diff --git a/drivers/ginput/touch/ADS7843/ginput_lld_mouse_board_firebull_stm32f103.h b/drivers/ginput/touch/ADS7843/ginput_lld_mouse_board_firebull_stm32f103.h
new file mode 100644
index 00000000..72d5932c
--- /dev/null
+++ b/drivers/ginput/touch/ADS7843/ginput_lld_mouse_board_firebull_stm32f103.h
@@ -0,0 +1,89 @@
+/*
+    ChibiOS/RT - Copyright (C) 2012
+                 Joel Bodenmann aka Tectu <joel@unormal.org>
+
+    This file is part of ChibiOS/GFX.
+
+    ChibiOS/GFX is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 3 of the License, or
+    (at your option) any later version.
+
+    ChibiOS/GFX is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file    drivers/ginput/touch/ADS7843/ginput_lld_mouse_board_example.h
+ * @brief   GINPUT Touch low level driver source for the ADS7843 on the example board.
+ *
+ * @addtogroup GINPUT_MOUSE
+ * @{
+ */
+
+#ifndef _GINPUT_LLD_MOUSE_BOARD_H
+#define _GINPUT_LLD_MOUSE_BOARD_H
+
+static const SPIConfig spicfg = { 
+    NULL,
+	GPIOC, 
+    6,
+    /* SPI_CR1_BR_2 |*/ SPI_CR1_BR_1 | SPI_CR1_BR_0,
+};
+
+/**
+ * @brief   Initialise the board for the touch.
+ *
+ * @notapi
+ */
+static __inline void init_board(void) {
+	spiStart(&SPID1, &spicfg);
+}
+
+/**
+ * @brief   Check whether the surface is currently touched
+ * @return	TRUE if the surface is currently touched
+ *
+ * @notapi
+ */
+static __inline bool_t getpin_pressed(void) {
+	return;
+}
+
+/**
+ * @brief   Aquire the bus ready for readings
+ *
+ * @notapi
+ */
+static __inline void aquire_bus(void) {
+	return;
+}
+
+/**
+ * @brief   Release the bus after readings
+ *
+ * @notapi
+ */
+static __inline void release_bus(void) {
+	return;
+}
+
+/**
+ * @brief   Read a value from touch controller
+ * @return	The value read from the controller
+ *
+ * params[in] port	The controller port to read.
+ *
+ * @notapi
+ */
+static __inline uint16_t read_value(uint16_t port) {
+	(void)port;
+}
+
+#endif /* _GINPUT_LLD_MOUSE_BOARD_H */
+/** @} */