diff --git a/drivers/gdisp/Nokia6610GE12/board_Nokia6610GE12_olimexsam7ex256.h b/drivers/gdisp/Nokia6610GE12/board_Nokia6610GE12_olimexsam7ex256.h
index e0f8e988..7aad94d3 100644
--- a/drivers/gdisp/Nokia6610GE12/board_Nokia6610GE12_olimexsam7ex256.h
+++ b/drivers/gdisp/Nokia6610GE12/board_Nokia6610GE12_olimexsam7ex256.h
@@ -118,13 +118,10 @@ static inline void init_board(GDisplay *g) {
 	}
 }
 
-/**
- * @brief   Set or clear the lcd reset pin.
- *
- * @param[in] state		TRUE = lcd in reset, FALSE = normal operation
- * 
- * @notapi
- */
+static inline void post_init_board(GDisplay *g) {
+	(void) g;
+}
+
 static inline void setpin_reset(GDisplay *g, bool_t state) {
 	(void) g;
 	if (state)
@@ -133,16 +130,6 @@ static inline void setpin_reset(GDisplay *g, bool_t state) {
 		palSetPad(IOPORT1, PIOA_LCD_RESET);
 }
 
-/**
- * @brief   Set the lcd back-light level.
- * @note	For now 0% turns the backlight off, anything else the backlight is on.
- *			While the hardware supports PWM backlight control, we are not using it
- *			yet.
- *
- * @param[in] percent		0 to 100%
- * 
- * @notapi
- */
 static inline void set_backlight(GDisplay *g, uint8_t percent) {
 	(void) g;
 
@@ -170,33 +157,14 @@ static inline void set_backlight(GDisplay *g, uint8_t percent) {
 	}
 }
 
-/**
- * @brief   Take exclusive control of the bus
- *
- * @notapi
- */
 static inline void acquire_bus(GDisplay *g) {
 	(void) g;
-	/* Nothing to do for this board as the LCD is the only device on the SPI port */
 }
 
-/**
- * @brief   Release exclusive control of the bus
- *
- * @notapi
- */
 static inline void release_bus(GDisplay *g) {
 	(void) g;
-	// Nothing to do for this board as the LCD is the only device on the SPI port
 }
 
-/**
- * @brief   Send an 8 bit command to the lcd.
- *
- * @param[in] cmd		The command to send
- *
- * @notapi
- */
 static inline void write_index(GDisplay *g, uint16_t cmd) {
 	(void) g;
 
@@ -206,13 +174,6 @@ static inline void write_index(GDisplay *g, uint16_t cmd) {
 	pSPI->SPI_TDR = cmd & 0xFF;
 }
 
-/**
- * @brief   Send an 8 bit data to the lcd.
- *
- * @param[in] data		The data to send
- * 
- * @notapi
- */
 static inline void write_data(GDisplay *g, uint16_t data) {
 	(void) g;
 
diff --git a/drivers/gdisp/Nokia6610GE12/gdisp_lld.c b/drivers/gdisp/Nokia6610GE12/gdisp_lld.c
index d190c91a..9aa5ac53 100644
--- a/drivers/gdisp/Nokia6610GE12/gdisp_lld.c
+++ b/drivers/gdisp/Nokia6610GE12/gdisp_lld.c
@@ -106,11 +106,16 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
 	delayms(20);
 
 	acquire_bus(g);
+
 	write_index(g, SLEEPOUT);								// Sleep out
 	write_reg(g, COLMOD, 0x03);							// Color Interface Pixel Format - 0x03 = 12 bits-per-pixel
 	write_reg(g, MADCTL, 0x00);							// Memory access controller
 	write_reg(g, SETCON, 127*GDISP_INITIAL_CONTRAST/100-64);			// Write contrast
 	delayms(20);
+
+    // Finish Init
+    post_init_board(g);
+
 	release_bus(g);
 	
 	/* Turn on the back-light */