Working STM32F746G-Discovery board + example for raw32
Working STM32LTDC video driver
This commit is contained in:
inmarket
parent
daab60de98
commit
38b0cdd5e8
@ -1,5 +1,30 @@
|
||||
GFXINC += $(GFXLIB)/boards/base/STM32F746-Discovery
|
||||
GFXSRC += $(GFXLIB)/boards/base/STM32F746-Discovery/stm32f746g_discovery_sdram.c \
|
||||
$(GFXLIB)/boards/base/STM32F746-Discovery/stm32f7xx_ll_fmc.c
|
||||
GFXDEFS += STM32F746xx
|
||||
|
||||
ifeq ($(OPT_OS),raw32)
|
||||
GFXSRC += $(HAL)/Src/stm32f7xx_hal.c \
|
||||
$(HAL)/Src/stm32f7xx_hal_cortex.c \
|
||||
$(HAL)/Src/stm32f7xx_hal_flash.c \
|
||||
$(HAL)/Src/stm32f7xx_hal_flash_ex.c \
|
||||
$(HAL)/Src/stm32f7xx_hal_rcc.c \
|
||||
$(HAL)/Src/stm32f7xx_hal_rcc_ex.h \
|
||||
$(HAL)/Src/stm32f7xx_hal_gpio.c \
|
||||
$(HAL)/Src/stm32f7xx_hal_pwr.c \
|
||||
$(HAL)/Src/stm32f7xx_hal_pwr_ex.c \
|
||||
$(HAL)/Src/stm32f7xx_hal_sdram.c \
|
||||
$(HAL)/Src/stm32f7xx_hal_dma.c
|
||||
GFXSRC += $(GFXLIB)/boards/base/STM32F746-Discovery/stm32f746g_raw32_startup.s \
|
||||
$(GFXLIB)/boards/base/STM32F746-Discovery/stm32f746g_raw32_ugfx.c \
|
||||
$(GFXLIB)/boards/base/STM32F746-Discovery/stm32f746g_raw32_system.c \
|
||||
$(GFXLIB)/boards/base/STM32F746-Discovery/stm32f746g_raw32_interrupts.c
|
||||
GFXDEFS += GFX_OS_EXTRA_INIT_FUNCTION=Raw32OSInit
|
||||
SRCFLAGS+= -std=c99
|
||||
GFXINC += $(CMSIS)/Device/ST/STM32F7xx/Include \
|
||||
$(CMSIS)/Include \
|
||||
$(HAL)/Inc
|
||||
LDSCRIPT = $(GFXLIB)/boards/base/STM32F746-Discovery/stm32f746nghx_flash.ld
|
||||
endif
|
||||
|
||||
include $(GFXLIB)/drivers/gdisp/STM32LTDC/driver.mk
|
||||
@ -12,10 +12,8 @@
|
||||
#include "stm32f746g_discovery_sdram.h"
|
||||
#include <string.h>
|
||||
|
||||
#include "RGB565_480x272.h"
|
||||
|
||||
static const ltdcConfig driverCfg = {
|
||||
480, 270, // Width, Height (pixels)
|
||||
480, 272, // Width, Height (pixels)
|
||||
41, 10, // Horizontal, Vertical sync (pixels)
|
||||
13, 2, // Horizontal, Vertical back porch (pixels)
|
||||
32, 2, // Horizontal, Vertical front porch (pixels)
|
||||
@ -23,12 +21,12 @@ static const ltdcConfig driverCfg = {
|
||||
0x000000, // Clear color (RGB888)
|
||||
|
||||
{ // Background layer config
|
||||
(LLDCOLOR_TYPE *)RGB565_480x272, // Frame buffer address
|
||||
480, 270, // Width, Height (pixels)
|
||||
(LLDCOLOR_TYPE *)SDRAM_DEVICE_ADDR, // Frame buffer address
|
||||
480, 272, // Width, Height (pixels)
|
||||
480 * LTDC_PIXELBYTES, // Line pitch (bytes)
|
||||
LTDC_PIXELFORMAT, // Pixel format
|
||||
0, 0, // Start pixel position (x, y)
|
||||
480, 270, // Size of virtual layer (cx, cy)
|
||||
480, 272, // Size of virtual layer (cx, cy)
|
||||
LTDC_COLOR_FUCHSIA, // Default color (ARGB8888)
|
||||
0x980088, // Color key (RGB888)
|
||||
LTDC_BLEND_FIX1_FIX2, // Blending factors
|
||||
@ -41,6 +39,80 @@ static const ltdcConfig driverCfg = {
|
||||
LTDC_UNUSED_LAYER_CONFIG // Foreground layer config
|
||||
};
|
||||
|
||||
/**
|
||||
* @brief LCD special pins
|
||||
*/
|
||||
/* Display enable pin */
|
||||
#define LCD_DISP_PIN GPIO_PIN_12
|
||||
#define LCD_DISP_GPIO_PORT GPIOI
|
||||
|
||||
/* Backlight control pin */
|
||||
#define LCD_BL_CTRL_PIN GPIO_PIN_3
|
||||
#define LCD_BL_CTRL_GPIO_PORT GPIOK
|
||||
|
||||
/* Display timing */
|
||||
#define RK043FN48H_FREQUENCY_DIVIDER 5
|
||||
|
||||
static void SetBoardPinDirectionsForLCD(void)
|
||||
{
|
||||
GPIO_InitTypeDef gpio_init_structure;
|
||||
|
||||
// Enable GPIOs clock */
|
||||
__HAL_RCC_GPIOE_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOG_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOI_CLK_ENABLE(); // Display pin
|
||||
__HAL_RCC_GPIOJ_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOK_CLK_ENABLE(); // BL pin
|
||||
|
||||
//*** LTDC Pins configuration
|
||||
// GPIOE configuration
|
||||
gpio_init_structure.Pin = GPIO_PIN_4;
|
||||
gpio_init_structure.Mode = GPIO_MODE_AF_PP;
|
||||
gpio_init_structure.Pull = GPIO_NOPULL;
|
||||
gpio_init_structure.Speed = GPIO_SPEED_FAST;
|
||||
gpio_init_structure.Alternate = GPIO_AF14_LTDC;
|
||||
HAL_GPIO_Init(GPIOE, &gpio_init_structure);
|
||||
|
||||
// GPIOG configuration
|
||||
gpio_init_structure.Pin = GPIO_PIN_12;
|
||||
gpio_init_structure.Mode = GPIO_MODE_AF_PP;
|
||||
gpio_init_structure.Alternate = GPIO_AF9_LTDC;
|
||||
HAL_GPIO_Init(GPIOG, &gpio_init_structure);
|
||||
|
||||
// GPIOI LTDC alternate configuration
|
||||
gpio_init_structure.Pin = GPIO_PIN_8 | GPIO_PIN_9 | GPIO_PIN_10 | \
|
||||
GPIO_PIN_13 | GPIO_PIN_14 | GPIO_PIN_15;
|
||||
gpio_init_structure.Mode = GPIO_MODE_AF_PP;
|
||||
gpio_init_structure.Alternate = GPIO_AF14_LTDC;
|
||||
HAL_GPIO_Init(GPIOI, &gpio_init_structure);
|
||||
|
||||
// GPIOJ configuration
|
||||
gpio_init_structure.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_3 | \
|
||||
GPIO_PIN_4 | GPIO_PIN_5 | GPIO_PIN_6 | GPIO_PIN_7 | \
|
||||
GPIO_PIN_8 | GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_11 | \
|
||||
GPIO_PIN_13 | GPIO_PIN_14 | GPIO_PIN_15;
|
||||
gpio_init_structure.Mode = GPIO_MODE_AF_PP;
|
||||
gpio_init_structure.Alternate = GPIO_AF14_LTDC;
|
||||
HAL_GPIO_Init(GPIOJ, &gpio_init_structure);
|
||||
|
||||
// GPIOK configuration
|
||||
gpio_init_structure.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_4 | \
|
||||
GPIO_PIN_5 | GPIO_PIN_6 | GPIO_PIN_7;
|
||||
gpio_init_structure.Mode = GPIO_MODE_AF_PP;
|
||||
gpio_init_structure.Alternate = GPIO_AF14_LTDC;
|
||||
HAL_GPIO_Init(GPIOK, &gpio_init_structure);
|
||||
|
||||
// LCD_DISP GPIO configuration
|
||||
gpio_init_structure.Pin = LCD_DISP_PIN; /* LCD_DISP pin has to be manually controlled */
|
||||
gpio_init_structure.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
HAL_GPIO_Init(LCD_DISP_GPIO_PORT, &gpio_init_structure);
|
||||
|
||||
// LCD_BL_CTRL GPIO configuration
|
||||
gpio_init_structure.Pin = LCD_BL_CTRL_PIN; /* LCD_BL_CTRL pin has to be manually controlled */
|
||||
gpio_init_structure.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
HAL_GPIO_Init(LCD_BL_CTRL_GPIO_PORT, &gpio_init_structure);
|
||||
}
|
||||
|
||||
static inline void init_board(GDisplay *g) {
|
||||
|
||||
// As we are not using multiple displays we set g->board to NULL as we don't use it.
|
||||
@ -48,6 +120,14 @@ static inline void init_board(GDisplay *g) {
|
||||
|
||||
switch(g->controllerdisplay) {
|
||||
case 0:
|
||||
|
||||
// Set pin directions
|
||||
SetBoardPinDirectionsForLCD();
|
||||
|
||||
// Enable the display and turn on the backlight
|
||||
HAL_GPIO_WritePin(LCD_DISP_GPIO_PORT, LCD_DISP_PIN, GPIO_PIN_SET);
|
||||
HAL_GPIO_WritePin(LCD_BL_CTRL_GPIO_PORT, LCD_BL_CTRL_PIN, GPIO_PIN_SET);
|
||||
|
||||
#define STM32_SAISRC_NOCLOCK (0 << 23) /**< No clock. */
|
||||
#define STM32_SAISRC_PLL (1 << 23) /**< SAI_CKIN is PLL. */
|
||||
#define STM32_SAIR_DIV2 (0 << 16) /**< R divided by 2. */
|
||||
@ -55,18 +135,21 @@ static inline void init_board(GDisplay *g) {
|
||||
#define STM32_SAIR_DIV8 (2 << 16) /**< R divided by 8. */
|
||||
#define STM32_SAIR_DIV16 (3 << 16) /**< R divided by 16. */
|
||||
|
||||
// RK043FN48H LCD clock configuration
|
||||
// PLLSAI_VCO Input = HSE_VALUE/PLL_M = 1 Mhz
|
||||
// PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN = 192 Mhz
|
||||
// PLLLCDCLK = PLLSAI_VCO Output/PLLSAIR = 192/5 = 38.4 Mhz
|
||||
// LTDC clock frequency = PLLLCDCLK / LTDC_PLLSAI_DIVR_4 = 38.4/4 = 9.6Mhz
|
||||
#define STM32_PLLSAIN_VALUE 192
|
||||
#define STM32_PLLSAIQ_VALUE 7
|
||||
#define STM32_PLLSAIR_VALUE 4
|
||||
#define STM32_PLLSAIR_VALUE RK043FN48H_FREQUENCY_DIVIDER
|
||||
#define STM32_PLLSAIR_POST STM32_SAIR_DIV4
|
||||
|
||||
/* PLLSAI activation.*/
|
||||
RCC->PLLSAICFGR = (STM32_PLLSAIN_VALUE << 6) | (STM32_PLLSAIR_VALUE << 28) | (STM32_PLLSAIQ_VALUE << 24);
|
||||
RCC->DCKCFGR1 = (RCC->DCKCFGR1 & ~RCC_DCKCFGR1_PLLSAIDIVR) | STM32_PLLSAIR_POST;
|
||||
RCC->CR |= RCC_CR_PLLSAION;
|
||||
|
||||
// Initialise the SDRAM
|
||||
SDRAM_Init();
|
||||
BSP_SDRAM_Init();
|
||||
|
||||
// Clear the SDRAM
|
||||
//memset((void *)SDRAM_BANK_ADDR, 0, 0x400000);
|
||||
|
||||
@ -8,37 +8,38 @@
|
||||
# See $(GFXLIB)/tools/gmake_scripts/readme.txt for the list of variables
|
||||
OPT_OS = raw32
|
||||
OPT_THUMB = yes
|
||||
OPT_LINK_OPTIMIZE = yes
|
||||
OPT_LINK_OPTIMIZE = no
|
||||
OPT_CPU = stm32m7
|
||||
|
||||
# uGFX settings
|
||||
# See $(GFXLIB)/tools/gmake_scripts/library_ugfx.mk for the list of variables
|
||||
GFXLIB = ../uGFX
|
||||
GFXLIB = ../ugfx
|
||||
GFXBOARD = STM32F746-Discovery
|
||||
GFXDEMO = modules/gwin/widgets
|
||||
GFXDEMO = modules/gdisp/basics
|
||||
#GFXDRIVERS =
|
||||
|
||||
# ChibiOS settings
|
||||
# Note: not supported by ChibiOS yet!
|
||||
ifeq ($(OPT_OS),chibios)
|
||||
# See $(GFXLIB)/tools/gmake_scripts/os_chibios.mk for the list of variables
|
||||
CHIBIOS = ../ChibiOS
|
||||
CHIBIOS_BOARD = ST_STM32F429I_DISCOVERY
|
||||
CHIBIOS_PLATFORM = STM32F4xx
|
||||
CHIBIOS_PORT = GCC/ARMCMx/STM32F4xx
|
||||
CHIBIOS_LDSCRIPT = STM32F407xG.ld
|
||||
CHIBIOS_BOARD = ST_STM32F746_DISCOVERY
|
||||
CHIBIOS_PLATFORM = STM32F7xx
|
||||
CHIBIOS_PORT = GCC/ARMCMx/STM32F7xx
|
||||
CHIBIOS_LDSCRIPT = STM32F746.ld
|
||||
|
||||
#CHIBIOS = ../ChibiOS3
|
||||
#CHIBIOS_VERSION = 3
|
||||
#CHIBIOS_BOARD = ST_STM32F429I_DISCOVERY
|
||||
#CHIBIOS_CPUCLASS = ARMCMx
|
||||
#CHIBIOS_PLATFORM = STM32/STM32F4xx
|
||||
#CHIBIOS_PORT = stm32f4xx
|
||||
#CHIBIOS_LDSCRIPT = STM32F407xG.ld
|
||||
#CHIBIOS = ../ChibiOS3
|
||||
#CHIBIOS_VERSION = 3
|
||||
#CHIBIOS_BOARD = ST_STM32F746_DISCOVERY
|
||||
#CHIBIOS_CPUCLASS = ARMCMx
|
||||
#CHIBIOS_PLATFORM = STM32/STM32F7xx
|
||||
#CHIBIOS_PORT = stm32f7xx
|
||||
#CHIBIOS_LDSCRIPT = STM32F746.ld
|
||||
endif
|
||||
|
||||
CMSIS = CMSIS
|
||||
HAL = STM32F7xx_HAL_Driver
|
||||
CONTROLLER = STM32F746xx
|
||||
# Raw32 settings
|
||||
CMSIS = ../STM32/CMSIS
|
||||
HAL = ../STM32/STM32F7xx_HAL_Driver
|
||||
|
||||
##############################################################################################
|
||||
# Set these for your project
|
||||
@ -51,34 +52,15 @@ CXXFLAGS = -fno-rtti
|
||||
ASFLAGS =
|
||||
LDFLAGS =
|
||||
|
||||
#SRC = $(HAL)/Src/stm32f7xx_hal.c \
|
||||
$(HAL)/Src/stm32f7xx_hal_cortex.c \
|
||||
$(HAL)/Src/stm32f7xx_hal_flash.c \
|
||||
$(HAL)/Src/stm32f7xx_hal_flash_ex.c \
|
||||
$(HAL)/Src/stm32f7xx_hal_rcc.c \
|
||||
$(HAL)/Src/stm32f7xx_hal_rcc_ex.h \
|
||||
$(HAL)/Src/stm32f7xx_hal_gpio.c \
|
||||
$(HAL)/Src/stm32f7xx_hal_pwr.c \
|
||||
$(HAL)/Src/stm32f7xx_hal_pwr_ex.c \
|
||||
$(HAL)/Src/stm32f7xx_hal_ltdc.c \
|
||||
STM32746G-Discovery/stm32746g_discovery.c \
|
||||
stm32f7xx_hal_msp.c \
|
||||
stm32f7xx_it.c \
|
||||
system_stm32f7xx.c \
|
||||
ugfx_raw32_implementations.c \
|
||||
main.c \
|
||||
startup_stm32f746xx.s
|
||||
SRC =
|
||||
|
||||
OBJS =
|
||||
DEFS =
|
||||
DEFS = GOS_RAW_HEAP_SIZE=40960
|
||||
LIBS =
|
||||
INCPATH = $(CMSIS)/Device/ST/STM32F7xx/Include \
|
||||
$(CMSIS)/Include \
|
||||
$(HAL)/Inc \
|
||||
STM32746G-Discovery
|
||||
INCPATH =
|
||||
|
||||
LIBPATH =
|
||||
LDSCRIPT = stm32f746nghx_flash.ld
|
||||
LDSCRIPT =
|
||||
|
||||
##############################################################################################
|
||||
# These should be at the end
|
||||
@ -88,8 +70,3 @@ include $(GFXLIB)/tools/gmake_scripts/library_ugfx.mk
|
||||
include $(GFXLIB)/tools/gmake_scripts/os_$(OPT_OS).mk
|
||||
include $(GFXLIB)/tools/gmake_scripts/compiler_gcc.mk
|
||||
# *** EOF ***
|
||||
|
||||
#ASFLAGS = -ggdb -Wall
|
||||
#CFLAGS = -ggdb -g3 -Wall -std=c99 -O0
|
||||
#CPPFLAGS = -ggdb -Wall
|
||||
#LDFLAGS = -fdata-sections
|
||||
|
||||
94
boards/base/STM32F746-Discovery/example_raw32/openocd.cfg
Normal file
94
boards/base/STM32F746-Discovery/example_raw32/openocd.cfg
Normal file
@ -0,0 +1,94 @@
|
||||
# This is a script file for OpenOCD ?.?.?
|
||||
#
|
||||
# It is set up for the STM32F749-Discovery board using the ST-Link JTAG adaptor.
|
||||
#
|
||||
# Assuming the current directory is your project directory containing this openocd.cfg file...
|
||||
#
|
||||
# To program your device:
|
||||
#
|
||||
# openocd -f openocd.cfg -c "Burn yourfile.bin" -c shutdown
|
||||
#
|
||||
# To debug your device:
|
||||
#
|
||||
# openocd
|
||||
# (This will run openocd in gdb server debug mode. Leave it running in the background)
|
||||
#
|
||||
# gdb yourfile.elf
|
||||
# (To start gdb. Then run the following commands in gdb...)
|
||||
#
|
||||
# target remote 127.0.0.1:3333
|
||||
# monitor Debug
|
||||
# stepi
|
||||
# (This last stepi resynchronizes gdb).
|
||||
#
|
||||
# If you want to reprogram from within gdb:
|
||||
#
|
||||
# monitor Burn yourfile.bin
|
||||
#
|
||||
|
||||
echo ""
|
||||
echo "##### Loading debugger..."
|
||||
source [find interface/stlink-v2-1.cfg]
|
||||
|
||||
echo ""
|
||||
echo "##### Loading CPU..."
|
||||
source [find target/stm32f7x.cfg]
|
||||
|
||||
echo ""
|
||||
echo "##### Configuring..."
|
||||
#reset_config srst_only srst_nogate
|
||||
#cortex_m maskisr (auto|on|off)
|
||||
#cortex_m vector_catch [all|none|list]
|
||||
#cortex_m reset_config (srst|sysresetreq|vectreset)
|
||||
#gdb_breakpoint_override hard
|
||||
|
||||
proc Debug { } {
|
||||
echo ""
|
||||
echo "##### Debug Session Connected..."
|
||||
reset init
|
||||
echo "Ready..."
|
||||
}
|
||||
|
||||
proc Burn {file} {
|
||||
echo ""
|
||||
echo "##### Burning $file to device..."
|
||||
halt
|
||||
# Due to an issue with the combination of the ST-Link adapters and OpenOCD
|
||||
# applying the stm32f2x unlock 0 command actaully applies read protection - VERY BAD!
|
||||
# If this happens to you - use the ST-Link utility to set the option byte back to normal.
|
||||
# If you are using a different debugger eg a FT2232 based adapter you can uncomment the line below.
|
||||
#stm32f2x unlock 0
|
||||
#flash protect 0 0 last off
|
||||
reset halt
|
||||
flash write_image erase $file 0 elf
|
||||
verify_image $file 0x0 elf
|
||||
#flash protect 0 0 last on
|
||||
reset
|
||||
echo "Burning Complete!"
|
||||
}
|
||||
|
||||
echo ""
|
||||
echo "##### Leaving Configuration Mode..."
|
||||
init
|
||||
reset init
|
||||
flash probe 0
|
||||
flash banks
|
||||
#flash info 0
|
||||
|
||||
echo ""
|
||||
echo "##### Waiting for debug connections..."
|
||||
|
||||
##### OLD ######
|
||||
#source [find interface/stlink-v2-1.cfg]
|
||||
#source [find target/stm32f7x.cfg]
|
||||
#
|
||||
#proc flash_chip {} {
|
||||
# halt
|
||||
# reset halt
|
||||
# flash write_image erase main.elf 0 elf
|
||||
# verify_image main.elf 0 elf
|
||||
# reset
|
||||
# shutdown
|
||||
#}
|
||||
#
|
||||
#init
|
||||
@ -0,0 +1,418 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_conf.h
|
||||
* @author MCD Application Team
|
||||
* @version V1.0.0
|
||||
* @date 25-June-2015
|
||||
* @brief HAL configuration file.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F7xx_HAL_CONF_H
|
||||
#define __STM32F7xx_HAL_CONF_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/* ########################## Module Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules to be used in the HAL driver
|
||||
*/
|
||||
#define HAL_MODULE_ENABLED
|
||||
/* #define HAL_ADC_MODULE_ENABLED */
|
||||
/* #define HAL_CAN_MODULE_ENABLED */
|
||||
/* #define HAL_CEC_MODULE_ENABLED */
|
||||
/* #define HAL_CRC_MODULE_ENABLED */
|
||||
/* #define HAL_CRYP_MODULE_ENABLED */
|
||||
/* #define HAL_DAC_MODULE_ENABLED */
|
||||
/* #define HAL_DCMI_MODULE_ENABLED */
|
||||
#define HAL_DMA_MODULE_ENABLED
|
||||
/* #define HAL_DMA2D_MODULE_ENABLED */
|
||||
/* #define HAL_ETH_MODULE_ENABLED */
|
||||
#define HAL_FLASH_MODULE_ENABLED
|
||||
/* #define HAL_NAND_MODULE_ENABLED */
|
||||
/* #define HAL_NOR_MODULE_ENABLED */
|
||||
/* #define HAL_SRAM_MODULE_ENABLED */
|
||||
#define HAL_SDRAM_MODULE_ENABLED
|
||||
/* #define HAL_HASH_MODULE_ENABLED */
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
/* #define HAL_I2C_MODULE_ENABLED */
|
||||
/* #define HAL_I2S_MODULE_ENABLED */
|
||||
/* #define HAL_IWDG_MODULE_ENABLED */
|
||||
/* #define HAL_LPTIM_MODULE_ENABLED */
|
||||
/* #define HAL_LTDC_MODULE_ENABLED */
|
||||
#define HAL_PWR_MODULE_ENABLED
|
||||
/* #define HAL_QSPI_MODULE_ENABLED */
|
||||
#define HAL_RCC_MODULE_ENABLED
|
||||
/* #define HAL_RNG_MODULE_ENABLED */
|
||||
/* #define HAL_RTC_MODULE_ENABLED */
|
||||
/* #define HAL_SAI_MODULE_ENABLED */
|
||||
/* #define HAL_SD_MODULE_ENABLED */
|
||||
/* #define HAL_SPDIFRX_MODULE_ENABLED */
|
||||
/* #define HAL_SPI_MODULE_ENABLED */
|
||||
/* #define HAL_TIM_MODULE_ENABLED */
|
||||
/* #define HAL_UART_MODULE_ENABLED */
|
||||
/* #define HAL_USART_MODULE_ENABLED */
|
||||
/* #define HAL_IRDA_MODULE_ENABLED */
|
||||
/* #define HAL_SMARTCARD_MODULE_ENABLED */
|
||||
/* #define HAL_WWDG_MODULE_ENABLED */
|
||||
#define HAL_CORTEX_MODULE_ENABLED
|
||||
/* #define HAL_PCD_MODULE_ENABLED */
|
||||
/* #define HAL_HCD_MODULE_ENABLED */
|
||||
|
||||
|
||||
/* ########################## HSE/HSI Values adaptation ##################### */
|
||||
/**
|
||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSE_STARTUP_TIMEOUT)
|
||||
#define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal Low Speed oscillator (LSI) value.
|
||||
*/
|
||||
#if !defined (LSI_VALUE)
|
||||
#define LSI_VALUE ((uint32_t)40000)
|
||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature. */
|
||||
/**
|
||||
* @brief External Low Speed oscillator (LSE) value.
|
||||
*/
|
||||
#if !defined (LSE_VALUE)
|
||||
#define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
/**
|
||||
* @brief External clock source for I2S peripheral
|
||||
* This value is used by the I2S HAL module to compute the I2S clock source
|
||||
* frequency, this source is inserted directly through I2S_CKIN pad.
|
||||
*/
|
||||
#if !defined (EXTERNAL_CLOCK_VALUE)
|
||||
#define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* EXTERNAL_CLOCK_VALUE */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||
|
||||
/* ########################### System Configuration ######################### */
|
||||
/**
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */
|
||||
#define TICK_INT_PRIORITY ((uint32_t)0x0F) /*!< tick interrupt priority */
|
||||
#define USE_RTOS 0
|
||||
#define ART_ACCLERATOR_ENABLE 1 /* To enable instruction cache and prefetch */
|
||||
|
||||
/* ########################## Assert Selection ############################## */
|
||||
/**
|
||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||
* HAL drivers code
|
||||
*/
|
||||
/* #define USE_FULL_ASSERT 1 */
|
||||
|
||||
/* ################## Ethernet peripheral configuration ##################### */
|
||||
|
||||
/* Section 1 : Ethernet peripheral configuration */
|
||||
|
||||
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
|
||||
#define MAC_ADDR0 2
|
||||
#define MAC_ADDR1 0
|
||||
#define MAC_ADDR2 0
|
||||
#define MAC_ADDR3 0
|
||||
#define MAC_ADDR4 0
|
||||
#define MAC_ADDR5 0
|
||||
|
||||
/* Definition of the Ethernet driver buffers size and count */
|
||||
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
|
||||
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
|
||||
#define ETH_RXBUFNB ((uint32_t)4) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
|
||||
#define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
|
||||
|
||||
/* Section 2: PHY configuration section */
|
||||
|
||||
/* DP83848 PHY Address*/
|
||||
#define DP83848_PHY_ADDRESS 0x01
|
||||
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
|
||||
#define PHY_RESET_DELAY ((uint32_t)0x000000FF)
|
||||
/* PHY Configuration delay */
|
||||
#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF)
|
||||
|
||||
#define PHY_READ_TO ((uint32_t)0x0000FFFF)
|
||||
#define PHY_WRITE_TO ((uint32_t)0x0000FFFF)
|
||||
|
||||
/* Section 3: Common PHY Registers */
|
||||
|
||||
#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */
|
||||
#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */
|
||||
|
||||
#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
|
||||
#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
|
||||
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
|
||||
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
|
||||
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
|
||||
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
|
||||
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
|
||||
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
|
||||
#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
|
||||
#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
|
||||
|
||||
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
|
||||
#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
|
||||
#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
|
||||
|
||||
/* Section 4: Extended PHY Registers */
|
||||
|
||||
#define PHY_SR ((uint16_t)0x10) /*!< PHY status register Offset */
|
||||
#define PHY_MICR ((uint16_t)0x11) /*!< MII Interrupt Control Register */
|
||||
#define PHY_MISR ((uint16_t)0x12) /*!< MII Interrupt Status and Misc. Control Register */
|
||||
|
||||
#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */
|
||||
#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */
|
||||
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */
|
||||
|
||||
#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */
|
||||
#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */
|
||||
|
||||
#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */
|
||||
#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include module's header file
|
||||
*/
|
||||
|
||||
#ifdef HAL_RCC_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_rcc.h"
|
||||
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_gpio.h"
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_dma.h"
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_cortex.h"
|
||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_adc.h"
|
||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_can.h"
|
||||
#endif /* HAL_CAN_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CEC_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_cec.h"
|
||||
#endif /* HAL_CEC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRC_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_crc.h"
|
||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRYP_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_cryp.h"
|
||||
#endif /* HAL_CRYP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA2D_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_dma2d.h"
|
||||
#endif /* HAL_DMA2D_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_dac.h"
|
||||
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DCMI_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_dcmi.h"
|
||||
#endif /* HAL_DCMI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ETH_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_eth.h"
|
||||
#endif /* HAL_ETH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_flash.h"
|
||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SRAM_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_sram.h"
|
||||
#endif /* HAL_SRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NOR_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_nor.h"
|
||||
#endif /* HAL_NOR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NAND_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_nand.h"
|
||||
#endif /* HAL_NAND_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SDRAM_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_sdram.h"
|
||||
#endif /* HAL_SDRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HASH_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_hash.h"
|
||||
#endif /* HAL_HASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_i2c.h"
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2S_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_i2s.h"
|
||||
#endif /* HAL_I2S_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_iwdg.h"
|
||||
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LPTIM_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_lptim.h"
|
||||
#endif /* HAL_LPTIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LTDC_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_ltdc.h"
|
||||
#endif /* HAL_LTDC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_pwr.h"
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_QSPI_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_qspi.h"
|
||||
#endif /* HAL_QSPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RNG_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_rng.h"
|
||||
#endif /* HAL_RNG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RTC_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_rtc.h"
|
||||
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SAI_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_sai.h"
|
||||
#endif /* HAL_SAI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_sd.h"
|
||||
#endif /* HAL_SD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPDIFRX_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_spdifrx.h"
|
||||
#endif /* HAL_SPDIFRX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_spi.h"
|
||||
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_tim.h"
|
||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_uart.h"
|
||||
#endif /* HAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_USART_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_usart.h"
|
||||
#endif /* HAL_USART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_irda.h"
|
||||
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_smartcard.h"
|
||||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_wwdg.h"
|
||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_pcd.h"
|
||||
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HCD_MODULE_ENABLED
|
||||
#include "stm32f7xx_hal_hcd.h"
|
||||
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr: If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t* file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F7xx_HAL_CONF_H */
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
185
boards/base/STM32F746-Discovery/stm32f746g_raw32_interrupts.c
Normal file
185
boards/base/STM32F746-Discovery/stm32f746g_raw32_interrupts.c
Normal file
@ -0,0 +1,185 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file LTDC/LTDC_Display_1Layer/Src/stm32f7xx_it.c
|
||||
* @author MCD Application Team
|
||||
* @version V1.0.0
|
||||
* @date 25-June-2015
|
||||
* @brief Main Interrupt Service Routines.
|
||||
* This file provides template for all exceptions handler and
|
||||
* peripherals interrupt service routine.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Examples
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup LTDC_Display_1Layer
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
|
||||
/******************************************************************************/
|
||||
/* Cortex-M4 Processor Exceptions Handlers */
|
||||
/******************************************************************************/
|
||||
|
||||
/**
|
||||
* @brief This function handles NMI exception.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void NMI_Handler(void)
|
||||
{
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Hard Fault exception.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void HardFault_Handler(void)
|
||||
{
|
||||
/* Go to infinite loop when Hard Fault exception occurs */
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Memory Manage exception.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void MemManage_Handler(void)
|
||||
{
|
||||
/* Go to infinite loop when Memory Manage exception occurs */
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Bus Fault exception.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void BusFault_Handler(void)
|
||||
{
|
||||
/* Go to infinite loop when Bus Fault exception occurs */
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Usage Fault exception.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void UsageFault_Handler(void)
|
||||
{
|
||||
/* Go to infinite loop when Usage Fault exception occurs */
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles SVCall exception.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SVC_Handler(void)
|
||||
{
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Debug Monitor exception.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void DebugMon_Handler(void)
|
||||
{
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles PendSVC exception.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void PendSV_Handler(void)
|
||||
{
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles SysTick Handler.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SysTick_Handler(void)
|
||||
{
|
||||
HAL_IncTick();
|
||||
}
|
||||
|
||||
/******************************************************************************/
|
||||
/* STM32F7xx Peripherals Interrupt Handlers */
|
||||
/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */
|
||||
/* available peripheral interrupt handler's name please refer to the startup */
|
||||
/* file (startup_stm32f7xx.s). */
|
||||
/******************************************************************************/
|
||||
|
||||
/**
|
||||
* @brief This function handles PPP interrupt request.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
/*void PPP_IRQHandler(void)
|
||||
{
|
||||
}*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
606
boards/base/STM32F746-Discovery/stm32f746g_raw32_startup.s
Normal file
606
boards/base/STM32F746-Discovery/stm32f746g_raw32_startup.s
Normal file
@ -0,0 +1,606 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file startup_stm32f746xx.s
|
||||
* @author MCD Application Team
|
||||
* Version V1.0.0
|
||||
* Date 25-June-2015
|
||||
* @brief STM32F746xx Devices vector table for GCC based toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M7 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m7
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
ldr sp, =_estack /* set stack pointer */
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system initialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
|
||||
.global WeakCInit
|
||||
WeakCInit:
|
||||
mov pc, lr
|
||||
|
||||
.weak _init
|
||||
.thumb_set _init,WeakCInit
|
||||
|
||||
.global WeakCExit
|
||||
WeakCExit:
|
||||
b WeakCExit
|
||||
|
||||
.weak exit
|
||||
.thumb_set exit,WeakCExit
|
||||
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M7. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
*******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
|
||||
/* External Interrupts */
|
||||
.word WWDG_IRQHandler /* Window WatchDog */
|
||||
.word PVD_IRQHandler /* PVD through EXTI Line detection */
|
||||
.word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
|
||||
.word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
|
||||
.word FLASH_IRQHandler /* FLASH */
|
||||
.word RCC_IRQHandler /* RCC */
|
||||
.word EXTI0_IRQHandler /* EXTI Line0 */
|
||||
.word EXTI1_IRQHandler /* EXTI Line1 */
|
||||
.word EXTI2_IRQHandler /* EXTI Line2 */
|
||||
.word EXTI3_IRQHandler /* EXTI Line3 */
|
||||
.word EXTI4_IRQHandler /* EXTI Line4 */
|
||||
.word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
|
||||
.word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
|
||||
.word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
|
||||
.word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
|
||||
.word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
|
||||
.word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
|
||||
.word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
|
||||
.word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
|
||||
.word CAN1_TX_IRQHandler /* CAN1 TX */
|
||||
.word CAN1_RX0_IRQHandler /* CAN1 RX0 */
|
||||
.word CAN1_RX1_IRQHandler /* CAN1 RX1 */
|
||||
.word CAN1_SCE_IRQHandler /* CAN1 SCE */
|
||||
.word EXTI9_5_IRQHandler /* External Line[9:5]s */
|
||||
.word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */
|
||||
.word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */
|
||||
.word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */
|
||||
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
|
||||
.word TIM2_IRQHandler /* TIM2 */
|
||||
.word TIM3_IRQHandler /* TIM3 */
|
||||
.word TIM4_IRQHandler /* TIM4 */
|
||||
.word I2C1_EV_IRQHandler /* I2C1 Event */
|
||||
.word I2C1_ER_IRQHandler /* I2C1 Error */
|
||||
.word I2C2_EV_IRQHandler /* I2C2 Event */
|
||||
.word I2C2_ER_IRQHandler /* I2C2 Error */
|
||||
.word SPI1_IRQHandler /* SPI1 */
|
||||
.word SPI2_IRQHandler /* SPI2 */
|
||||
.word USART1_IRQHandler /* USART1 */
|
||||
.word USART2_IRQHandler /* USART2 */
|
||||
.word USART3_IRQHandler /* USART3 */
|
||||
.word EXTI15_10_IRQHandler /* External Line[15:10]s */
|
||||
.word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
|
||||
.word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */
|
||||
.word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */
|
||||
.word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */
|
||||
.word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
|
||||
.word TIM8_CC_IRQHandler /* TIM8 Capture Compare */
|
||||
.word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
|
||||
.word FMC_IRQHandler /* FMC */
|
||||
.word SDMMC1_IRQHandler /* SDMMC1 */
|
||||
.word TIM5_IRQHandler /* TIM5 */
|
||||
.word SPI3_IRQHandler /* SPI3 */
|
||||
.word UART4_IRQHandler /* UART4 */
|
||||
.word UART5_IRQHandler /* UART5 */
|
||||
.word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */
|
||||
.word TIM7_IRQHandler /* TIM7 */
|
||||
.word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
|
||||
.word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
|
||||
.word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
|
||||
.word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
|
||||
.word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
|
||||
.word ETH_IRQHandler /* Ethernet */
|
||||
.word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */
|
||||
.word CAN2_TX_IRQHandler /* CAN2 TX */
|
||||
.word CAN2_RX0_IRQHandler /* CAN2 RX0 */
|
||||
.word CAN2_RX1_IRQHandler /* CAN2 RX1 */
|
||||
.word CAN2_SCE_IRQHandler /* CAN2 SCE */
|
||||
.word OTG_FS_IRQHandler /* USB OTG FS */
|
||||
.word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
|
||||
.word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
|
||||
.word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
|
||||
.word USART6_IRQHandler /* USART6 */
|
||||
.word I2C3_EV_IRQHandler /* I2C3 event */
|
||||
.word I2C3_ER_IRQHandler /* I2C3 error */
|
||||
.word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */
|
||||
.word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */
|
||||
.word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */
|
||||
.word OTG_HS_IRQHandler /* USB OTG HS */
|
||||
.word DCMI_IRQHandler /* DCMI */
|
||||
.word 0 /* Reserved */
|
||||
.word RNG_IRQHandler /* Rng */
|
||||
.word FPU_IRQHandler /* FPU */
|
||||
.word UART7_IRQHandler /* UART7 */
|
||||
.word UART8_IRQHandler /* UART8 */
|
||||
.word SPI4_IRQHandler /* SPI4 */
|
||||
.word SPI5_IRQHandler /* SPI5 */
|
||||
.word SPI6_IRQHandler /* SPI6 */
|
||||
.word SAI1_IRQHandler /* SAI1 */
|
||||
.word LTDC_IRQHandler /* LTDC */
|
||||
.word LTDC_ER_IRQHandler /* LTDC error */
|
||||
.word DMA2D_IRQHandler /* DMA2D */
|
||||
.word SAI2_IRQHandler /* SAI2 */
|
||||
.word QUADSPI_IRQHandler /* QUADSPI */
|
||||
.word LPTIM1_IRQHandler /* LPTIM1 */
|
||||
.word CEC_IRQHandler /* HDMI_CEC */
|
||||
.word I2C4_EV_IRQHandler /* I2C4 Event */
|
||||
.word I2C4_ER_IRQHandler /* I2C4 Error */
|
||||
.word SPDIF_RX_IRQHandler /* SPDIF_RX */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMP_STAMP_IRQHandler
|
||||
.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_WKUP_IRQHandler
|
||||
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream0_IRQHandler
|
||||
.thumb_set DMA1_Stream0_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream1_IRQHandler
|
||||
.thumb_set DMA1_Stream1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream2_IRQHandler
|
||||
.thumb_set DMA1_Stream2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream3_IRQHandler
|
||||
.thumb_set DMA1_Stream3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream4_IRQHandler
|
||||
.thumb_set DMA1_Stream4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream5_IRQHandler
|
||||
.thumb_set DMA1_Stream5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream6_IRQHandler
|
||||
.thumb_set DMA1_Stream6_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC_IRQHandler
|
||||
.thumb_set ADC_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_TX_IRQHandler
|
||||
.thumb_set CAN1_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX0_IRQHandler
|
||||
.thumb_set CAN1_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX1_IRQHandler
|
||||
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_SCE_IRQHandler
|
||||
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_TIM9_IRQHandler
|
||||
.thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_TIM10_IRQHandler
|
||||
.thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_TIM11_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_WKUP_IRQHandler
|
||||
.thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_BRK_TIM12_IRQHandler
|
||||
.thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_UP_TIM13_IRQHandler
|
||||
.thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_TRG_COM_TIM14_IRQHandler
|
||||
.thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_CC_IRQHandler
|
||||
.thumb_set TIM8_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Stream7_IRQHandler
|
||||
.thumb_set DMA1_Stream7_IRQHandler,Default_Handler
|
||||
|
||||
.weak FMC_IRQHandler
|
||||
.thumb_set FMC_IRQHandler,Default_Handler
|
||||
|
||||
.weak SDMMC1_IRQHandler
|
||||
.thumb_set SDMMC1_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_DAC_IRQHandler
|
||||
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream0_IRQHandler
|
||||
.thumb_set DMA2_Stream0_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream1_IRQHandler
|
||||
.thumb_set DMA2_Stream1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream2_IRQHandler
|
||||
.thumb_set DMA2_Stream2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream3_IRQHandler
|
||||
.thumb_set DMA2_Stream3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream4_IRQHandler
|
||||
.thumb_set DMA2_Stream4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream4_IRQHandler
|
||||
.thumb_set DMA2_Stream4_IRQHandler,Default_Handler
|
||||
|
||||
.weak ETH_IRQHandler
|
||||
.thumb_set ETH_IRQHandler,Default_Handler
|
||||
|
||||
.weak ETH_WKUP_IRQHandler
|
||||
.thumb_set ETH_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_TX_IRQHandler
|
||||
.thumb_set CAN2_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_RX0_IRQHandler
|
||||
.thumb_set CAN2_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_RX1_IRQHandler
|
||||
.thumb_set CAN2_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_SCE_IRQHandler
|
||||
.thumb_set CAN2_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_IRQHandler
|
||||
.thumb_set OTG_FS_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream5_IRQHandler
|
||||
.thumb_set DMA2_Stream5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream6_IRQHandler
|
||||
.thumb_set DMA2_Stream6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Stream7_IRQHandler
|
||||
.thumb_set DMA2_Stream7_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART6_IRQHandler
|
||||
.thumb_set USART6_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C3_EV_IRQHandler
|
||||
.thumb_set I2C3_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C3_ER_IRQHandler
|
||||
.thumb_set I2C3_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_EP1_OUT_IRQHandler
|
||||
.thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_EP1_IN_IRQHandler
|
||||
.thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_WKUP_IRQHandler
|
||||
.thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_HS_IRQHandler
|
||||
.thumb_set OTG_HS_IRQHandler,Default_Handler
|
||||
|
||||
.weak DCMI_IRQHandler
|
||||
.thumb_set DCMI_IRQHandler,Default_Handler
|
||||
|
||||
.weak RNG_IRQHandler
|
||||
.thumb_set RNG_IRQHandler,Default_Handler
|
||||
|
||||
.weak FPU_IRQHandler
|
||||
.thumb_set FPU_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART7_IRQHandler
|
||||
.thumb_set UART7_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART8_IRQHandler
|
||||
.thumb_set UART8_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI4_IRQHandler
|
||||
.thumb_set SPI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI5_IRQHandler
|
||||
.thumb_set SPI5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI6_IRQHandler
|
||||
.thumb_set SPI6_IRQHandler,Default_Handler
|
||||
|
||||
.weak SAI1_IRQHandler
|
||||
.thumb_set SAI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak LTDC_IRQHandler
|
||||
.thumb_set LTDC_IRQHandler,Default_Handler
|
||||
|
||||
.weak LTDC_ER_IRQHandler
|
||||
.thumb_set LTDC_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2D_IRQHandler
|
||||
.thumb_set DMA2D_IRQHandler,Default_Handler
|
||||
|
||||
.weak SAI2_IRQHandler
|
||||
.thumb_set SAI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak QUADSPI_IRQHandler
|
||||
.thumb_set QUADSPI_IRQHandler,Default_Handler
|
||||
|
||||
.weak LPTIM1_IRQHandler
|
||||
.thumb_set LPTIM1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CEC_IRQHandler
|
||||
.thumb_set CEC_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C4_EV_IRQHandler
|
||||
.thumb_set I2C4_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C4_ER_IRQHandler
|
||||
.thumb_set I2C4_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPDIF_RX_IRQHandler
|
||||
.thumb_set SPDIF_RX_IRQHandler,Default_Handler
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
||||
504
boards/base/STM32F746-Discovery/stm32f746g_raw32_system.c
Normal file
504
boards/base/STM32F746-Discovery/stm32f746g_raw32_system.c
Normal file
@ -0,0 +1,504 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file system_stm32f7xx.c
|
||||
* @author MCD Application Team
|
||||
* @version V1.0.0
|
||||
* @date 25-June-2015
|
||||
* @brief CMSIS Cortex-M7 Device Peripheral Access Layer System Source File.
|
||||
*
|
||||
* This file provides two functions and one global variable to be called from
|
||||
* user application:
|
||||
* - SystemInit(): This function is called at startup just after reset and
|
||||
* before branch to main program. This call is made inside
|
||||
* the "startup_stm32f7xx.s" file.
|
||||
*
|
||||
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
|
||||
* by the user application to setup the SysTick
|
||||
* timer or configure other parameters.
|
||||
*
|
||||
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
|
||||
* be called whenever the core clock is changed
|
||||
* during program execution.
|
||||
*
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32f7xx_system
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F7xx_System_Private_Includes
|
||||
* @{
|
||||
*/
|
||||
|
||||
#include "stm32f7xx.h"
|
||||
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F7xx_System_Private_TypesDefinitions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F7xx_System_Private_Defines
|
||||
* @{
|
||||
*/
|
||||
|
||||
/************************* Miscellaneous Configuration ************************/
|
||||
/*!< Uncomment the following line if you need to use external SRAM or SDRAM mounted
|
||||
on EVAL board as data memory */
|
||||
/* #define DATA_IN_ExtSRAM */
|
||||
/* #define DATA_IN_ExtSDRAM */
|
||||
|
||||
#if defined(DATA_IN_ExtSRAM) && defined(DATA_IN_ExtSDRAM)
|
||||
#error "Please select DATA_IN_ExtSRAM or DATA_IN_ExtSDRAM "
|
||||
#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
|
||||
|
||||
/*!< Uncomment the following line if you need to relocate your vector Table in
|
||||
Internal SRAM. */
|
||||
/* #define VECT_TAB_SRAM */
|
||||
#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
|
||||
This value must be a multiple of 0x200. */
|
||||
/******************************************************************************/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F7xx_System_Private_Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F7xx_System_Private_Variables
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* This variable is updated in three ways:
|
||||
1) by calling CMSIS function SystemCoreClockUpdate()
|
||||
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
|
||||
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
|
||||
Note: If you use this function to configure the system clock; then there
|
||||
is no need to call the 2 first functions listed above, since SystemCoreClock
|
||||
variable is updated automatically.
|
||||
*/
|
||||
uint32_t SystemCoreClock = 16000000;
|
||||
__IO const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F7xx_System_Private_FunctionPrototypes
|
||||
* @{
|
||||
*/
|
||||
#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
|
||||
static void SystemInit_ExtMemCtl(void);
|
||||
#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F7xx_System_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Setup the microcontroller system
|
||||
* Initialize the Embedded Flash Interface, the PLL and update the
|
||||
* SystemFrequency variable.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit(void)
|
||||
{
|
||||
/* FPU settings ------------------------------------------------------------*/
|
||||
#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
|
||||
SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
|
||||
#endif
|
||||
/* Reset the RCC clock configuration to the default reset state ------------*/
|
||||
/* Set HSION bit */
|
||||
RCC->CR |= (uint32_t)0x00000001;
|
||||
|
||||
/* Reset CFGR register */
|
||||
RCC->CFGR = 0x00000000;
|
||||
|
||||
/* Reset HSEON, CSSON and PLLON bits */
|
||||
RCC->CR &= (uint32_t)0xFEF6FFFF;
|
||||
|
||||
/* Reset PLLCFGR register */
|
||||
RCC->PLLCFGR = 0x24003010;
|
||||
|
||||
/* Reset HSEBYP bit */
|
||||
RCC->CR &= (uint32_t)0xFFFBFFFF;
|
||||
|
||||
/* Disable all interrupts */
|
||||
RCC->CIR = 0x00000000;
|
||||
|
||||
#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
|
||||
SystemInit_ExtMemCtl();
|
||||
#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
|
||||
|
||||
/* Configure the Vector Table location add offset address ------------------*/
|
||||
#ifdef VECT_TAB_SRAM
|
||||
SCB->VTOR = SRAM1_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
|
||||
#else
|
||||
SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
|
||||
#endif
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Update SystemCoreClock variable according to Clock Register Values.
|
||||
* The SystemCoreClock variable contains the core clock (HCLK), it can
|
||||
* be used by the user application to setup the SysTick timer or configure
|
||||
* other parameters.
|
||||
*
|
||||
* @note Each time the core clock (HCLK) changes, this function must be called
|
||||
* to update SystemCoreClock variable value. Otherwise, any configuration
|
||||
* based on this variable will be incorrect.
|
||||
*
|
||||
* @note - The system frequency computed by this function is not the real
|
||||
* frequency in the chip. It is calculated based on the predefined
|
||||
* constant and the selected clock source:
|
||||
*
|
||||
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
|
||||
*
|
||||
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
|
||||
*
|
||||
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
|
||||
* or HSI_VALUE(*) multiplied/divided by the PLL factors.
|
||||
*
|
||||
* (*) HSI_VALUE is a constant defined in stm32f7xx.h file (default value
|
||||
* 16 MHz) but the real value may vary depending on the variations
|
||||
* in voltage and temperature.
|
||||
*
|
||||
* (**) HSE_VALUE is a constant defined in stm32f7xx.h file (default value
|
||||
* 25 MHz), user has to ensure that HSE_VALUE is same as the real
|
||||
* frequency of the crystal used. Otherwise, this function may
|
||||
* have wrong result.
|
||||
*
|
||||
* - The result of this function could be not correct when using fractional
|
||||
* value for HSE crystal.
|
||||
*
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemCoreClockUpdate(void)
|
||||
{
|
||||
uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
|
||||
|
||||
/* Get SYSCLK source -------------------------------------------------------*/
|
||||
tmp = RCC->CFGR & RCC_CFGR_SWS;
|
||||
|
||||
switch (tmp)
|
||||
{
|
||||
case 0x00: /* HSI used as system clock source */
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
case 0x04: /* HSE used as system clock source */
|
||||
SystemCoreClock = HSE_VALUE;
|
||||
break;
|
||||
case 0x08: /* PLL used as system clock source */
|
||||
|
||||
/* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
|
||||
SYSCLK = PLL_VCO / PLL_P
|
||||
*/
|
||||
pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
|
||||
pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
|
||||
|
||||
if (pllsource != 0)
|
||||
{
|
||||
/* HSE used as PLL clock source */
|
||||
pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
|
||||
}
|
||||
else
|
||||
{
|
||||
/* HSI used as PLL clock source */
|
||||
pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
|
||||
}
|
||||
|
||||
pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
|
||||
SystemCoreClock = pllvco/pllp;
|
||||
break;
|
||||
default:
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
}
|
||||
/* Compute HCLK frequency --------------------------------------------------*/
|
||||
/* Get HCLK prescaler */
|
||||
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
|
||||
/* HCLK frequency */
|
||||
SystemCoreClock >>= tmp;
|
||||
}
|
||||
|
||||
#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
|
||||
/**
|
||||
* @brief Setup the external memory controller.
|
||||
* Called in startup_stm32f7xx.s before jump to main.
|
||||
* This function configures the external memories (SRAM/SDRAM)
|
||||
* This SRAM/SDRAM will be used as program data memory (including heap and stack).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit_ExtMemCtl(void)
|
||||
{
|
||||
#if defined (DATA_IN_ExtSDRAM)
|
||||
register uint32_t tmpreg = 0, timeout = 0xFFFF;
|
||||
register uint32_t index;
|
||||
|
||||
/* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface
|
||||
clock */
|
||||
RCC->AHB1ENR |= 0x000001F8;
|
||||
|
||||
/* Connect PDx pins to FMC Alternate function */
|
||||
GPIOD->AFR[0] = 0x000000CC;
|
||||
GPIOD->AFR[1] = 0xCC000CCC;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOD->MODER = 0xA02A000A;
|
||||
/* Configure PDx pins speed to 50 MHz */
|
||||
GPIOD->OSPEEDR = 0xA02A000A;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOD->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOD->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PEx pins to FMC Alternate function */
|
||||
GPIOE->AFR[0] = 0xC00000CC;
|
||||
GPIOE->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PEx pins in Alternate function mode */
|
||||
GPIOE->MODER = 0xAAAA800A;
|
||||
/* Configure PEx pins speed to 50 MHz */
|
||||
GPIOE->OSPEEDR = 0xAAAA800A;
|
||||
/* Configure PEx pins Output type to push-pull */
|
||||
GPIOE->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PEx pins */
|
||||
GPIOE->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PFx pins to FMC Alternate function */
|
||||
GPIOF->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOF->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PFx pins in Alternate function mode */
|
||||
GPIOF->MODER = 0xAA800AAA;
|
||||
/* Configure PFx pins speed to 50 MHz */
|
||||
GPIOF->OSPEEDR = 0xAA800AAA;
|
||||
/* Configure PFx pins Output type to push-pull */
|
||||
GPIOF->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PFx pins */
|
||||
GPIOF->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PGx pins to FMC Alternate function */
|
||||
GPIOG->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOG->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PGx pins in Alternate function mode */
|
||||
GPIOG->MODER = 0xAAAAAAAA;
|
||||
/* Configure PGx pins speed to 50 MHz */
|
||||
GPIOG->OSPEEDR = 0xAAAAAAAA;
|
||||
/* Configure PGx pins Output type to push-pull */
|
||||
GPIOG->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PGx pins */
|
||||
GPIOG->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PHx pins to FMC Alternate function */
|
||||
GPIOH->AFR[0] = 0x00C0CC00;
|
||||
GPIOH->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PHx pins in Alternate function mode */
|
||||
GPIOH->MODER = 0xAAAA08A0;
|
||||
/* Configure PHx pins speed to 50 MHz */
|
||||
GPIOH->OSPEEDR = 0xAAAA08A0;
|
||||
/* Configure PHx pins Output type to push-pull */
|
||||
GPIOH->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PHx pins */
|
||||
GPIOH->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PIx pins to FMC Alternate function */
|
||||
GPIOI->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOI->AFR[1] = 0x00000CC0;
|
||||
/* Configure PIx pins in Alternate function mode */
|
||||
GPIOI->MODER = 0x0028AAAA;
|
||||
/* Configure PIx pins speed to 50 MHz */
|
||||
GPIOI->OSPEEDR = 0x0028AAAA;
|
||||
/* Configure PIx pins Output type to push-pull */
|
||||
GPIOI->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PIx pins */
|
||||
GPIOI->PUPDR = 0x00000000;
|
||||
|
||||
/*-- FMC Configuration ------------------------------------------------------*/
|
||||
/* Enable the FMC interface clock */
|
||||
RCC->AHB3ENR |= 0x00000001;
|
||||
|
||||
/* Configure and enable SDRAM bank1 */
|
||||
FMC_Bank5_6->SDCR[0] = 0x000019E0;
|
||||
FMC_Bank5_6->SDTR[0] = 0x01115351;
|
||||
|
||||
/* SDRAM initialization sequence */
|
||||
/* Clock enable command */
|
||||
FMC_Bank5_6->SDCMR = 0x00000011;
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Delay */
|
||||
for (index = 0; index<1000; index++);
|
||||
|
||||
/* PALL command */
|
||||
FMC_Bank5_6->SDCMR = 0x00000012;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Auto refresh command */
|
||||
FMC_Bank5_6->SDCMR = 0x00000073;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* MRD register program */
|
||||
FMC_Bank5_6->SDCMR = 0x00046014;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Set refresh count */
|
||||
tmpreg = FMC_Bank5_6->SDRTR;
|
||||
FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
|
||||
|
||||
/* Disable write protection */
|
||||
tmpreg = FMC_Bank5_6->SDCR[0];
|
||||
FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
|
||||
#endif /* DATA_IN_ExtSDRAM */
|
||||
|
||||
#if defined(DATA_IN_ExtSRAM)
|
||||
/*-- GPIOs Configuration -----------------------------------------------------*/
|
||||
/* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
|
||||
RCC->AHB1ENR |= 0x00000078;
|
||||
|
||||
/* Connect PDx pins to FMC Alternate function */
|
||||
GPIOD->AFR[0] = 0x00CCC0CC;
|
||||
GPIOD->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOD->MODER = 0xAAAA0A8A;
|
||||
/* Configure PDx pins speed to 100 MHz */
|
||||
GPIOD->OSPEEDR = 0xFFFF0FCF;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOD->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOD->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PEx pins to FMC Alternate function */
|
||||
GPIOE->AFR[0] = 0xC00CC0CC;
|
||||
GPIOE->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PEx pins in Alternate function mode */
|
||||
GPIOE->MODER = 0xAAAA828A;
|
||||
/* Configure PEx pins speed to 100 MHz */
|
||||
GPIOE->OSPEEDR = 0xFFFFC3CF;
|
||||
/* Configure PEx pins Output type to push-pull */
|
||||
GPIOE->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PEx pins */
|
||||
GPIOE->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PFx pins to FMC Alternate function */
|
||||
GPIOF->AFR[0] = 0x00CCCCCC;
|
||||
GPIOF->AFR[1] = 0xCCCC0000;
|
||||
/* Configure PFx pins in Alternate function mode */
|
||||
GPIOF->MODER = 0xAA000AAA;
|
||||
/* Configure PFx pins speed to 100 MHz */
|
||||
GPIOF->OSPEEDR = 0xFF000FFF;
|
||||
/* Configure PFx pins Output type to push-pull */
|
||||
GPIOF->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PFx pins */
|
||||
GPIOF->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PGx pins to FMC Alternate function */
|
||||
GPIOG->AFR[0] = 0x00CCCCCC;
|
||||
GPIOG->AFR[1] = 0x000000C0;
|
||||
/* Configure PGx pins in Alternate function mode */
|
||||
GPIOG->MODER = 0x00085AAA;
|
||||
/* Configure PGx pins speed to 100 MHz */
|
||||
GPIOG->OSPEEDR = 0x000CAFFF;
|
||||
/* Configure PGx pins Output type to push-pull */
|
||||
GPIOG->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PGx pins */
|
||||
GPIOG->PUPDR = 0x00000000;
|
||||
|
||||
/*-- FMC/FSMC Configuration --------------------------------------------------*/
|
||||
/* Enable the FMC/FSMC interface clock */
|
||||
RCC->AHB3ENR |= 0x00000001;
|
||||
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FMC_Bank1->BTCR[2] = 0x00001011;
|
||||
FMC_Bank1->BTCR[3] = 0x00000201;
|
||||
FMC_Bank1E->BWTR[2] = 0x0fffffff;
|
||||
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
}
|
||||
#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
122
boards/base/STM32F746-Discovery/stm32f746g_raw32_ugfx.c
Normal file
122
boards/base/STM32F746-Discovery/stm32f746g_raw32_ugfx.c
Normal file
@ -0,0 +1,122 @@
|
||||
#include "gfx.h"
|
||||
#include "stm32f7xx_hal.h"
|
||||
|
||||
systemticks_t gfxSystemTicks(void)
|
||||
{
|
||||
return HAL_GetTick();
|
||||
}
|
||||
|
||||
systemticks_t gfxMillisecondsToTicks(delaytime_t ms)
|
||||
{
|
||||
return ms;
|
||||
}
|
||||
|
||||
static void SystemClock_Config(void);
|
||||
static void CPU_CACHE_Enable(void);
|
||||
static void LCD_Config(void);
|
||||
|
||||
void Raw32OSInit(void) {
|
||||
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct;
|
||||
|
||||
/* Enable the CPU Cache */
|
||||
CPU_CACHE_Enable();
|
||||
|
||||
/* STM32F7xx HAL library initialization:
|
||||
- Configure the Flash ART accelerator on ITCM interface
|
||||
- Configure the Systick to generate an interrupt each 1 msec
|
||||
- Set NVIC Group Priority to 4
|
||||
- Global MSP (MCU Support Package) initialization
|
||||
*/
|
||||
HAL_Init();
|
||||
|
||||
/* Configure the system clock to 216 MHz */
|
||||
SystemClock_Config();
|
||||
|
||||
// LED - for testing
|
||||
GPIO_InitTypeDef GPIO_InitStruct;
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_1;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
|
||||
__GPIOI_CLK_ENABLE();
|
||||
HAL_GPIO_Init(GPIOI, &GPIO_InitStruct);
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* The system Clock is configured as follow :
|
||||
* System Clock source = PLL (HSE)
|
||||
* SYSCLK(Hz) = 200000000 / 216000000
|
||||
* HCLK(Hz) = 200000000 / 216000000
|
||||
* AHB Prescaler = 1
|
||||
* APB1 Prescaler = 4
|
||||
* APB2 Prescaler = 2
|
||||
* HSE Frequency(Hz) = 25000000
|
||||
* PLL_M = 25
|
||||
* PLL_N = 400 / 432
|
||||
* PLL_P = 2
|
||||
* PLL_Q = 8 / 9
|
||||
* VDD(V) = 3.3
|
||||
* Main regulator output voltage = Scale1 mode
|
||||
* Flash Latency(WS) = 6 / 7
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct;
|
||||
HAL_StatusTypeDef ret = HAL_OK;
|
||||
|
||||
/* Enable HSE Oscillator and activate PLL with HSE as source */
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLM = 25;
|
||||
RCC_OscInitStruct.PLL.PLLN = 400; // 432
|
||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
||||
RCC_OscInitStruct.PLL.PLLQ = 8; // 9
|
||||
|
||||
ret = HAL_RCC_OscConfig(&RCC_OscInitStruct);
|
||||
if(ret != HAL_OK)
|
||||
{
|
||||
while(1) { ; }
|
||||
}
|
||||
|
||||
/* Activate the OverDrive to reach the 200/216 MHz Frequency */
|
||||
ret = HAL_PWREx_EnableOverDrive();
|
||||
if(ret != HAL_OK)
|
||||
{
|
||||
while(1) { ; }
|
||||
}
|
||||
|
||||
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
|
||||
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
|
||||
|
||||
ret = HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_6); // FLASH_LATENCY_7
|
||||
if(ret != HAL_OK)
|
||||
{
|
||||
while(1) { ; }
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief CPU L1-Cache enable.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void CPU_CACHE_Enable(void)
|
||||
{
|
||||
/* Enable I-Cache */
|
||||
SCB_EnableICache();
|
||||
|
||||
/* Enable D-Cache */
|
||||
SCB_EnableDCache();
|
||||
}
|
||||
|
||||
169
boards/base/STM32F746-Discovery/stm32f746nghx_flash.ld
Normal file
169
boards/base/STM32F746-Discovery/stm32f746nghx_flash.ld
Normal file
@ -0,0 +1,169 @@
|
||||
/*
|
||||
*****************************************************************************
|
||||
**
|
||||
|
||||
** File : LinkerScript.ld
|
||||
**
|
||||
** Abstract : Linker script for STM32F746NGHx Device with
|
||||
** 1024KByte FLASH, 320KByte RAM
|
||||
**
|
||||
** Set heap size, stack size and stack location according
|
||||
** to application requirements.
|
||||
**
|
||||
** Set memory bank area and size if external memory is used.
|
||||
**
|
||||
** Target : STMicroelectronics STM32
|
||||
**
|
||||
**
|
||||
** Distribution: The file is distributed as is, without any warranty
|
||||
** of any kind.
|
||||
**
|
||||
** (c)Copyright Ac6.
|
||||
** You may use this file as-is or modify it according to the needs of your
|
||||
** project. Distribution of this file (unmodified or modified) is not
|
||||
** permitted. Ac6 permit registered System Workbench for MCU users the
|
||||
** rights to distribute the assembled, compiled & linked contents of this
|
||||
** file as part of an application binary file, provided that it is built
|
||||
** using the System Workbench for MCU toolchain.
|
||||
**
|
||||
*****************************************************************************
|
||||
*/
|
||||
|
||||
/* Entry Point */
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
/* Highest address of the user mode stack */
|
||||
_estack = 0x2004FFFF; /* end of RAM */
|
||||
/* Generate a link error if heap and stack don't fit into RAM */
|
||||
_Min_Heap_Size = 0x200;; /* required amount of heap */
|
||||
_Min_Stack_Size = 0x400;; /* required amount of stack */
|
||||
|
||||
/* Specify the memory areas */
|
||||
MEMORY
|
||||
{
|
||||
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1024K
|
||||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 320K
|
||||
}
|
||||
|
||||
/* Define output sections */
|
||||
SECTIONS
|
||||
{
|
||||
/* The startup code goes first into FLASH */
|
||||
.isr_vector :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
KEEP(*(.isr_vector)) /* Startup code */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
/* The program code and other data goes into FLASH */
|
||||
.text :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.text) /* .text sections (code) */
|
||||
*(.text*) /* .text* sections (code) */
|
||||
*(.glue_7) /* glue arm to thumb code */
|
||||
*(.glue_7t) /* glue thumb to arm code */
|
||||
*(.eh_frame)
|
||||
|
||||
KEEP (*(.init))
|
||||
KEEP (*(.fini))
|
||||
|
||||
. = ALIGN(4);
|
||||
_etext = .; /* define a global symbols at end of code */
|
||||
} >FLASH
|
||||
|
||||
/* Constant data goes into FLASH */
|
||||
.rodata :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
|
||||
.ARM : {
|
||||
__exidx_start = .;
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = .;
|
||||
} >FLASH
|
||||
|
||||
.preinit_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP (*(.preinit_array*))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
} >FLASH
|
||||
.init_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP (*(SORT(.init_array.*)))
|
||||
KEEP (*(.init_array*))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
} >FLASH
|
||||
.fini_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP (*(SORT(.fini_array.*)))
|
||||
KEEP (*(.fini_array*))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
} >FLASH
|
||||
|
||||
/* used by the startup to initialize data */
|
||||
_sidata = LOADADDR(.data);
|
||||
|
||||
/* Initialized data sections goes into RAM, load LMA copy after code */
|
||||
.data :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sdata = .; /* create a global symbol at data start */
|
||||
*(.data) /* .data sections */
|
||||
*(.data*) /* .data* sections */
|
||||
|
||||
. = ALIGN(4);
|
||||
_edata = .; /* define a global symbol at data end */
|
||||
} >RAM AT> FLASH
|
||||
|
||||
|
||||
/* Uninitialized data section */
|
||||
. = ALIGN(4);
|
||||
.bss :
|
||||
{
|
||||
/* This is used by the startup in order to initialize the .bss secion */
|
||||
_sbss = .; /* define a global symbol at bss start */
|
||||
__bss_start__ = _sbss;
|
||||
*(.bss)
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
|
||||
. = ALIGN(4);
|
||||
_ebss = .; /* define a global symbol at bss end */
|
||||
__bss_end__ = _ebss;
|
||||
} >RAM
|
||||
|
||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||
._user_heap_stack :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
PROVIDE ( end = . );
|
||||
PROVIDE ( _end = . );
|
||||
. = . + _Min_Heap_Size;
|
||||
. = . + _Min_Stack_Size;
|
||||
. = ALIGN(4);
|
||||
} >RAM
|
||||
|
||||
|
||||
|
||||
/* Remove information from the standard libraries */
|
||||
/DISCARD/ :
|
||||
{
|
||||
libc.a ( * )
|
||||
libm.a ( * )
|
||||
libgcc.a ( * )
|
||||
}
|
||||
|
||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||
}
|
||||
|
||||
|
||||
@ -9,7 +9,7 @@
|
||||
#define _GDISP_LLD_BOARD_H
|
||||
|
||||
static const ltdcConfig driverCfg = {
|
||||
480, 270, // Width, Height (pixels)
|
||||
480, 272, // Width, Height (pixels)
|
||||
41, 10, // Horizontal, Vertical sync (pixels)
|
||||
13, 2, // Horizontal, Vertical back porch (pixels)
|
||||
32, 2, // Horizontal, Vertical front porch (pixels)
|
||||
@ -17,12 +17,12 @@ static const ltdcConfig driverCfg = {
|
||||
0x000000, // Clear color (RGB888)
|
||||
|
||||
{ // Background layer config
|
||||
(LLDCOLOR_TYPE *)SDRAM_BANK_ADDR, // Frame buffer address
|
||||
480, 270, // Width, Height (pixels)
|
||||
(LLDCOLOR_TYPE *)SDRAM_DEVICE_ADDR, // Frame buffer address
|
||||
480, 272, // Width, Height (pixels)
|
||||
480 * LTDC_PIXELBYTES, // Line pitch (bytes)
|
||||
LTDC_PIXELFORMAT, // Pixel format
|
||||
0, 0, // Start pixel position (x, y)
|
||||
480, 270, // Size of virtual layer (cx, cy)
|
||||
480, 272, // Size of virtual layer (cx, cy)
|
||||
LTDC_COLOR_FUCHSIA, // Default color (ARGB8888)
|
||||
0x980088, // Color key (RGB888)
|
||||
LTDC_BLEND_FIX1_FIX2, // Blending factors
|
||||
|
||||
@ -196,34 +196,33 @@ builddirs:
|
||||
|
||||
$(FAKEFILE):
|
||||
ifneq ($(OPT_VERBOSE_COMPILE),yes)
|
||||
@echo
|
||||
ifneq ($(filter %.cpp,$(SRC) $(SRC_NOTHUMB) $(SRC_THUMB)),)
|
||||
@echo
|
||||
@echo .
|
||||
@echo C++ Compiler Options..
|
||||
@echo $(XCXX) -c $(CPPFLAGS) $(CXXFLAGS) $(SRCFLAGS) $(@:.o=.cpp) -o $(OBJDIR)/$@
|
||||
else
|
||||
ifneq ($(filter %.c++,$(SRC) $(SRC_NOTHUMB) $(SRC_THUMB)),)
|
||||
@echo
|
||||
@echo .
|
||||
@echo C++ Compiler Options..
|
||||
@echo $(XCXX) -c $(CPPFLAGS) $(CXXFLAGS) $(SRCFLAGS) $(@:.o=.c++) -o $(OBJDIR)/$@
|
||||
endif
|
||||
endif
|
||||
ifneq ($(filter %.c,$(SRC) $(SRC_NOTHUMB) $(SRC_THUMB)),)
|
||||
@echo
|
||||
@echo .
|
||||
@echo C Compiler Options....
|
||||
@echo $(XCC) -c $(CPPFLAGS) $(CFLAGS) $(SRCFLAGS) $(@:.o=.c) -o $(OBJDIR)/$@
|
||||
endif
|
||||
ifneq ($(filter %.s,$(SRC) $(SRC_NOTHUMB) $(SRC_THUMB)),)
|
||||
@echo
|
||||
@echo .
|
||||
@echo Assembler Options.....
|
||||
@echo $(XCC) -c $(CPPFLAGS) $(CFLAGS) $(SRCFLAGS) $(@:.o=.s) -o $(OBJDIR)/$@
|
||||
endif
|
||||
ifneq ($(OPT_MAKE_LIB),yes)
|
||||
@echo
|
||||
@echo .
|
||||
@echo Linker Options........
|
||||
@echo $(XLD) $(LDFLAGS) $(OBJDIR)/$@ -o $(EXEFILE)
|
||||
endif
|
||||
@echo
|
||||
@echo .
|
||||
endif
|
||||
|
||||
fakethumbfile.o $(OBJS_THUMB): SRCFLAGS += -mthumb -DTHUMB
|
||||
|
||||
Loading…
Reference in New Issue
Block a user