diff --git a/boards/base/Linux-Framebuffer/board_framebuffer.h b/boards/base/Linux-Framebuffer/board_framebuffer.h
index e1836527..9b760e08 100644
--- a/boards/base/Linux-Framebuffer/board_framebuffer.h
+++ b/boards/base/Linux-Framebuffer/board_framebuffer.h
@@ -123,7 +123,7 @@
 		}
 		if (fb_var.red.offset != LLDCOLOR_SHIFT_R || fb_var.green.offset != LLDCOLOR_SHIFT_G || fb_var.blue.offset != LLDCOLOR_SHIFT_B) {
 			#if LLDCOLOR_SHIFT_B == 0
-				fprintf(stderr, "GDISP Framebuffer: THe display pixel format is not RGB\n");
+				fprintf(stderr, "GDISP Framebuffer: The display pixel format is not RGB\n");
 			#else
 				fprintf(stderr, "GDISP Framebuffer: The display pixel format is not BGR\n");
 			#endif
diff --git a/boards/base/RaspberryPi/readme.txt b/boards/base/RaspberryPi/readme.txt
index d4a59bf2..6ff2246f 100644
--- a/boards/base/RaspberryPi/readme.txt
+++ b/boards/base/RaspberryPi/readme.txt
@@ -1,15 +1,20 @@
-This directory contains the interface for the Raspberry Pi framebuffer.
+This directory contains the interface for the Raspberry Pi direct hardware framebuffer.
 This talks directly to the raspberry pi hardware (not via a linux framebuffer driver).
 
+If you are using linux on the Pi then consider using the linux-X or the linux-Framebuffer
+board definitions instead of this one. This is really designed for non-Linux platforms
+or where there is no linux display driver available. It will still work under linux but
+the other solutions might be better.
+
 This graphics interface is software driven - it is not an accelerated interface.
 
-This board definition should work on any operating system that will work on the Raspberry Pi
-	eg. Linux, FreeRTOS.
+The board definition should work on any operating system that will work on the Raspberry Pi
+	eg. Linux, FreeRTOS, FreeBSD.
 
 On this board uGFX currently supports:
 	- GDISP via the framebuffer driver 
 
-THe following variables may optionally be defined in your gfxconf.h or your makefile...
+The following variables may optionally be defined in your gfxconf.h or your makefile...
 	- GDISP_LLD_PIXELFORMAT			default = GDISP_PIXELFORMAT_RGB565
 	- GDISP_SCREEN_WIDTH			default = 800
 	- GDISP_SCREEN_HEIGHT			default = 600