From 8f31c5e632df70b6b0a4871680be0c436993a41c Mon Sep 17 00:00:00 2001 From: Joel Bodenmann Date: Sat, 10 Nov 2012 00:07:37 +0100 Subject: [PATCH] untracked template files since out of date --- templates/gdispXXX/gdisp_lld.c | 561 -------------------- templates/gdispXXX/gdisp_lld.mk | 5 - templates/gdispXXX/gdisp_lld_config.h | 70 --- templates/gdispXXX/readme.txt | 35 -- templates/readme.txt | 9 - templates/touchpadXXX/touchpad_lld.c | 149 ------ templates/touchpadXXX/touchpad_lld.mk | 6 - templates/touchpadXXX/touchpad_lld_config.h | 45 -- 8 files changed, 880 deletions(-) delete mode 100644 templates/gdispXXX/gdisp_lld.c delete mode 100644 templates/gdispXXX/gdisp_lld.mk delete mode 100644 templates/gdispXXX/gdisp_lld_config.h delete mode 100644 templates/gdispXXX/readme.txt delete mode 100644 templates/readme.txt delete mode 100644 templates/touchpadXXX/touchpad_lld.c delete mode 100644 templates/touchpadXXX/touchpad_lld.mk delete mode 100644 templates/touchpadXXX/touchpad_lld_config.h diff --git a/templates/gdispXXX/gdisp_lld.c b/templates/gdispXXX/gdisp_lld.c deleted file mode 100644 index 1b88a338..00000000 --- a/templates/gdispXXX/gdisp_lld.c +++ /dev/null @@ -1,561 +0,0 @@ -/* - ChibiOS/GFX - Copyright (C) 2012 - Joel Bodenmann aka Tectu - - This file is part of ChibiOS/GFX. - - ChibiOS/GFX is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/GFX is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/** - * @file templates/gdispXXX/gdisp_lld.c - * @brief GDISP Graphics Driver subsystem low level driver source template. - * - * @addtogroup GDISP - * @{ - */ - -#include "ch.h" -#include "hal.h" -#include "gdisp.h" - -#if GFX_USE_GDISP /*|| defined(__DOXYGEN__)*/ - -/* Include the emulation code for things we don't support */ -#include "gdisp_emulation.c" - -#if GDISP_NEED_TEXT && GDISP_HARDWARE_TEXT - #include "gdisp_fonts.h" -#endif - -/* All the board specific code should go in these include file so the driver - * can be ported to another board just by creating a suitable file. - */ -#if defined(BOARD_YOURBOARDNAME) - #include "gdisp_lld_board_yourboardname.h" -#else - /* Include the user supplied board definitions */ - #include "gdisp_lld_board.h" -#endif - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/* ---- Required Routines ---- */ -/* - The following 2 routines are required. - All other routines are optional. -*/ - -/** - * @brief Low level GDISP driver initialisation. - * @return TRUE if successful, FALSE on error. - * - * @notapi - */ -bool_t GDISP_LLD(init)(void) { - /* Initialise your display */ - - /* Initialise the GDISP structure to match */ - GDISP.Width = GDISP_SCREEN_WIDTH; - GDISP.Height = GDISP_SCREEN_HEIGHT; - GDISP.Orientation = GDISP_ROTATE_0; - GDISP.Powermode = powerOn; - GDISP.Backlight = 100; - GDISP.Contrast = 50; - #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP - GDISP.clipx0 = 0; - GDISP.clipy0 = 0; - GDISP.clipx1 = GDISP.Width; - GDISP.clipy1 = GDISP.Height; - #endif - return TRUE; -} - -/** - * @brief Draws a pixel on the display. - * - * @param[in] x X location of the pixel - * @param[in] y Y location of the pixel - * @param[in] color The color of the pixel - * - * @notapi - */ -void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) { - #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP - if (x < GDISP.clipx0 || y < GDISP.clipy0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return; - #endif - /* Code here */ -} - -/* ---- Optional Routines ---- */ -/* - All the below routines are optional. - Defining them will increase speed but everything - will work if they are not defined. - If you are not using a routine - turn it off using - the appropriate GDISP_HARDWARE_XXXX macro. - Don't bother coding for obvious similar routines if - there is no performance penalty as the emulation software - makes a good job of using similar routines. - eg. If fillarea() is defined there is little - point in defining clear() unless the - performance bonus is significant. - For good performance it is suggested to implement - fillarea() and blitarea(). -*/ - -#if GDISP_HARDWARE_CLEARS || defined(__DOXYGEN__) - /** - * @brief Clear the display. - * @note Optional - The high level driver can emulate using software. - * - * @param[in] color The color of the pixel - * - * @notapi - */ - void GDISP_LLD(clear)(color_t color) { - /* Code here */ - } -#endif - -#if GDISP_HARDWARE_LINES || defined(__DOXYGEN__) - /** - * @brief Draw a line. - * @note Optional - The high level driver can emulate using software. - * - * @param[in] x0, y0 The start of the line - * @param[in] x1, y1 The end of the line - * @param[in] color The color of the line - * - * @notapi - */ - void GDISP_LLD(drawline)(coord_t x0, coord_t y0, coord_t x1, coord_t y1, color_t color) { - #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP - /* Code here */ - #endif - /* Code here */ - } -#endif - -#if GDISP_HARDWARE_FILLS || defined(__DOXYGEN__) - /** - * @brief Fill an area with a color. - * @note Optional - The high level driver can emulate using software. - * - * @param[in] x, y The start filled area - * @param[in] cx, cy The width and height to be filled - * @param[in] color The color of the fill - * - * @notapi - */ - void GDISP_LLD(fillarea)(coord_t x, coord_t y, coord_t cx, coord_t cy, color_t color) { - #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP - if (x < GDISP.clipx0) { cx -= GDISP.clipx0 - x; x = GDISP.clipx0; } - if (y < GDISP.clipy0) { cy -= GDISP.clipy0 - y; y = GDISP.clipy0; } - if (cx <= 0 || cy <= 0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return; - if (x+cx > GDISP.clipx1) cx = GDISP.clipx1 - x; - if (y+cy > GDISP.clipy1) cy = GDISP.clipy1 - y; - #endif - /* Code here */ - } -#endif - -#if GDISP_HARDWARE_BITFILLS || defined(__DOXYGEN__) - /** - * @brief Fill an area with a bitmap. - * @note Optional - The high level driver can emulate using software. - * - * @param[in] x, y The start filled area - * @param[in] cx, cy The width and height to be filled - * @param[in] srcx, srcy The bitmap position to start the fill from - * @param[in] srccx The width of a line in the bitmap. - * @param[in] buffer The pixels to use to fill the area. - * - * @notapi - */ - void GDISP_LLD(blitareaex)(coord_t x, coord_t y, coord_t cx, coord_t cy, coord_t srcx, coord_t srcy, coord_t srccx, const pixel_t *buffer) { - #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP - if (x < GDISP.clipx0) { cx -= GDISP.clipx0 - x; srcx += GDISP.clipx0 - x; x = GDISP.clipx0; } - if (y < GDISP.clipy0) { cy -= GDISP.clipy0 - y; srcy += GDISP.clipy0 - y; y = GDISP.clipy0; } - if (srcx+cx > srccx) cx = srccx - srcx; - if (cx <= 0 || cy <= 0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return; - if (x+cx > GDISP.clipx1) cx = GDISP.clipx1 - x; - if (y+cy > GDISP.clipy1) cy = GDISP.clipy1 - y; - #endif - /* Code here */ - } -#endif - -/* Circular Drawing Functions */ -#if (GDISP_NEED_CIRCLE && GDISP_HARDWARE_CIRCLES) || defined(__DOXYGEN__) - /** - * @brief Draw a circle. - * @note Optional - The high level driver can emulate using software. - * @note If GDISP_NEED_CLIPPING is defined this routine MUST behave - * correctly if the circle is over the edges of the screen. - * - * @param[in] x, y The centre of the circle - * @param[in] radius The radius of the circle - * @param[in] color The color of the circle - * - * @notapi - */ - void GDISP_LLD(drawcircle)(coord_t x, coord_t y, coord_t radius, color_t color) { - #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP - /* Code here */ - #endif - /* Code here */ - } -#endif - -#if (GDISP_NEED_CIRCLE && GDISP_HARDWARE_CIRCLEFILLS) || defined(__DOXYGEN__) - /** - * @brief Create a filled circle. - * @note Optional - The high level driver can emulate using software. - * @note If GDISP_NEED_CLIPPING is defined this routine MUST behave - * correctly if the circle is over the edges of the screen. - * - * @param[in] x, y The centre of the circle - * @param[in] radius The radius of the circle - * @param[in] color The color of the circle - * - * @notapi - */ - void GDISP_LLD(fillcircle)(coord_t x, coord_t y, coord_t radius, color_t color) { - #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP - /* Code here */ - #endif - /* Code here */ - } -#endif - -#if (GDISP_NEED_ELLIPSE && GDISP_HARDWARE_ELLIPSES) || defined(__DOXYGEN__) - /** - * @brief Draw an ellipse. - * @note Optional - The high level driver can emulate using software. - * @note If GDISP_NEED_CLIPPING is defined this routine MUST behave - * correctly if the ellipse is over the edges of the screen. - * - * @param[in] x, y The centre of the ellipse - * @param[in] a, b The dimensions of the ellipse - * @param[in] color The color of the ellipse - * - * @notapi - */ - void GDISP_LLD(drawellipse)(coord_t x, coord_t y, coord_t a, coord_t b, color_t color) { - #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP - /* Code here */ - #endif - /* Code here */ - } -#endif - -#if (GDISP_NEED_ELLIPSE && GDISP_HARDWARE_ELLIPSEFILLS) || defined(__DOXYGEN__) - /** - * @brief Create a filled ellipse. - * @note Optional - The high level driver can emulate using software. - * @note If GDISP_NEED_CLIPPING is defined this routine MUST behave - * correctly if the ellipse is over the edges of the screen. - * - * @param[in] x, y The centre of the ellipse - * @param[in] a, b The dimensions of the ellipse - * @param[in] color The color of the ellipse - * - * @notapi - */ - void GDISP_LLD(fillellipse)(coord_t x, coord_t y, coord_t a, coord_t b, color_t color) { - #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP - /* Code here */ - #endif - /* Code here */ - } -#endif - -/* Arc Drawing Functions */ -#if (GDISP_NEED_ARC && GDISP_HARDWARE_ARCS) || defined(__DOXYGEN__) - /** - * @brief Draw an arc. - * @note Optional - The high level driver can emulate using software. - * @note If GDISP_NEED_CLIPPING is defined this routine MUST behave - * correctly if the circle is over the edges of the screen. - * - * @param[in] x, y The centre of the arc circle - * @param[in] radius The radius of the arc circle - * @param[in] startangle, endangle The start and end angles for the arc (0..359) - * @param[in] color The color of the circle - * - * @notapi - */ - void GDISP_LLD(drawarc)(coord_t x, coord_t y, coord_t radius, coord_t startangle, coord_t endangle, color_t color) { - #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP - /* Code here */ - #endif - /* Code here */ - } -#endif - -#if (GDISP_NEED_ARC && GDISP_HARDWARE_ARCFILLS) || defined(__DOXYGEN__) - /** - * @brief Create a filled arc. - * @note Optional - The high level driver can emulate using software. - * @note If GDISP_NEED_CLIPPING is defined this routine MUST behave - * correctly if the circle is over the edges of the screen. - * - * @param[in] x, y The centre of the arc circle - * @param[in] radius The radius of the arc circle - * @param[in] startangle, endangle The start and end angles for the arc (0..359) - * @param[in] color The color of the circle - * - * @notapi - */ - void GDISP_LLD(fillarc)(coord_t x, coord_t y, coord_t radius, coord_t startangle, coord_t endangle, color_t color) { - #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP - /* Code here */ - #endif - /* Code here */ - } -#endif - -#if (GDISP_NEED_TEXT && GDISP_HARDWARE_TEXT) || defined(__DOXYGEN__) - /** - * @brief Draw a character using a transparent background. - * @note Optional - The high level driver can emulate using software. - * - * @param[in] x, y The top-left corner of the text - * @param[in] c The character to print - * @param[in] font The font to use - * @param[in] color The color of the character - * - * @notapi - */ - void GDISP_LLD(drawchar)(coord_t x, coord_t y, char c, font_t font, color_t color) { - #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP - /* Code here */ - #endif - /* Code here */ - } -#endif - -#if (GDISP_NEED_TEXT && GDISP_HARDWARE_TEXTFILLS) || defined(__DOXYGEN__) - /** - * @brief Draw a character using a filled background. - * @note Optional - The high level driver can emulate using software. - * - * @param[in] x, y The top-left corner of the text - * @param[in] c The character to print - * @param[in] font The font to use - * @param[in] color The color of the character - * @param[in] bgcolor The background color - * - * @notapi - */ - void GDISP_LLD(fillchar)(coord_t x, coord_t y, char c, font_t font, color_t color, color_t bgcolor) { - #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP - /* Code here */ - #endif - /* Code here */ - } -#endif - -#if (GDISP_NEED_PIXELREAD && GDISP_HARDWARE_PIXELREAD) || defined(__DOXYGEN__) - /** - * @brief Get the color of a particular pixel. - * @note Optional. - * @note If x,y is off the screen, the result is undefined. - * @return The color of the specified pixel. - * - * @param[in] x, y The start of the text - * - * @notapi - */ - color_t GDISP_LLD(getpixelcolor)(coord_t x, coord_t y) { - #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP - if (x < 0 || x >= GDISP.Width || y < 0 || y >= GDISP.Height) return 0; - #endif - /* Code here */ - } -#endif - -#if (GDISP_NEED_SCROLL && GDISP_HARDWARE_SCROLL) || defined(__DOXYGEN__) - /** - * @brief Scroll vertically a section of the screen. - * @note Optional. - * @note If x,y + cx,cy is off the screen, the result is undefined. - * @note If lines is >= cy, it is equivelent to a area fill with bgcolor. - * - * @param[in] x, y The start of the area to be scrolled - * @param[in] cx, cy The size of the area to be scrolled - * @param[in] lines The number of lines to scroll (Can be positive or negative) - * @param[in] bgcolor The color to fill the newly exposed area. - * - * @notapi - */ - void GDISP_LLD(verticalscroll)(coord_t x, coord_t y, coord_t cx, coord_t cy, int lines, color_t bgcolor) { - #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP - if (x < GDISP.clipx0) { cx -= GDISP.clipx0 - x; x = GDISP.clipx0; } - if (y < GDISP.clipy0) { cy -= GDISP.clipy0 - y; y = GDISP.clipy0; } - if (!lines || cx <= 0 || cy <= 0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return; - if (x+cx > GDISP.clipx1) cx = GDISP.clipx1 - x; - if (y+cy > GDISP.clipy1) cy = GDISP.clipy1 - y; - #endif - /* Code here */ - } -#endif - -#if (GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL) || defined(__DOXYGEN__) - /** - * @brief Driver Control - * @details Unsupported control codes are ignored. - * @note The value parameter should always be typecast to (void *). - * @note There are some predefined and some specific to the low level driver. - * @note GDISP_CONTROL_POWER - Takes a gdisp_powermode_t - * GDISP_CONTROL_ORIENTATION - Takes a gdisp_orientation_t - * GDISP_CONTROL_BACKLIGHT - Takes an int from 0 to 100. For a driver - * that only supports off/on anything other - * than zero is on. - * GDISP_CONTROL_CONTRAST - Takes an int from 0 to 100. - * GDISP_CONTROL_LLD - Low level driver control constants start at - * this value. - * - * @param[in] what What to do. - * @param[in] value The value to use (always cast to a void *). - * - * @notapi - */ - void GDISP_LLD(control)(unsigned what, void *value) { - switch(what) { - case GDISP_CONTROL_POWER: - if (GDISP.Powermode == (gdisp_powermode_t)value) - return; - switch((gdisp_powermode_t)value) { - case powerOff: - /* Code here */ - break; - case powerOn: - /* Code here */ - /* You may need this --- - if (GDISP.Powermode != powerSleep) - GDISP_LLD(init)(); - */ - break; - case powerSleep: - /* Code here */ - break; - default: - return; - } - GDISP.Powermode = (gdisp_powermode_t)value; - return; - case GDISP_CONTROL_ORIENTATION: - if (GDISP.Orientation == (gdisp_orientation_t)value) - return; - switch((gdisp_orientation_t)value) { - case GDISP_ROTATE_0: - /* Code here */ - GDISP.Height = GDISP_SCREEN_HEIGHT; - GDISP.Width = GDISP_SCREEN_WIDTH; - break; - case GDISP_ROTATE_90: - /* Code here */ - GDISP.Height = GDISP_SCREEN_WIDTH; - GDISP.Width = GDISP_SCREEN_HEIGHT; - break; - case GDISP_ROTATE_180: - /* Code here */ - GDISP.Height = GDISP_SCREEN_HEIGHT; - GDISP.Width = GDISP_SCREEN_WIDTH; - break; - case GDISP_ROTATE_270: - /* Code here */ - GDISP.Height = GDISP_SCREEN_WIDTH; - GDISP.Width = GDISP_SCREEN_HEIGHT; - break; - default: - return; - } - #if GDISP_NEED_CLIP || GDISP_NEED_VALIDATION - GDISP.clipx0 = 0; - GDISP.clipy0 = 0; - GDISP.clipx1 = GDISP.Width; - GDISP.clipy1 = GDISP.Height; - #endif - GDISP.Orientation = (gdisp_orientation_t)value; - return; -/* - case GDISP_CONTROL_BACKLIGHT: - case GDISP_CONTROL_CONTRAST: -*/ - } - } -#endif - -#if (GDISP_NEED_QUERY && GDISP_HARDWARE_QUERY) || defined(__DOXYGEN__) -/** - * @brief Query a driver value. - * @details Typecase the result to the type you want. - * @note GDISP_QUERY_WIDTH - (coord_t) Gets the width of the screen - * GDISP_QUERY_HEIGHT - (coord_t) Gets the height of the screen - * GDISP_QUERY_POWER - (gdisp_powermode_t) Get the current powermode - * GDISP_QUERY_ORIENTATION - (gdisp_orientation_t) Get the current screen orientation - * GDISP_QUERY_BACKLIGHT - (coord_t) Get the backlight state (0 to 100) - * GDISP_QUERY_CONTRAST - (coord_t) Get the contrast (0 to 100). - * GDISP_QUERY_LLD - Low level driver control constants start at - * this value. - * - * @param[in] what What to Query - * - * @notapi - */ -void *GDISP_LLD(query)(unsigned what) { - switch(what) { - case GDISP_QUERY_WIDTH: return (void *)(unsigned)GDISP.Width; - case GDISP_QUERY_HEIGHT: return (void *)(unsigned)GDISP.Height; - case GDISP_QUERY_POWER: return (void *)(unsigned)GDISP.Powermode; - case GDISP_QUERY_ORIENTATION: return (void *)(unsigned)GDISP.Orientation; - case GDISP_QUERY_BACKLIGHT: return (void *)(unsigned)GDISP.Backlight; - case GDISP_QUERY_CONTRAST: return (void *)(unsigned)GDISP.Contrast; - case GDISP_QUERY_LLD+0: - /* Code here */ - default: return (void *)-1; - } -} -#endif - -#if GDISP_NEED_CLIP && GDISP_HARDWARE_CLIP - void GDISP_LLD(setclip)(coord_t x, coord_t y, coord_t cx, coord_t cy) { - #if GDISP_NEED_VALIDATION - if (x >= GDISP.Width || y >= GDISP.Height || cx < 0 || cy < 0) - return; - if (x < 0) x = 0; - if (y < 0) y = 0; - if (x+cx > GDISP.Width) cx = GDISP.Width - x; - if (y+cy > GDISP.Height) cy = GDISP.Height - y; - #endif - GDISP.clipx0 = x; - GDISP.clipy0 = y; - GDISP.clipx1 = x+cx; - GDISP.clipy1 = y+cy; - /* Code here to set hardware clipping */ - } -#endif - -#endif /* GFX_USE_GDISP */ -/** @} */ - diff --git a/templates/gdispXXX/gdisp_lld.mk b/templates/gdispXXX/gdisp_lld.mk deleted file mode 100644 index 434d5366..00000000 --- a/templates/gdispXXX/gdisp_lld.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List the required driver. -GFXSRC += $(GFXLIB)/drivers/gdisp/gdispYOURDEVICE/gdisp_lld.c - -# Required include directories -GFXINC += $(GFXLIB)/drivers/gdisp/gdispYOURDEVICE diff --git a/templates/gdispXXX/gdisp_lld_config.h b/templates/gdispXXX/gdisp_lld_config.h deleted file mode 100644 index cde3581d..00000000 --- a/templates/gdispXXX/gdisp_lld_config.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - ChibiOS/GFX - Copyright (C) 2012 - Joel Bodenmann aka Tectu - - This file is part of ChibiOS/GFX. - - ChibiOS/GFX is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/GFX is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/** - * @file templates/gdispXXX/gdisp_lld_config.h - * @brief GDISP Graphic Driver subsystem low level driver header template. - * - * @addtogroup GDISP - * @{ - */ - -#ifndef _GDISP_LLD_CONFIG_H -#define _GDISP_LLD_CONFIG_H - -#if GFX_USE_GDISP /*|| defined(__DOXYGEN__)*/ - -/*===========================================================================*/ -/* Driver hardware support. */ -/*===========================================================================*/ - -#define GDISP_DRIVER_NAME "YourDriverName" -#define GDISP_LLD(x) gdisp_lld_##x##_YourDriverName - -#define GDISP_HARDWARE_LINES FALSE -#define GDISP_HARDWARE_CLEARS FALSE -#define GDISP_HARDWARE_FILLS FALSE -#define GDISP_HARDWARE_BITFILLS FALSE -#define GDISP_HARDWARE_CIRCLES FALSE -#define GDISP_HARDWARE_CIRCLEFILLS FALSE -#define GDISP_HARDWARE_ELLIPSES FALSE -#define GDISP_HARDWARE_ELLIPSEFILLS FALSE -#define GDISP_HARDWARE_ARCS FALSE -#define GDISP_HARDWARE_ARCFILLS FALSE -#define GDISP_HARDWARE_TEXT FALSE -#define GDISP_HARDWARE_TEXTFILLS FALSE -#define GDISP_HARDWARE_SCROLL FALSE -#define GDISP_HARDWARE_PIXELREAD FALSE -#define GDISP_HARDWARE_CONTROL FALSE -#define GDISP_HARDWARE_QUERY FALSE -#define GDISP_HARDWARE_CLIP FALSE - -#define GDISP_SOFTWARE_TEXTFILLDRAW FALSE -#define GDISP_SOFTWARE_TEXTBLITCOLUMN FALSE - -#define GDISP_PIXELFORMAT GDISP_PIXELFORMAT_RGB565 -#define GDISP_PACKED_PIXELS FALSE -#define GDISP_PACKED_LINES FALSE - -#endif /* GFX_USE_GDISP */ - -#endif /* _GDISP_LLD_CONFIG_H */ -/** @} */ - diff --git a/templates/gdispXXX/readme.txt b/templates/gdispXXX/readme.txt deleted file mode 100644 index f173764d..00000000 --- a/templates/gdispXXX/readme.txt +++ /dev/null @@ -1,35 +0,0 @@ -To use this driver template - 1. Copy this entire directory (including the directory itself) - into halext/drivers - 2. Rename the directory to match your hardware. - 3. Customise each file in the directory including the .mk file - and this file. An example for this file is below... - 4. Keep any board specific code in a file you create called - gdisp_lld_board_yourboardname.h and adjust gdisp.c to match. - This enables someone porting to a new board to add another - suitable boad definition without worrying about the rest of - the driver. See the gdispNokia6610 driver as an example. - ------------------------------------------------------------------- -To use this driver: - -1. Add in your halconf.h: - a) #define GFX_USE_GDISP TRUE - b) Any optional high level driver defines (see gdisp.h) eg: GDISP_NEED_MULTITHREAD - c) One (only) of: - #define GDISP_USE_GPIO - #define GDISP_USE_SPI - #define GDISP_USE_FSMC - d) All of the following (with appropriate values): - #define GDISP_SCREEN_WIDTH 128 - #define GDISP_SCREEN_HEIGHT 128 - e) If you are not using a known board then create a gdisp_lld_board.h file - and ensure it is on your include path. - Use the gdisp_lld_board_example.h file as a basis. - Currently known boards are: - XXXXXXXXX - - -2. To your makefile add the following lines: - include $(CHIBIOS)/os/halext/halext.mk - include $(CHIBIOS)/os/halext/drivers/gdispXXXXX/gdisp_lld.mk diff --git a/templates/readme.txt b/templates/readme.txt deleted file mode 100644 index ee2a205b..00000000 --- a/templates/readme.txt +++ /dev/null @@ -1,9 +0,0 @@ -The following low level driver templates are available: - -GDISP: - gdispXXX - Generalised GDISP driver - -TOUCHPAD: - touchpadXXX - Generalised TOUCHPAD driver - - diff --git a/templates/touchpadXXX/touchpad_lld.c b/templates/touchpadXXX/touchpad_lld.c deleted file mode 100644 index c2d898f4..00000000 --- a/templates/touchpadXXX/touchpad_lld.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - ChibiOS/GFX - Copyright (C) 2012 - Joel Bodenmann aka Tectu - - This file is part of ChibiOS/GFX. - - ChibiOS/GFX is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/GFX is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/** - * @file templates/touchpadXXX/touchpad_lld.c - * @brief Touchpad Driver subsystem low level driver source. - * - * @addtogroup TOUCHPAD - * @{ - */ - -#include "ch.h" -#include "hal.h" -#include "touchpad.h" - -#if GFX_USE_TOUCHPAD /*|| defined(__DOXYGEN__)*/ - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/* put needed macros for your interface/driver here. - * when using SPI, macros for setting and clearing CS line - */ -#define TP_CS_HIGH palSetPad(TP_CS_PORT, TP_CS) -#define TP_CS_LOW palClearPad(TP_CS_PORT, TP_CS) - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - - TOUCHPADDriver Touchpad; - -/*===========================================================================*/ -/* Driver local variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/* ---- Required Routines ---- */ - -/** - * @brief Low level Touchpad driver initialization. - * - * @param[in] tp The touchpad driver struct - * - * @notapi - */ -void tp_lld_init(TOUCHPADDriver *tp) { - /* do communicate with the touchpad controller - * to do any inizialisation (mostly spiStart()) - */ -} - -/** - * @brief Reads out the X direction. - * - * @return The uncalibrated X coordinate - * - * @notapi - */ -uint16_t tp_lld_read_x(void) { - uint16_t x; - - /* do communicate with the touchpad controller - * to receive the X-Coordinate - */ - x = 0; - - return x; -} - -/* - * @brief Reads out the Y direction. - * - * @return The uncalibrated Y coordinate - * - * @notapi - */ -uint16_t tp_lld_read_y(void) { - uint16_t y; - - /* do communicate with the touchpad controller - * to receive the Y-Coordinate - */ - y = 0; - - return y; -} - -/* ---- Optional Routines ---- */ -#if TOCHPAD_HAS_IRQ || defined(__DOXYGEN) - /* - * @brief for checking if touchpad is pressed or not. - * - * @return 1 if pressed / 0 if not pressed - * - * @notapi - */ - uint8_t tp_lld_irq(void) { - /* do return PEN IRQ state if your - * touchpad controller does have any - */ - return 0; - } -#endif - -#if TOUCHPAD_HAS_PRESSURE || defined(__DOXYGEN__) - /* - * @brief Reads out the Z direction / pressure. - * - * @notapi - */ - uint16_t tp_lld_read_z(void) { - /* return the pressure */ - return 0; - } -#endif - -#endif /* GFX_USE_TOUCHPAD */ -/** @} */ - diff --git a/templates/touchpadXXX/touchpad_lld.mk b/templates/touchpadXXX/touchpad_lld.mk deleted file mode 100644 index 524a407b..00000000 --- a/templates/touchpadXXX/touchpad_lld.mk +++ /dev/null @@ -1,6 +0,0 @@ -# List the required driver. -GFXSRC += $(GFXLIB)/drivers/touchpad/touchpadYOURDEVICE/touchpad_lld.c - -# Required include directories -GFXINC += $(GFXLIB)/drivers/touchpad/touchpadYOURDEVICE - diff --git a/templates/touchpadXXX/touchpad_lld_config.h b/templates/touchpadXXX/touchpad_lld_config.h deleted file mode 100644 index eb5ccd80..00000000 --- a/templates/touchpadXXX/touchpad_lld_config.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - ChibiOS/GFX - Copyright (C) 2012 - Joel Bodenmann aka Tectu - - This file is part of ChibiOS/GFX. - - ChibiOS/GFX is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/GFX is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/** - * @file templates/touchpadXXX/touchpad_lld_config.h - * @brief Touchppad Driver subsystem low level driver. - * - * @addtogroup TOUCHPAD - * @{ - */ - -#ifndef _TOUCHPAD_LLD_CONFIG_H -#define _TOUCHPAD_LLD_CONFIG_H - -#if GFX_USE_TOUCHPAD /*|| defined(__DOXYGEN__)*/ - -/*===========================================================================*/ -/* Driver hardware support. */ -/*===========================================================================*/ - -#define TOUCHPAD_HAS_IRQ TRUE -#define TOUCHPAD_HAS_PRESSURE TRUE - -#endif /* GFX_USE_TOUCHPAD */ - -#endif /* _TOUCHPAD_LLD_CONFIG_H */ -/** @} */ -