uGFX/ugfx
2
0
Fork 0
Code Issues 2 Pull Requests Projects Releases Wiki Activity

New sample board file (replacing some misleading existing ones)

Browse Source
This commit is contained in:
Joel Bodenmann 2016-02-10 23:28:50 +01:00
parent 205d3cf97b
commit 87412e87d6
3 changed files with 93 additions and 251 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

93
boards/addons/gdisp/board_SSD1306_chibios_16.1.3_stm32f4.h Normal file
View File

@ -0,0 +1,93 @@
#ifndef _GDISP_LLD_BOARD_H
#define _GDISP_LLD_BOARD_H
// Pin & SPI setup
#define SPI_DRIVER (&SPID2)
#define SPI_PORT GPIOB
#define SCK_PAD 10
#define MOSI_PAD 15
#define CS_PORT GPIOB
#define RESET_PORT GPIOB
#define DC_PORT GPIOB
#define CS_PAD 3 // 0 = chip selected
#define RESET_PAD 4 // 0 = reset
#define DC_PAD 5 // control = 0, data = 1
static SPIConfig spi_cfg = {
NULL,
CS_PORT,
CS_PAD,
SPI_CR1_BR_1
};
static GFXINLINE void init_board(GDisplay* g)
{
(void)g;
g->board = 0;
// Set pin modes
palSetPadMode(SPI_PORT, SCK_PAD, PAL_MODE_ALTERNATE(5) | PAL_STM32_OSPEED_HIGHEST);
palSetPadMode(SPI_PORT, MOSI_PAD, PAL_MODE_ALTERNATE(5) | PAL_STM32_OSPEED_HIGHEST);
palSetPadMode(RESET_PORT, RESET_PAD, PAL_MODE_OUTPUT_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
palSetPadMode(CS_PORT, CS_PAD, PAL_MODE_OUTPUT_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
palSetPadMode(DC_PORT, DC_PAD, PAL_MODE_OUTPUT_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
// Apply default states
palSetPad(CS_PORT, CS_PAD);
palSetPad(RESET_PORT, RESET_PAD);
palClearPad(DC_PORT, DC_PAD);
// Start the SPI driver
spiStart(SPI_DRIVER, &spi_cfg);
}
static GFXINLINE void post_init_board(GDisplay* g)
{
(void)g;
}
static GFXINLINE void setpin_reset(GDisplay* g, bool_t state)
{
(void)g;
palWritePad(RESET_PORT, RESET_PAD, !state);
}
static GFXINLINE void acquire_bus(GDisplay* g)
{
(void)g;
spiAcquireBus(SPI_DRIVER);
spiSelect(SPI_DRIVER);
}
static GFXINLINE void release_bus(GDisplay* g)
{
(void)g;
spiUnselect(SPI_DRIVER);
spiReleaseBus(SPI_DRIVER);
}
static GFXINLINE void write_cmd(GDisplay* g, uint8_t cmd)
{
(void)g;
static uint8_t buf;
palClearPad(DC_PORT, DC_PAD);
buf = cmd;
spiSend(SPI_DRIVER, 1, &buf);
}
static GFXINLINE void write_data(GDisplay* g, uint8_t* data, uint16_t length)
{
(void)g;
palSetPad(DC_PORT, DC_PAD);
spiSend(SPI_DRIVER, length, data);
}
#endif /* _GDISP_LLD_BOARD_H */

136
boards/addons/gdisp/board_SSD1306_spi.h
View File

@ -1,136 +0,0 @@
/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.org/license.html
*/
/**
* @file boards/addons/gdisp/board_SSD1306_spi.h
* @brief GDISP Graphic Driver subsystem board interface for the SSD1306 display.
*
* @note This file contains a mix of hardware specific and operating system specific
* code. You will need to change it for your CPU and/or operating system.
*/
#ifndef _GDISP_LLD_BOARD_H
#define _GDISP_LLD_BOARD_H
// The command byte to put on the front of each page line
#define SSD1306_PAGE_PREFIX 0x40 // Co = 0, D/C = 1
// For a multiple display configuration we would put all this in a structure and then
// set g->board to that structure.
#define SSD1306_RESET_PORT GPIOB
#define SSD1306_RESET_PIN 5
#define SSD1306_MISO_PORT GPIOB
#define SSD1306_MISO_PIN 8
#define SSD1306_MOSI_PORT GPIOB
#define SSD1306_MOSI_PIN 7
#define SSD1306_SCK_PORT GPIOB
#define SSD1306_SCK_PIN 6
#define SSD1306_CS_PORT GPIOB
#define SSD1306_CS_PIN 5
#define SET_RST palSetPad(SSD1306_RESET_PORT, SSD1306_RESET_PIN);
#define CLR_RST palClearPad(SSD1306_RESET_PORT, SSD1306_RESET_PIN);
/*
* SPI1 configuration structure.
* Speed 42MHz, CPHA=0, CPOL=0, 8bits frames, MSb transmitted first.
* The slave select line is the pin 4 on the port GPIOA.
*/
static const SPIConfig spi1config = {
0,
/* HW dependent part.*/
SSD1306_MISO_PORT,
SSD1306_MISO_PIN,
0
//SPI_CR1_BR_0
};
#if GFX_USE_OS_CHIBIOS
static int32_t thdPriority = 0;
#endif
static GFXINLINE void init_board(GDisplay *g) {
unsigned i;
// As we are not using multiple displays we set g->board to NULL as we don't use it.
g->board = 0;
switch(g->controllerdisplay) {
case 0: // Set up for Display 0
// RESET pin.
palSetPadMode(SSD1306_RESET_PORT, SSD1306_RESET_PIN, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(SSD1306_MISO_PORT, SSD1306_MISO_PIN, PAL_MODE_ALTERNATE(1)|
PAL_STM32_OSPEED_HIGHEST);
palSetPadMode(SSD1306_MOSI_PORT, SSD1306_MOSI_PIN, PAL_MODE_ALTERNATE(1)|
PAL_STM32_OSPEED_HIGHEST);
palSetPadMode(SSD1306_SCK_PORT, SSD1306_SCK_PIN, PAL_MODE_ALTERNATE(1)|
PAL_STM32_OSPEED_HIGHEST);
palSetPad(SSD1306_CS_PORT, SSD1306_CS_PIN);
palSetPadMode(SSD1306_CS_PORT, SSD1306_CS_PIN, PAL_MODE_ALTERNATE(1)|
PAL_STM32_OSPEED_HIGHEST);
spiInit();
break;
}
}
static GFXINLINE void post_init_board(GDisplay *g) {
(void) g;
}
static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
(void) g;
if(state)
CLR_RST
else
SET_RST
}
static GFXINLINE void acquire_bus(GDisplay *g) {
(void) g;
#if GFX_USE_OS_CHIBIOS
thdPriority = (int32_t)chThdGetPriority();
chThdSetPriority(HIGHPRIO);
#endif
spiAcquireBus(&SPID1);
}
static GFXINLINE void release_bus(GDisplay *g) {
(void) g;
#if GFX_USE_OS_CHIBIOS
chThdSetPriority(thdPriority);
#endif
spiReleaseBus(&SPID1);
}
static GFXINLINE void write_cmd(GDisplay *g, uint8_t cmd) {
uint8_t command[2];
(void) g;
command[0] = 0x00; // Co = 0, D/C = 0
command[1] = cmd;
spiStart(&SPID1, &spi1config);
spiSelect(&SPID1);
spiStartSend(&SPID1, 2, command);
spiUnselect(&SPID1);
spiStop(&SPID1);
}
static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
(void) g;
spiStart(&SPID1, &spi1config);
spiSelect(&SPID1);
spiStartSend(&SPID1, length, data);
spiUnselect(&SPID1);
spiStop(&SPID1);
}
#endif /* _GDISP_LLD_BOARD_H */

115
boards/addons/gdisp/board_SSD1306_spi2.h
View File

@ -1,115 +0,0 @@
/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.org/license.html
*/
/**
* @file boards/addons/gdisp/board_SSD1306_spi.h
* @brief GDISP Graphic Driver subsystem board interface for the SSD1306 display.
*
* @note This file contains a mix of hardware specific and operating system specific
* code. You will need to change it for your CPU and/or operating system.
*/
#ifndef _GDISP_LLD_BOARD_H
#define _GDISP_LLD_BOARD_H
// Pin & SPI setup
#define SPI_DRIVER (&SPID2)
#define SPI_PORT GPIOB
#define SCK_PAD 13
#define MISO_PAD 14
#define MOSI_PAD 15
#define CS_PORT GPIOC
#define RESET_PORT GPIOC
#define DNC_PORT GPIOC
#define CS_PAD 7 // 0 = chip selected
#define RESET_PAD 8 // 0 = reset
#define DNC_PAD 9 // control=0, data=1
static SPIConfig spi_cfg = { NULL, CS_PORT, CS_PAD, 0 };
static GFXINLINE void init_board(GDisplay *g) {
(void) g;
g->board = 0;
// Maximum speed of SSD1306 is 10Mhz, so set SPI speed less or = to that.
//
// STM32 specific setup
// STM32_PCLK1 is APB1 frequence in hertz.
// STM32_PCLK2 is APB2 frequence in hertz.
// See manual clock diagram to determine APB1 or APB2 for spi in use.
// SPI2 uses APB1 clock on stm32151
// BR bits divide PCLK as follows
// 000 /2 = 16 MHz
// 001 /4 = 8 MHz
// 010 /8 = 4 MHz
// 011 /16 = 2 MHz
// 100 /32 = 1 MHz
// 101 /64 = 500 kHz
// 110 /128 = 250 kHz
// 111 /256 = 125 kHz
unsigned long spi_clk = STM32_PCLK1 / 2;
unsigned code = 0;
while (spi_clk > 10000000) {
code++;
spi_clk /= 2;
}
spi_cfg.cr1 |= (code << 3);
if (g->controllerdisplay == 0) {
palSetPadMode(SPI_PORT, SCK_PAD, PAL_MODE_ALTERNATE(5)|PAL_STM32_OTYPE_PUSHPULL|PAL_STM32_OSPEED_MID2);
palSetPadMode(SPI_PORT, MOSI_PAD, PAL_MODE_ALTERNATE(5)|PAL_STM32_OTYPE_PUSHPULL|PAL_STM32_OSPEED_MID2);
palSetPadMode(SPI_PORT, MISO_PAD, PAL_MODE_ALTERNATE(5));
palSetPadMode(RESET_PORT, RESET_PAD, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(CS_PORT, CS_PAD, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(DNC_PORT, DNC_PAD, PAL_MODE_OUTPUT_PUSHPULL);
palSetPad(CS_PORT, CS_PAD);
palSetPad(RESET_PORT, RESET_PAD);
palClearPad(DNC_PORT, DNC_PAD);
}
}
static GFXINLINE void post_init_board(GDisplay *g) {
(void) g;
}
static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
(void) g;
palWritePad(RESET_PORT, RESET_PAD, !state);
}
static GFXINLINE void acquire_bus(GDisplay *g) {
(void) g;
spiAcquireBus(SPI_DRIVER);
spiStart(SPI_DRIVER, &spi_cfg);
spiSelect(SPI_DRIVER);
}
static GFXINLINE void release_bus(GDisplay *g) {
(void) g;
spiUnselect(SPI_DRIVER);
spiStop(SPI_DRIVER);
spiReleaseBus(SPI_DRIVER);
}
static GFXINLINE void write_cmd(GDisplay *g, uint8_t cmd) {
(void) g;
static uint8_t buf;
palClearPad(DNC_PORT, DNC_PAD);
buf = cmd;
spiSend(SPI_DRIVER, 1, &buf);
}
static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
(void) g;
palSetPad(DNC_PORT, DNC_PAD);
spiSend(SPI_DRIVER, length, data);
}
#endif /* _GDISP_LLD_BOARD_H */