_OS_ECOS=TRUE
+
+include $(GFXLIB)/drivers/gdisp/framebuffer/driver.mk

boards/base/eCos-Synthetic-Framebuffer/board_framebuffer.h

@@ -20,7 +20,7 @@
 #endif
 
 // Uncomment this if your frame buffer device requires flushing ("Synch" in eCos speak)
-//#define GDISP_HARDWARE_FLUSH		TRUE
+#define GDISP_HARDWARE_FLUSH		TRUE
 
 #ifdef GDISP_DRIVER_VMT
 
@@ -28,7 +28,6 @@
 
 	// SET THIS HERE!!!
 	// This must also match the pixel format above
-	//#define FRAMEBUF		640x480x16
 	#define FRAMEBUF		fb0
 
 	static void board_init(GDisplay *g, fbInfo *fbi) {

boards/base/eCos-Synthetic-Framebuffer/example/Makefile

@@ -0,0 +1,165 @@
+#
+#       !!!! Do NOT edit this makefile with an editor which replace tabs by spaces !!!!
+#
+##############################################################################################
+#
+# On command line:
+#
+# make INSTALL_DIR=/path/to/ecos/install all = Create project
+#
+# make clean = Clean project files.
+#
+# To rebuild project do "make clean" and "make all".
+#
+
+##############################################################################################
+# Start of default section
+#
+
+INSTALL_DIR=$$(INSTALL_DIR) # override on make command line
+
+include $(INSTALL_DIR)/include/pkgconf/ecos.mak
+
+CC           = $(ECOS_COMMAND_PREFIX)gcc
+AS           = $(CC) -x assembler-with-cpp
+CXX          = $(CC)
+LD           = $(CC)
+CFLAGS       = -I$(INSTALL_DIR)/include
+CXXFLAGS     = $(CFLAGS) -g
+LDFLAGS      = -nostartfiles -L$(INSTALL_DIR)/lib -Ttarget.ld
+
+# List all default C defines here, like -D_DEBUG=1
+DDEFS = 
+
+# List all default ASM defines here, like -D_DEBUG=1
+DADEFS =
+
+# List all default directories to look for include files here
+DINCDIR =
+
+# List the default directory to look for the libraries here
+DLIBDIR =
+
+# List all default libraries here
+DLIBS =
+
+#
+# End of default section
+##############################################################################################
+
+##############################################################################################
+# Start of user section
+#
+
+# Define project name here
+PROJECT = ugfx_over_ecos
+
+# Imported source files and paths for uGFX
+GFXLIB = ../ugfx
+
+include ${GFXLIB}/gfx.mk
+include ${GFXLIB}/boards/base/eCos-Synthetic-Framebuffer/board.mk
+
+# Where is our source code - alter these for your project.
+# Either just include the demo makefile or add your own definitions
+include $(GFXLIB)/demos/modules/gdisp/basics/demo.mk
+
+#MYFILES =
+#MYCSRC  =
+#MYDEFS  =
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS = $(MYDEFS) $(GFXDEFS)
+
+# Define ASM defines here
+UADEFS =
+
+# List C source files here
+SRC  = $(GFXSRC) \
+       $(MYCSRC)
+
+# List ASM source files here
+ASRC =
+
+# List all user directories here
+UINCDIR = $(MYFILES) $(GFXINC)
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+# Define optimisation level here
+OPT = -ggdb -O0 -fomit-frame-pointer
+
+#
+# End of user defines
+##############################################################################################
+
+INCDIR  = $(patsubst %,-I%,$(DINCDIR) $(UINCDIR))
+LIBDIR  = $(patsubst %,-L%,$(DLIBDIR) $(ULIBDIR))
+DEFS    = $(DDEFS) $(UDEFS)
+ADEFS   = $(DADEFS) $(UADEFS)
+OBJS    = $(ASRC:.s=.o) $(SRC:.c=.o)
+LIBS    = $(DLIBS) $(ULIBS)
+
+ASFLAGS = -Wa,-amhls=$(<:.s=.lst) $(ADEFS)
+CPFLAGS = $(OPT) -Wall -Wextra -Wstrict-prototypes -fverbose-asm $(DEFS) 
+
+ifeq ($(HOST_OSX),yes)
+  ifeq ($(OSX_SDK),)
+    OSX_SDK = /Developer/SDKs/MacOSX10.7.sdk
+  endif
+  ifeq ($(OSX_ARCH),)
+    OSX_ARCH = -mmacosx-version-min=10.3 -arch i386
+  endif
+
+  CPFLAGS += -isysroot $(OSX_SDK) $(OSX_ARCH)
+  LDFLAGS = -Wl -Map=$(PROJECT).map,-syslibroot,$(OSX_SDK),$(LIBDIR)
+  LIBS += $(OSX_ARCH)
+else
+  # Linux, or other
+  CPFLAGS += -m32 -Wa,-alms=$(<:.c=.lst) -I$(INSTALL_DIR)/include
+  LDFLAGS = -g -nostdlib -m32 -Wl,-Map=$(PROJECT).map,--cref,--no-warn-mismatch $(LIBDIR) -nostartfiles -L$(INSTALL_DIR)/lib -Ttarget.ld
+endif
+
+# Generate dependency information
+CPFLAGS += -MD -MP -MF .dep/$(@F).d
+
+#
+# makefile rules
+#
+
+all: $(OBJS) $(PROJECT)
+
+%.o : %.c
+	$(CC) -c $(CPFLAGS) -I . $(INCDIR) $< -o $@
+
+%.o : %.s
+	$(AS) -c $(ASFLAGS) $< -o $@
+
+$(PROJECT): $(OBJS)
+	$(CC) $(OBJS) $(LDFLAGS) $(LIBS) -o $@
+
+gcov:
+	-mkdir gcov
+	$(COV) -u $(subst /,\,$(SRC))
+	-mv *.gcov ./gcov
+
+clean:                                      
+	-rm -f $(OBJS)
+	-rm -f $(PROJECT)
+	-rm -f $(PROJECT).map
+	-rm -f $(SRC:.c=.c.bak)
+	-rm -f $(SRC:.c=.lst)
+	-rm -f $(ASRC:.s=.s.bak)
+	-rm -f $(ASRC:.s=.lst)
+	-rm -fR .dep
+
+#
+# Include the dependency files, should be the last of the makefile
+#
+-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
+
+# *** EOF ***

boards/base/eCos-Synthetic-Framebuffer/example/readme.txt

@@ -0,0 +1,7 @@
+Copy these files into your own project directory and alter them to suite.
+
+Notes:
+
+1/ Look at the MYFILES definition and the MYCSRC definition.
+2/ To run please install eCos synthetic framebuffer according to the documentation.
+3/ Call application ./ugfx_over_ecos -io

boards/base/eCos-Synthetic-Framebuffer/readme.txt

@@ -0,0 +1,11 @@
+This directory contains the interface for eCos using a synthetic framebuffer display.
+
+
+
+On this board uGFX currently supports:
+
+	- GDISP via the framebuffer driver
+
+
+
+There is an example Makefile and project in the examples directory.