diff --git a/drivers/gdisp/Nokia6610/gdisp_lld.c b/drivers/gdisp/Nokia6610/gdisp_lld.c
index 97fc34b6..facd727d 100644
--- a/drivers/gdisp/Nokia6610/gdisp_lld.c
+++ b/drivers/gdisp/Nokia6610/gdisp_lld.c
@@ -125,7 +125,7 @@ bool_t GDISP_LLD(init)(void) {
 	delayms(20);
 
 	// Get the bus for the following initialisation commands
-	get_bus();
+	aquire_bus();
 	
 	#if defined(GDISP_USE_GE8)
 			write_cmd3(DISCTL, 0x00, 0x20, 0x00);				// Display control
@@ -245,7 +245,7 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) {
 	#if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP
 		if (x < GDISP.clipx0 || y < GDISP.clipy0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return;
 	#endif
-	get_bus();
+	aquire_bus();
 	setviewport(x, y, 1, 1);
 	write_cmd3(RAMWR, 0, (color>>8) & 0x0F, color & 0xFF);
 	release_bus();
@@ -277,7 +277,7 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) {
 		tuples = (cx*cy+1)/2;				// With an odd sized area we over-print by one pixel.
 											// This extra pixel is ignored by the controller.
 
-		get_bus();
+		aquire_bus();
 		setviewport(x, y, cx, cy);
 		write_cmd(RAMWR);
 		for(i=0; i < tuples; i++)
@@ -319,7 +319,7 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) {
 		endx = srcx + cx;
 		endy = y + cy;
 
-		get_bus();
+		aquire_bus();
 		setviewport(x, y, cx, cy);
 		write_cmd(RAMWR);
 
@@ -537,7 +537,7 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) {
 			return;
 		case GDISP_CONTROL_CONTRAST:
 			if ((unsigned)value > 100) value = (void *)100;
-			get_bus();
+			aquire_bus();
 #if defined(GDISP_USE_GE8)
 			write_cmd2(VOLCTR, (unsigned)value, 0x03);
 #elif defined(GDISP_USE_GE12)
diff --git a/drivers/gdisp/Nokia6610/gdisp_lld_board_example.h b/drivers/gdisp/Nokia6610/gdisp_lld_board_example.h
index 8b315935..a4db297f 100644
--- a/drivers/gdisp/Nokia6610/gdisp_lld_board_example.h
+++ b/drivers/gdisp/Nokia6610/gdisp_lld_board_example.h
@@ -76,8 +76,8 @@ static __inline void set_backlight(uint8_t percent) {
  *
  * @notapi
  */
-static __inline void get_bus(void) {
-#error "gdispNokia6610: You must supply a definition for get_bus for your board"
+static __inline void aquire_bus(void) {
+#error "gdispNokia6610: You must supply a definition for aquire_bus for your board"
 }
 
 /**
diff --git a/drivers/gdisp/Nokia6610/gdisp_lld_board_olimexsam7ex256.h b/drivers/gdisp/Nokia6610/gdisp_lld_board_olimexsam7ex256.h
index 7b2aed43..cbfd4486 100644
--- a/drivers/gdisp/Nokia6610/gdisp_lld_board_olimexsam7ex256.h
+++ b/drivers/gdisp/Nokia6610/gdisp_lld_board_olimexsam7ex256.h
@@ -137,8 +137,8 @@ static __inline void set_backlight(uint8_t percent) {
  *
  * @notapi
  */
-static __inline void get_bus(void) {
-	// Nothing to do for this board as the LCD is the only device on the SPI port
+static __inline void aquire_bus(void) {
+	/* Nothing to do for this board as the LCD is the only device on the SPI port */
 }
 
 /**
diff --git a/drivers/gdisp/SSD1289/gdisp_lld.c b/drivers/gdisp/SSD1289/gdisp_lld.c
index f70d585c..f785a532 100644
--- a/drivers/gdisp/SSD1289/gdisp_lld.c
+++ b/drivers/gdisp/SSD1289/gdisp_lld.c
@@ -161,7 +161,7 @@ bool_t GDISP_LLD(init)(void) {
 	delayms(20);
 
 	// Get the bus for the following initialisation commands
-	get_bus();
+	aquire_bus();
 	
 	write_reg(0x0000,0x0001);		delay(5);
     write_reg(0x0003,0xA8A4);    	delay(5);
@@ -241,7 +241,7 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) {
 		if (x < GDISP.clipx0 || y < GDISP.clipy0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return;
 	#endif
 	
-	get_bus();
+	aquire_bus();
 	set_cursor(x, y);
 	write_reg(0x0022, color);
 	release_bus();
@@ -276,7 +276,7 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) {
 	void GDISP_LLD(clear)(color_t color) {
 	    unsigned i;
 
-		get_bus();
+		aquire_bus();
 	    set_cursor(0, 0);
 	    stream_start();
 	    for(i = 0; i < GDISP_SCREEN_WIDTH * GDISP_SCREEN_HEIGHT; i++)
@@ -310,7 +310,7 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) {
 
 		area = cx*cy;
 
-		get_bus();
+		aquire_bus();
 		set_viewport(x, y, cx, cy);
 		stream_start();
 		for(i = 0; i < area; i++)
@@ -346,7 +346,7 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) {
 			if (y+cy > GDISP.clipy1)	cy = GDISP.clipy1 - y;
 		#endif
 
-		get_bus();
+		aquire_bus();
 		set_viewport(x, y, cx, cy);
 		stream_start();
 
@@ -379,7 +379,7 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) {
 			if (x < 0 || x >= GDISP.Width || y < 0 || y >= GDISP.Height) return 0;
 		#endif
 
-		get_bus();
+		aquire_bus();
 		set_cursor(x, y);
 		stream_start();
 		color = read_data();			// dummy read
@@ -419,7 +419,7 @@ void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) {
 
 		abslines = lines < 0 ? -lines : lines;
 
-		get_bus();
+		aquire_bus();
 		if (abslines >= cy) {
 			abslines = cy;
 			gap = 0;
diff --git a/drivers/gdisp/SSD1289/gdisp_lld_board_example.h b/drivers/gdisp/SSD1289/gdisp_lld_board_example.h
index 6dcad1b5..05f7cefa 100644
--- a/drivers/gdisp/SSD1289/gdisp_lld_board_example.h
+++ b/drivers/gdisp/SSD1289/gdisp_lld_board_example.h
@@ -68,8 +68,8 @@ static __inline void set_backlight(uint8_t percent) {
  *
  * @notapi
  */
-static __inline void get_bus(void) {
-#error "SSD1289: You must supply a definition for get_bus for your board"
+static __inline void aquire_bus(void) {
+#error "SSD1289: You must supply a definition for aquire_bus for your board"
 }
 
 /**
diff --git a/drivers/gdisp/SSD1289/gdisp_lld_board_example_fsmc.h b/drivers/gdisp/SSD1289/gdisp_lld_board_example_fsmc.h
index d3532b76..5541a8cd 100644
--- a/drivers/gdisp/SSD1289/gdisp_lld_board_example_fsmc.h
+++ b/drivers/gdisp/SSD1289/gdisp_lld_board_example_fsmc.h
@@ -116,7 +116,7 @@ static __inline void set_backlight(uint8_t percent) {
  *
  * @notapi
  */
-static __inline void get_bus(void) {
+static __inline void aquire_bus(void) {
 	/* Nothing to do here */
 }
 
diff --git a/drivers/gdisp/SSD1289/gdisp_lld_board_firebullstm32f103.h b/drivers/gdisp/SSD1289/gdisp_lld_board_firebullstm32f103.h
index 7d20c341..ad445f9e 100644
--- a/drivers/gdisp/SSD1289/gdisp_lld_board_firebullstm32f103.h
+++ b/drivers/gdisp/SSD1289/gdisp_lld_board_firebullstm32f103.h
@@ -88,7 +88,7 @@ static __inline void set_backlight(uint8_t percent) {
  *
  * @notapi
  */
-static __inline void get_bus(void) {
+static __inline void aquire_bus(void) {
 	/* Nothing to do here */
 }