uGFX
/
ugfx
2
0
Fork 0
Code Issues 2 Pull Requests Projects Releases Wiki Activity

Updating SSD1963 driver

ugfx_release_2.6
Joel Bodenmann 2014-08-08 14:18:07 +02:00
parent 052a8e033c
commit 6ff7d90500
3 changed files with 124 additions and 34 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

147
drivers/gdisp/SSD1963/gdisp_lld_SSD1963.c
View File

@ -16,6 +16,7 @@
#define CALC_PERIOD(w,b,f,p) (p+b+w+f)
#define CALC_FPR(w,h,hb,hf,hp,vb,vf,vp,fps) ((fps * CALC_PERIOD(w,hb,hf,hp) * CALC_PERIOD(h,vb,vf,vp) * 1048576)/100000000)
typedef struct LCD_Parameters {
coord_t width, height; // Panel width and height
uint16_t hbporch; // Horizontal Back Porch
@ -27,6 +28,26 @@ typedef struct LCD_Parameters {
uint16_t vpulse; // Vertical Pulse
uint16_t vperiod; // Vertical Period (Total)
uint32_t fpr; // Calculated FPR
uint16_t flags; // For command "SSD1963_SET_GDISP_MODE"
/* Set the pannel data width */
#define LCD_PANEL_DATA_WIDTH_24BIT (1<<5) // 18bit default
/* Set the color deeph enhancement */
#define LCD_PANEL_ENABLE_FRC ((1<<3) | (1<<4))
#define LCD_PANEL_ENABLE_DITHERING (1<<4) // no enhancement default
/* Set the dot clock pulse polarity */
#define LCD_PANEL_LSHIFT_FALLING_EDGE (1<<2) // default rising edge
/* Set the horizontal sync pulse polarity */
#define LCD_PANEL_LLINE_ACTIVE_HIGH (1<<1) // default active low
/* Set the vertical sync pulse polarity */
#define LCD_PANEL_LFRAME_ACTIVE_HIGH (1<0) // default active low
/* Set the lcd panel mode */
#define LCD_PANEL_MODE_TTL ((1<<7) << 8) // default mode is Hsync+Vsync +DE
/* Set the lcd panel interface type */ // default TFT mode
#define LCD_PANEL_TYPE_SERIAL_RGB_MODE ((1<<6) << 8) // Serial RGB mode
#define LCD_PANEL_TYPE_SERIAL_RGB_DUMMY_MODE (((1<<5) | (1<<6)) << 8) // Serial RGB+dummy mode
} LCD_Parameters;
#include "board_SSD1963.h"
@ -48,17 +69,55 @@ typedef struct LCD_Parameters {
#include "drivers/gdisp/SSD1963/ssd1963.h"
#define dummy_read(g) { volatile uint16_t dummy; dummy = read_data(g); (void) dummy; }
#define write_reg(g, reg, data) { write_index(g, reg); write_data(g, data); }
#define write_data16(g, data) { write_data(g, (data)>>8); write_data(g, (data) & 0xFF); }
static inline void set_viewport(GDisplay* g) {
write_index(g, SSD1963_SET_PAGE_ADDRESS);
write_data16(g, g->p.y);
write_data16(g, g->p.y+g->p.cy-1);
write_index(g, SSD1963_SET_COLUMN_ADDRESS);
write_data16(g, g->p.x);
write_data16(g, g->p.x+g->p.cx-1);
write_index(g, SSD1963_WRITE_MEMORY_START);
switch(g->g.Orientation) {
default:
case GDISP_ROTATE_0:
write_index(g, SSD1963_SET_COLUMN_ADDRESS);
write_data16(g, g->p.x);
write_data16(g, g->p.x+g->p.cx-1);
write_index(g, SSD1963_SET_PAGE_ADDRESS);
write_data16(g, g->p.y);
write_data16(g, g->p.y+g->p.cy-1);
write_index(g, SSD1963_WRITE_MEMORY_START);
break;
case GDISP_ROTATE_90:
write_index(g, SSD1963_SET_COLUMN_ADDRESS);
write_data16(g, g->p.y);
write_data16(g, g->p.y+g->p.cy-1);
write_index(g, SSD1963_SET_PAGE_ADDRESS);
write_data16(g, GDISP_SCREEN_HEIGHT-1 - (g->p.x+g->p.cx-1) );
write_data16(g, GDISP_SCREEN_HEIGHT-1 - (g->p.x));
write_index(g, SSD1963_WRITE_MEMORY_START);
break;
case GDISP_ROTATE_180:
write_index(g, SSD1963_SET_COLUMN_ADDRESS);
write_data16(g, GDISP_SCREEN_WIDTH-1 - (g->p.x+g->p.cx-1));
write_data16(g, GDISP_SCREEN_WIDTH-1 - (g->p.x));
write_index(g, SSD1963_SET_PAGE_ADDRESS);
write_data16(g, GDISP_SCREEN_HEIGHT-1 - (g->p.y+g->p.cy-1));
write_data16(g, GDISP_SCREEN_HEIGHT-1 - (g->p.y));
write_index(g, SSD1963_WRITE_MEMORY_START);
break;
case GDISP_ROTATE_270:
write_index(g, SSD1963_SET_COLUMN_ADDRESS);
write_data16(g, GDISP_SCREEN_WIDTH-1 - (g->p.y+g->p.cy-1));
write_data16(g, GDISP_SCREEN_WIDTH-1 - (g->p.y));
write_index(g, SSD1963_SET_PAGE_ADDRESS);
write_data16(g, g->p.x);
write_data16(g, g->p.x+g->p.cx-1);
write_index(g, SSD1963_WRITE_MEMORY_START);
break;
}
}
/**
@ -71,12 +130,18 @@ static inline void set_backlight(GDisplay *g, uint8_t percent) {
//Check your LCD's hardware, the PWM connection is default left open and instead
//connected to a LED connection on the breakout board
write_index(g, SSD1963_SET_PWM_CONF); //set PWM for BackLight
write_data(g, 0x01);
write_data(g, (55+percent*2) & 0x00FF);
write_data(g, 0x01); //controlled by host (not DBC), enabled
write_data(g, 0xFF);
write_data(g, 0x60); //don't let it go too dark, avoid a useless LCD
write_data(g, 0x0F); //prescaler ???
write_data(g, 4); // PWMF[7:0] = 4,
// PWM signal frequency = PLL clock / (256 * (PWMF[7:0] + 1)) / 256
// = aprox 366Hz for a PLL freq = 120MHz
if ( percent==0xFF ) // use percent==0xFF to turn off SSD1963 pwm in power SLEEP or DEEP SLEEP mode
write_data(g, 0x00);
else
write_data(g, (55+percent*2) & 0x00FF);
write_data(g, 0x01); // controlled by host (not DBC), enabled
write_data(g, 0x00); // DBC manual brightness; Set the brightness level: 00 Dimmest, FF Brightest
write_data(g, 0x00); // DBC minimum brightness; Set the minimum brightness level: 00 Dimmest, FF Brightest
write_data(g, 0x00); // Brightness prescaler of Transition Effect; Set the brightness prescaler: 0 Dimmest, F Brightest
}
/*===========================================================================*/
@ -121,10 +186,10 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
write_index(g, SSD1963_SOFT_RESET);
gfxSleepMilliseconds(5);
/* Screen size */
/* LCD panel parameters */
write_index(g, SSD1963_SET_GDISP_MODE);
write_data(g, 0x18); //Enabled dithering
write_data(g, 0x00);
write_data(g, lcdp->flags & 0xFF);
write_data(g, (lcdp->flags >> 8) & 0xFF);
write_data16(g, lcdp->width-1);
write_data16(g, lcdp->height-1);
write_data(g, 0x00); // RGB
@ -155,9 +220,10 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
/* Tear effect indicator ON. This is used to tell the host MCU when the driver is not refreshing the panel (during front/back porch) */
write_reg(g, SSD1963_SET_TEAR_ON, 0x00);
/* Turn on */
write_index(g, SSD1963_SET_DISPLAY_ON);
/* Turn on the back-light */
set_backlight(g, GDISP_INITIAL_BACKLIGHT);
@ -190,8 +256,7 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
}
#endif
// Not implemented yet.
#if 0 && GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
LLDSPEC void gdisp_lld_control(GDisplay *g) {
switch(g->p.x) {
case GDISP_CONTROL_POWER:
@ -200,23 +265,34 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
switch((powermode_t)g->p.ptr) {
case powerOff:
acquire_bus(g);
write_index(g, SSD1963_EXIT_SLEEP_MODE); // leave sleep mode
gfxSleepMilliseconds(5);
write_index(g, SSD1963_SET_DISPLAY_OFF);
write_index(g, SSD1963_SET_DEEP_SLEEP); // enter deep sleep mode
release_bus(g);
break;
case powerOn:
acquire_bus(g);
read_reg(0x0000); gfxSleepMilliseconds(5); // 2x Dummy reads to wake up from deep sleep
read_reg(0x0000); gfxSleepMilliseconds(5);
write_index(g, SSD1963_SET_DISPLAY_ON);
dummy_read(g);
dummy_read(g);
/* Wait for 1msec to let the PLL stable if was stopped by deep sleep mode */
gfxSleepMilliseconds(100);
write_index(g, SSD1963_EXIT_SLEEP_MODE);
gfxSleepMilliseconds(5);
/* Restore the back-light */
set_backlight(g, gdispGGetBacklight(g));
release_bus(g);
break;
case powerSleep:
acquire_bus(g);
write_index(g, SSD1963_SET_DISPLAY_OFF);
write_index(g, SSD1963_ENTER_SLEEP_MODE); // enter sleep mode
/* Turn off the back-light pwm from SSD1963 */
set_backlight(g, 0xFF);
write_index(g, SSD1963_ENTER_SLEEP_MODE);
gfxSleepMilliseconds(5);
release_bus(g);
break;
case powerDeepSleep:
acquire_bus(g);
/* Turn off the back-light pwm from SSD1963 */
set_backlight(g, 0xFF);
write_index(g, SSD1963_ENTER_SLEEP_MODE);
write_index(g, SSD1963_SET_DEEP_SLEEP);
release_bus(g);
break;
default:
@ -228,30 +304,35 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
case GDISP_CONTROL_ORIENTATION:
if (g->g.Orientation == (orientation_t)g->p.ptr)
return;
switch((orientation_t)g->p.ptr) {
case GDISP_ROTATE_0:
acquire_bus(g);
/* Code here */
write_index(g, SSD1963_SET_ADDRESS_MODE);
write_data(g, 0x00);
release_bus(g);
g->g.Height = ((LCD_Parameters *)g->priv)->height;
g->g.Width = ((LCD_Parameters *)g->priv)->width;
break;
case GDISP_ROTATE_90:
acquire_bus(g);
/* Code here */
write_index(g, SSD1963_SET_ADDRESS_MODE);
write_data(g, SSD1963_ADDR_MODE_PAGE_ADDR_ORDER | SSD1963_ADDR_MODE_PAG_COL_ADDR_ORDER );
release_bus(g);
g->g.Height = ((LCD_Parameters *)g->priv)->width;
g->g.Width = ((LCD_Parameters *)g->priv)->height;
break;
case GDISP_ROTATE_180:
acquire_bus(g);
/* Code here */
write_index(g, SSD1963_SET_ADDRESS_MODE);
write_data(g, SSD1963_ADDR_MODE_PAGE_ADDR_ORDER | SSD1963_ADDR_MODE_COL_ADDR_ORDER);
release_bus(g);
g->g.Height = ((LCD_Parameters *)g->priv)->height;
g->g.Width = ((LCD_Parameters *)g->priv)->width;
break;
case GDISP_ROTATE_270:
acquire_bus(g);
/* Code here */
write_index(g, SSD1963_SET_ADDRESS_MODE);
write_data(g, SSD1963_ADDR_MODE_COL_ADDR_ORDER | SSD1963_ADDR_MODE_PAG_COL_ADDR_ORDER );
release_bus(g);
g->g.Height = ((LCD_Parameters *)g->priv)->width;
g->g.Width = ((LCD_Parameters *)g->priv)->height;
@ -259,7 +340,7 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
default:
return;
}
g->g.Orientation = (orientation_t)g->p.ptr;
g->g.Orientation = (orientation_t)g->p.ptr;
return;
case GDISP_CONTROL_BACKLIGHT:

2
drivers/gdisp/SSD1963/gdisp_lld_config.h
View File

@ -15,7 +15,7 @@
/*===========================================================================*/
#define GDISP_HARDWARE_STREAM_WRITE TRUE
//#define GDISP_HARDWARE_CONTROL TRUE // Not Yet.
#define GDISP_HARDWARE_CONTROL TRUE
#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_RGB565

9
drivers/gdisp/SSD1963/ssd1963.h
View File

@ -93,4 +93,13 @@
#define SSD1963_PDI_9BIT 6
#define SSD1963_GET_PIXEL_DATA_INTERFACE 0x00F1
#define SSD1963_ADDR_MODE_FLIP_VERT (1 << 0)
#define SSD1963_ADDR_MODE_FLIP_HORZ (1 << 1)
#define SSD1963_ADDR_MODE_LATCH_RIGHT_TO_LEFT (1 << 2)
#define SSD1963_ADDR_MODE_BGR (1 << 3)
#define SSD1963_ADDR_MODE_REFRESH_BOTTOM_UP (1 << 4)
#define SSD1963_ADDR_MODE_PAG_COL_ADDR_ORDER (1 << 5)
#define SSD1963_ADDR_MODE_COL_ADDR_ORDER (1 << 6)
#define SSD1963_ADDR_MODE_PAGE_ADDR_ORDER (1 << 7)
#endif