Merge branch 'master' of https://bitbucket.org/Tectu/ugfx into gwin
Joel Bodenmann
commit
c88e25b84f
2417
Doxygenfile
2417
Doxygenfile
File diff suppressed because it is too large
Load Diff
|
|
@ -5,8 +5,10 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/* Board interface definitions for ED060SC4 PrimeView E-ink panel.
|
||||
*
|
||||
/**
|
||||
* @file boards/addons/gdisp/board_ED060SC4_example.h
|
||||
* @brief GDISP Graphic Driver subsystem board interface for the ED060SC4 display.
|
||||
*
|
||||
* This file corresponds to the connections shown in example_schematics.png,
|
||||
* and is designed to interface with ChibiOS/RT.
|
||||
*
|
||||
|
|
|
|||
|
|
@ -6,8 +6,11 @@
|
|||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/HX8347D/board_HX8347D_stm32f4discovery.h
|
||||
* @file boards/addons/gdisp/board_HX8347D_stm32f4discovery.h
|
||||
* @brief GDISP Graphic Driver subsystem board SPI interface for the HX8347D display.
|
||||
*
|
||||
* @note This file contains a mix of hardware specific and operating system specific
|
||||
* code. You will need to change it for your CPU and/or operating system.
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_BOARD_H
|
||||
|
|
|
|||
|
|
@ -6,8 +6,11 @@
|
|||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/ILI9320/board_ILI9320_olimex_pic32mx_lcd.h
|
||||
* @brief GDISP Graphic Driver subsystem board interface for the ILI9325 display.
|
||||
* @file boards/addons/gdisp/board_ILI9320_olimex_pic32mx_lcd.h
|
||||
* @brief GDISP Graphic Driver subsystem board SPI interface for the ILI9325 display.
|
||||
*
|
||||
* @note This file contains a mix of hardware specific and operating system specific
|
||||
* code. You will need to change it for your CPU and/or operating system.
|
||||
*/
|
||||
|
||||
#ifndef GDISP_LLD_BOARD_H
|
||||
|
|
|
|||
|
|
@ -19,8 +19,11 @@
|
|||
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/ILI9325/board_ILI9325_hy_stm32_100p.h
|
||||
* @brief GDISP Graphic Driver subsystem board interface for the ILI9325 display.
|
||||
* @file boards/addons/gdisp/board_ILI9325_hy_stm32_100p.h
|
||||
* @brief GDISP Graphic Driver subsystem board SPI interface for the ILI9325 display.
|
||||
*
|
||||
* @note This file contains a mix of hardware specific and operating system specific
|
||||
* code. You will need to change it for your CPU and/or operating system.
|
||||
*/
|
||||
|
||||
#ifndef GDISP_LLD_BOARD_H
|
||||
|
|
|
|||
|
|
@ -0,0 +1,222 @@
|
|||
/*
|
||||
* This file is subject to the terms of the GFX License. If a copy of
|
||||
* the license was not distributed with this file, you can obtain one at:
|
||||
*
|
||||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file boards/addons/gdisp/board_ILI9341_spi.h
|
||||
* @brief GDISP Graphic Driver subsystem board interface for the ILI9341 display.
|
||||
*
|
||||
* @note This file contains a mix of hardware specific and operating system specific
|
||||
* code. You will need to change it for your CPU and/or operating system.
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_BOARD_H
|
||||
#define _GDISP_LLD_BOARD_H
|
||||
|
||||
#define LCD_PORT GPIOB
|
||||
#define LCD_MOSI 15
|
||||
#define LCD_MISO 14
|
||||
#define LCD_SCK 13
|
||||
#define LCD_CS 12
|
||||
#define LCD_DC 11
|
||||
#define LCD_RES 10
|
||||
|
||||
#define LCD_DC_CMD palClearPad(LCD_PORT, LCD_DC)
|
||||
#define LCD_DC_DATA palSetPad(LCD_PORT, LCD_DC)
|
||||
#define LCD_SCK_SET palSetPad(LCD_PORT, LCD_SCK)
|
||||
#define LCD_SCK_RES palClearPad(LCD_PORT, LCD_SCK)
|
||||
#define LCD_CS_RES palSetPad(LCD_PORT, LCD_CS)
|
||||
#define LCD_CS_SET palClearPad(LCD_PORT, LCD_CS)
|
||||
|
||||
/**
|
||||
* SPI configuration structure.
|
||||
* Speed 12 MHz, CPHA=0, CPOL=0, 8bits frames, MSb transmitted first.
|
||||
* Soft slave select.
|
||||
*/
|
||||
static const SPIConfig spi2cfg = {
|
||||
NULL,
|
||||
LCD_PORT,
|
||||
LCD_CS,
|
||||
(SPI_CR1_MSTR | SPI_CR1_SPE | SPI_CR1_SSM | SPI_CR1_SSI)
|
||||
};
|
||||
|
||||
static void send_data(uint16_t data);
|
||||
|
||||
/**
|
||||
* @brief Initialise the board for the display.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @note Set the g->board member to whatever is appropriate. For multiple
|
||||
* displays this might be a pointer to the appropriate register set.
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void init_board(GDisplay *g) {
|
||||
|
||||
// As we are not using multiple displays we set g->board to NULL as we don't use it.
|
||||
g->board = 0;
|
||||
|
||||
palSetPadMode(LCD_PORT, LCD_CS, PAL_MODE_OUTPUT_PUSHPULL);
|
||||
palSetPadMode(LCD_PORT, LCD_DC, PAL_MODE_OUTPUT_PUSHPULL);
|
||||
palSetPadMode(LCD_PORT, LCD_RES, PAL_MODE_OUTPUT_PUSHPULL);
|
||||
|
||||
spiStart(&SPID2, &spi2cfg);
|
||||
spiSelectI(&SPID2);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief After the initialisation.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void post_init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set or clear the lcd reset pin.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] state TRUE = lcd in reset, FALSE = normal operation
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setpin_reset(GDisplay *g, bool_t state) {
|
||||
(void) g;
|
||||
|
||||
if (state == TRUE) {
|
||||
palClearPad(LCD_PORT, LCD_RES);
|
||||
} else {
|
||||
palSetPad(LCD_PORT, LCD_RES);
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the lcd back-light level.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] percent 0 to 100%
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void set_backlight(GDisplay *g, uint8_t percent) {
|
||||
(void) g;
|
||||
(void) percent;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Take exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void acquire_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Release exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void release_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the lcd.
|
||||
*
|
||||
* @param[in] data The data to send
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void send_data(uint16_t data) {
|
||||
// http://forum.easyelectronics.ru/viewtopic.php?p=262122#p262122
|
||||
while (!(SPI2->SR & SPI_SR_TXE)); // ïðè âõîäå íà îòïðàâêó ïðîâåðÿåì - à ïóñòîé ëè SPI_DR
|
||||
SPI2->DR = data; // çàãðóçèëè â SPI_DR êîä êîìàíäû
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the index register.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] index The index register to set
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_index(GDisplay *g, uint16_t index) {
|
||||
(void) g;
|
||||
|
||||
while (SPI2->SR & SPI_SR_BSY);
|
||||
LCD_CS_RES;
|
||||
LCD_DC_CMD; // ïåðåâîäèì äèñïëåé â ðåæèì êîìàíä
|
||||
LCD_CS_SET;
|
||||
send_data(index);
|
||||
while (SPI2->SR & SPI_SR_BSY); // ïîêà ôëàã óñòàíîâëåí (==1) -- ìîäóëü SPI çàíÿò
|
||||
/* ëèøíèé öèêë îæèäàíèÿ îêîí÷àíèÿ ïåðåäà÷è êîìàíäû ïîçâîëÿåò â äàëüíåéøåì ñëàòü
|
||||
* áàéòû äàííûõ áåç íåíóæíûõ îæèäàíèé è çàäåðæåê.
|
||||
*/
|
||||
LCD_DC_DATA; // ïåðåâîäèì äèñïëåé â ðåæèì äàííûõ
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the lcd with DC control.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] data The data to send
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_data(GDisplay *g, uint16_t data) {
|
||||
(void) g;
|
||||
|
||||
send_data(data);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the bus in read mode
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setreadmode(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the bus back into write mode
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setwritemode(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Read data from the lcd.
|
||||
* @return The data from the lcd
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline uint16_t read_data(GDisplay *g) {
|
||||
(void) g;
|
||||
return 0;
|
||||
}
|
||||
|
||||
#endif /* _GDISP_LLD_BOARD_H */
|
||||
|
||||
|
|
@ -6,9 +6,11 @@
|
|||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/ILI9481/board_ILI9481_firebullstm32f103.h
|
||||
* @brief GDISP Graphics Driver subsystem low level driver source for
|
||||
* the ILI9481 and compatible HVGA display
|
||||
* @file boards/addons/gdisp/board_ILI9481_firebullstm32f103.h
|
||||
* @brief GDISP Graphics Driver subsystem low level driver source for the ILI9481 and compatible HVGA display
|
||||
*
|
||||
* @note This file contains a mix of hardware specific and operating system specific
|
||||
* code. You will need to change it for your CPU and/or operating system.
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_BOARD_H
|
||||
|
|
|
|||
|
|
@ -6,8 +6,11 @@
|
|||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/S6D1121/board_S6D1121_olimex_e407.h
|
||||
* @brief GDISP Graphic Driver subsystem board interface for the S6D1121 display
|
||||
* @file boards/addons/gdisp/board_S6D1121_olimex_e407.h
|
||||
* @brief GDISP Graphic Driver subsystem board interface for the S6D1121 display.
|
||||
*
|
||||
* @note This file contains a mix of hardware specific and operating system specific
|
||||
* code. You will need to change it for your CPU and/or operating system.
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_BOARD_H
|
||||
|
|
|
|||
|
|
@ -6,8 +6,11 @@
|
|||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/SSD1289/board_SSD1289_stm32f4discovery.h
|
||||
* @file boards/addons/gdisp/board_SSD1289_stm32f4discovery.h
|
||||
* @brief GDISP Graphic Driver subsystem board interface for the SSD1289 display.
|
||||
*
|
||||
* @note This file contains a mix of hardware specific and operating system specific
|
||||
* code. You will need to change it for your CPU and/or operating system.
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_BOARD_H
|
||||
|
|
|
|||
|
|
@ -6,8 +6,11 @@
|
|||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/SSD1306/board_SSD1306_i2c.h
|
||||
* @file boards/addons/gdisp/board_SSD1306_i2c.h
|
||||
* @brief GDISP Graphic Driver subsystem board interface for the SSD1306 display.
|
||||
*
|
||||
* @note This file contains a mix of hardware specific and operating system specific
|
||||
* code. You will need to change it for your CPU and/or operating system.
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_BOARD_H
|
||||
|
|
|
|||
|
|
@ -6,8 +6,11 @@
|
|||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/SSD1306/board_SSD1306_spi.h
|
||||
* @file boards/addons/gdisp/board_SSD1306_spi.h
|
||||
* @brief GDISP Graphic Driver subsystem board interface for the SSD1306 display.
|
||||
*
|
||||
* @note This file contains a mix of hardware specific and operating system specific
|
||||
* code. You will need to change it for your CPU and/or operating system.
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_BOARD_H
|
||||
|
|
|
|||
|
|
@ -6,8 +6,11 @@
|
|||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/SSD1963/board_SSD1963_fsmc.h
|
||||
* @file boards/addons/gdisp/board_SSD1963_fsmc.h
|
||||
* @brief GDISP Graphic Driver subsystem board interface for the SSD1963 display.
|
||||
*
|
||||
* @note This file contains a mix of hardware specific and operating system specific
|
||||
* code. You will need to change it for your CPU and/or operating system.
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_BOARD_H
|
||||
|
|
|
|||
|
|
@ -6,8 +6,11 @@
|
|||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/SSD1963/board_SSD1963_gpio.h
|
||||
* @file boards/addons/gdisp/board_SSD1963_gpio.h
|
||||
* @brief GDISP Graphic Driver subsystem board interface for the SSD1963 display.
|
||||
*
|
||||
* @note This file contains a mix of hardware specific and operating system specific
|
||||
* code. You will need to change it for your CPU and/or operating system.
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_BOARD_H
|
||||
|
|
|
|||
|
|
@ -6,12 +6,11 @@
|
|||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/ginput/touch/ADS7843/ginput_lld_mouse_board_olimex_stm32_e407.h
|
||||
* @file boards/addons/ginput/touch/ADS7843/ginput_lld_mouse_board_olimex_stm32_e407.h
|
||||
* @brief GINPUT Touch low level driver source for the ADS7843 on an Olimex STM32E407.
|
||||
*
|
||||
* @defgroup Mouse Mouse
|
||||
* @ingroup GINPUT
|
||||
* @{
|
||||
* @note This file contains a mix of hardware specific and operating system specific
|
||||
* code. You will need to change it for your CPU and/or operating system.
|
||||
*/
|
||||
|
||||
#ifndef _GINPUT_LLD_MOUSE_BOARD_H
|
||||
|
|
@ -87,4 +86,4 @@ static inline uint16_t read_value(uint16_t port) {
|
|||
}
|
||||
|
||||
#endif /* _GINPUT_LLD_MOUSE_BOARD_H */
|
||||
/** @} */
|
||||
|
||||
|
|
|
|||
|
|
@ -5,6 +5,14 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file boards/addons/ginput/touch/ADS7843/ginput_lld_mouse_board_st_stm32f4_discovery.h
|
||||
* @brief GINPUT Touch low level driver source for the ADS7843 on an st_stm32f4_discovery.
|
||||
*
|
||||
* @note This file contains a mix of hardware specific and operating system specific
|
||||
* code. You will need to change it for your CPU and/or operating system.
|
||||
*/
|
||||
|
||||
#ifndef _GINPUT_LLD_MOUSE_BOARD_H
|
||||
#define _GINPUT_LLD_MOUSE_BOARD_H
|
||||
|
||||
|
|
|
|||
|
|
@ -6,13 +6,11 @@
|
|||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/ginput/touch/MCU/ginput_lld_mouse_board_olimex_stm32_lcd.h
|
||||
* @file boards/addons/ginput/touch/MCU/ginput_lld_mouse_board_olimex_stm32_lcd.h
|
||||
* @brief GINPUT Touch low level driver source for the MCU on the example board.
|
||||
*
|
||||
* @defgroup Mouse Mouse
|
||||
* @ingroup GINPUT
|
||||
*
|
||||
* @{
|
||||
* @note This file contains a mix of hardware specific and operating system specific
|
||||
* code. You will need to change it for your CPU and/or operating system.
|
||||
*/
|
||||
|
||||
#ifndef _GINPUT_LLD_MOUSE_BOARD_H
|
||||
|
|
|
|||
|
|
@ -153,6 +153,7 @@ LD = $(TRGT)gcc
|
|||
CP = $(TRGT)objcopy
|
||||
AS = $(TRGT)gcc -x assembler-with-cpp
|
||||
OD = $(TRGT)objdump
|
||||
SZ = $(TRGT)size
|
||||
HEX = $(CP) -O ihex
|
||||
BIN = $(CP) -O binary
|
||||
|
||||
|
|
|
|||
|
|
@ -29,6 +29,10 @@
|
|||
*/
|
||||
|
||||
#define STM32F4xx_MCUCONF
|
||||
#define STM32F40_41xxx
|
||||
|
||||
// Define this if you are using an older ChibiOS version
|
||||
//#define STM32_VOS STM32_VOS_HIGH
|
||||
|
||||
/*
|
||||
* HAL driver system settings.
|
||||
|
|
@ -57,7 +61,6 @@
|
|||
#define STM32_I2SSRC STM32_I2SSRC_CKIN
|
||||
#define STM32_PLLI2SN_VALUE 192
|
||||
#define STM32_PLLI2SR_VALUE 5
|
||||
#define STM32_VOS STM32_VOS_HIGH
|
||||
#define STM32_PVD_ENABLE FALSE
|
||||
#define STM32_PLS STM32_PLS_LEV0
|
||||
#define STM32_BKPRAM_ENABLE FALSE
|
||||
|
|
|
|||
|
|
@ -6,3 +6,4 @@ include $(GFXLIB)/drivers/gadc/AT91SAM7/gadc_lld.mk
|
|||
include $(GFXLIB)/drivers/ginput/dial/GADC/ginput_lld.mk
|
||||
include $(GFXLIB)/drivers/ginput/toggle/Pal/ginput_lld.mk
|
||||
include $(GFXLIB)/drivers/gaudio/gadc/driver.mk
|
||||
include $(GFXLIB)/drivers/gaudio/pwm/driver.mk
|
||||
|
|
|
|||
|
|
@ -136,6 +136,7 @@ LD = $(TRGT)gcc
|
|||
CP = $(TRGT)objcopy
|
||||
AS = $(TRGT)gcc -x assembler-with-cpp
|
||||
OD = $(TRGT)objdump
|
||||
SZ = $(TRGT)size
|
||||
HEX = $(CP) -O ihex
|
||||
BIN = $(CP) -O binary
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@
|
|||
* @brief Enables the GPT subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_GPT FALSE
|
||||
#define HAL_USE_GPT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
@ -116,10 +116,6 @@
|
|||
*/
|
||||
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_PWM TRUE
|
||||
#define PWM_USE_PWM1 FALSE
|
||||
#define PWM_USE_PWM2 TRUE
|
||||
#define PWM_USE_PWM3 FALSE
|
||||
#define PWM_USE_PWM4 FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -52,6 +52,10 @@
|
|||
/*
|
||||
* PWM driver system settings.
|
||||
*/
|
||||
#define PWM_USE_PWM1 TRUE // used by audio-out
|
||||
#define PWM_USE_PWM2 TRUE // used by back-light
|
||||
#define PWM_USE_PWM3 FALSE
|
||||
#define PWM_USE_PWM4 FALSE
|
||||
|
||||
/*
|
||||
* SERIAL driver system settings.
|
||||
|
|
@ -69,3 +73,10 @@
|
|||
#define AT91SAM7_SPI_USE_SPI1 FALSE
|
||||
#define AT91SAM7_SPI0_PRIORITY (AT91C_AIC_PRIOR_HIGHEST - 1)
|
||||
#define AT91SAM7_SPI1_PRIORITY (AT91C_AIC_PRIOR_HIGHEST - 1)
|
||||
|
||||
/*
|
||||
* GPT driver system settings.
|
||||
*/
|
||||
#define AT91_GPT_USE_TC0 FALSE // used internally by ADC driver
|
||||
#define AT91_GPT_USE_TC1 TRUE // uGFX used for audio-out
|
||||
#define AT91_GPT_USE_TC2 FALSE
|
||||
|
|
|
|||
|
|
@ -0,0 +1,75 @@
|
|||
/*
|
||||
* This file is subject to the terms of the GFX License. If a copy of
|
||||
* the license was not distributed with this file, you can obtain one at:
|
||||
*
|
||||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
#ifndef GAUDIO_PLAY_BOARD_H
|
||||
#define GAUDIO_PLAY_BOARD_H
|
||||
|
||||
/* Our timer callback */
|
||||
static void gptcallback(GPTDriver *gptp) {
|
||||
(void) gptp;
|
||||
gaudio_play_pwm_timer_callbackI();
|
||||
}
|
||||
|
||||
/* PWM configuration structure. The speaker is on PWM0/PB19 ie PWM1/PIN1 in ChibiOS speak */
|
||||
static PWMConfig pwmcfg = {
|
||||
1000000, /* 1 MHz PWM clock frequency. Ignored as we are using PWM_MCK_DIV_n */
|
||||
1024, /* PWM period is 1024 cycles (10 bits). */
|
||||
0,
|
||||
{
|
||||
{PWM_MCK_DIV_1 | PWM_OUTPUT_CENTER | PWM_OUTPUT_ACTIVE_HIGH | PWM_OUTPUT_PIN1 | PWM_DISABLEPULLUP_PIN1, 0},
|
||||
},
|
||||
};
|
||||
|
||||
/* Timer configuration structure. We use Timer 2 (TC1) */
|
||||
static GPTConfig gptcfg = {
|
||||
8192, // frequency
|
||||
gptcallback, // callback
|
||||
GPT_CLOCK_FREQUENCY, // clocksource
|
||||
GPT_GATE_NONE, // clockgate
|
||||
GPT_TRIGGER_NONE, // trigger
|
||||
};
|
||||
|
||||
static uint16_t lastvalue;
|
||||
|
||||
static bool gaudio_play_pwm_setup(uint32_t frequency, ArrayDataFormat format) {
|
||||
if (format == ARRAY_DATA_10BITUNSIGNED)
|
||||
pwmcfg.period = 1024;
|
||||
else if (format == ARRAY_DATA_8BITUNSIGNED)
|
||||
pwmcfg.period = 256;
|
||||
else
|
||||
return FALSE;
|
||||
gptcfg.frequency = frequency;
|
||||
return TRUE;
|
||||
}
|
||||
|
||||
static void gaudio_play_pwm_start(void) {
|
||||
/* Start the PWM */
|
||||
pwmStart(&PWMD1, &pwmcfg);
|
||||
lastvalue = pwmcfg.period>>1;
|
||||
pwmEnableChannelI(&PWMD1, 0, lastvalue);
|
||||
|
||||
/* Start the timer interrupt */
|
||||
gptStart(&GPTD2, &gptcfg);
|
||||
gptStartContinuous(&GPTD2, 0);
|
||||
}
|
||||
|
||||
static void gaudio_play_pwm_stop(void) {
|
||||
/* Stop the timer interrupt */
|
||||
gptStopTimer(&GPTD2);
|
||||
|
||||
/* Stop the PWM */
|
||||
pwmStop(&PWMD1);
|
||||
}
|
||||
|
||||
static void gaudio_play_pwm_setI(uint16_t value) {
|
||||
if (value != lastvalue) {
|
||||
lastvalue = value;
|
||||
pwmEnableChannelI(&PWMD1, 0, value);
|
||||
}
|
||||
}
|
||||
|
||||
#endif /* GAUDIO_PLAY_BOARD_H */
|
||||
|
|
@ -19,13 +19,18 @@
|
|||
|
||||
#define GAUDIO_RECORD_NUM_CHANNELS 1
|
||||
|
||||
/**
|
||||
* @brief Whether each channel is mono or stereo
|
||||
*/
|
||||
#define GAUDIO_RECORD_CHANNEL0_IS_STEREO FALSE
|
||||
|
||||
/**
|
||||
* The list of audio channels and their uses
|
||||
*/
|
||||
#define GAUDIO_RECORD_MICROPHONE 0
|
||||
|
||||
#ifdef GAUDIO_RECORD_IMPLEMENTATION
|
||||
static uint32_t gaudin_lld_physdevs[GAUDIO_RECORD_NUM_CHANNELS] = {
|
||||
static uint32_t gaudio_gadc_physdevs[GAUDIO_RECORD_NUM_CHANNELS] = {
|
||||
GADC_PHYSDEV_MICROPHONE,
|
||||
};
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -51,7 +51,6 @@
|
|||
#define GDISP_NEED_VALIDATION TRUE
|
||||
#define GDISP_NEED_CLIP TRUE
|
||||
#define GDISP_NEED_TEXT TRUE
|
||||
#define GDISP_NEED_CONTROL TRUE
|
||||
#define GDISP_NEED_MULTITHREAD TRUE
|
||||
|
||||
/* GDISP - builtin fonts */
|
||||
|
|
|
|||
|
|
@ -38,9 +38,6 @@
|
|||
/* Include internal GWIN routines so we can build our own superset class */
|
||||
#include "src/gwin/class_gwin.h"
|
||||
|
||||
/* The size of our dynamically allocated audio buffer */
|
||||
#define AUDIOBUFSZ 64*2
|
||||
|
||||
/* How many flat-line sample before we trigger */
|
||||
#define FLATLINE_SAMPLES 8
|
||||
|
||||
|
|
@ -50,10 +47,6 @@ static void _destroy(GHandle gh) {
|
|||
gfxFree(((GScopeObject *)gh)->lastscopetrace);
|
||||
((GScopeObject *)gh)->lastscopetrace = 0;
|
||||
}
|
||||
if (((GScopeObject *)gh)->audiobuf) {
|
||||
gfxFree(((GScopeObject *)gh)->audiobuf);
|
||||
((GScopeObject *)gh)->audiobuf = 0;
|
||||
}
|
||||
}
|
||||
|
||||
static const gwinVMT scopeVMT = {
|
||||
|
|
@ -68,12 +61,9 @@ GHandle gwinGScopeCreate(GDisplay *g, GScopeObject *gs, GWindowInit *pInit, uint
|
|||
/* Initialise the base class GWIN */
|
||||
if (!(gs = (GScopeObject *)_gwindowCreate(g, &gs->g, pInit, &scopeVMT, 0)))
|
||||
return 0;
|
||||
gfxSemInit(&gs->bsem, 0, 1);
|
||||
gs->nextx = 0;
|
||||
if (!(gs->lastscopetrace = gfxAlloc(gs->g.width * sizeof(coord_t))))
|
||||
return 0;
|
||||
if (!(gs->audiobuf = gfxAlloc(AUDIOBUFSZ * sizeof(adcsample_t))))
|
||||
return 0;
|
||||
#if TRIGGER_METHOD == TRIGGER_POSITIVERAMP
|
||||
gs->lasty = gs->g.height/2;
|
||||
#elif TRIGGER_METHOD == TRIGGER_MINVALUE
|
||||
|
|
@ -82,8 +72,7 @@ GHandle gwinGScopeCreate(GDisplay *g, GScopeObject *gs, GWindowInit *pInit, uint
|
|||
#endif
|
||||
|
||||
/* Start the GADC high speed converter */
|
||||
gadcHighSpeedInit(physdev, frequency, gs->audiobuf, AUDIOBUFSZ, AUDIOBUFSZ/2);
|
||||
gadcHighSpeedSetBSem(&gs->bsem, &gs->myEvent);
|
||||
gadcHighSpeedInit(physdev, frequency);
|
||||
gadcHighSpeedStart();
|
||||
|
||||
gwinSetVisible((GHandle)gs, pInit->show);
|
||||
|
|
@ -97,6 +86,8 @@ void gwinScopeWaitForTrace(GHandle gh) {
|
|||
coord_t yoffset;
|
||||
adcsample_t *pa;
|
||||
coord_t *pc;
|
||||
GDataBuffer *pd;
|
||||
uint8_t shr;
|
||||
#if TRIGGER_METHOD == TRIGGER_POSITIVERAMP
|
||||
bool_t rdytrigger;
|
||||
int flsamples;
|
||||
|
|
@ -109,20 +100,21 @@ void gwinScopeWaitForTrace(GHandle gh) {
|
|||
if (gh->vmt != &scopeVMT)
|
||||
return;
|
||||
|
||||
/* Wait for a set of audio conversions */
|
||||
gfxSemWait(&gs->bsem, TIME_INFINITE);
|
||||
/* Wait for a set of conversions */
|
||||
pd = gadcHighSpeedGetData(TIME_INFINITE);
|
||||
|
||||
/* Ensure we are drawing in the right area */
|
||||
#if GDISP_NEED_CLIP
|
||||
gdispGSetClip(gh->display, gh->x, gh->y, gh->width, gh->height);
|
||||
#endif
|
||||
|
||||
shr = 16 - gfxSampleFormatBits(GADC_SAMPLE_FORMAT);
|
||||
yoffset = gh->height/2;
|
||||
if (!(GADC_SAMPLE_FORMAT & 1))
|
||||
if (!gfxSampleFormatIsSigned(GADC_SAMPLE_FORMAT))
|
||||
yoffset += (1<<SCOPE_Y_BITS)/2;
|
||||
x = gs->nextx;
|
||||
pc = gs->lastscopetrace+x;
|
||||
pa = gs->myEvent.buffer;
|
||||
pa = (adcsample_t *)(pd+1);
|
||||
#if TRIGGER_METHOD == TRIGGER_POSITIVERAMP
|
||||
rdytrigger = FALSE;
|
||||
flsamples = 0;
|
||||
|
|
@ -132,14 +124,10 @@ void gwinScopeWaitForTrace(GHandle gh) {
|
|||
scopemin = 0;
|
||||
#endif
|
||||
|
||||
for(i = gs->myEvent.count; i; i--) {
|
||||
for(i = pd->len/sizeof(adcsample_t); i; i--) {
|
||||
|
||||
/* Calculate the new scope value - re-scale using simple shifts for efficiency, re-center and y-invert */
|
||||
#if GADC_BITS_PER_SAMPLE > SCOPE_Y_BITS
|
||||
y = yoffset - (*pa++ >> (GADC_BITS_PER_SAMPLE - SCOPE_Y_BITS));
|
||||
#else
|
||||
y = yoffset - (*pa++ << (SCOPE_Y_BITS - GADC_BITS_PER_SAMPLE));
|
||||
#endif
|
||||
y = yoffset - (((coord_t)(*pa++) << shr) >> (16-SCOPE_Y_BITS));
|
||||
|
||||
#if TRIGGER_METHOD == TRIGGER_MINVALUE
|
||||
/* Calculate the scopemin ready for the next trace */
|
||||
|
|
@ -205,5 +193,7 @@ void gwinScopeWaitForTrace(GHandle gh) {
|
|||
gs->scopemin = scopemin;
|
||||
#endif
|
||||
|
||||
gfxBufferRelease(pd);
|
||||
|
||||
#undef gs
|
||||
}
|
||||
|
|
|
|||
|
|
@ -43,7 +43,7 @@
|
|||
|
||||
/* The extent of scaling for our audio data - fixed scale at the moment */
|
||||
#ifndef SCOPE_Y_BITS
|
||||
#define SCOPE_Y_BITS 7 // 7 bits = 0..128
|
||||
#define SCOPE_Y_BITS 7 // 7 bits = 0..128
|
||||
#endif
|
||||
|
||||
/* Trigger methods */
|
||||
|
|
@ -64,9 +64,6 @@ typedef struct GScopeObject_t {
|
|||
GWindowObject g; // Base Class
|
||||
|
||||
coord_t *lastscopetrace; // To store last scope trace
|
||||
gfxSem bsem; // We get signalled on this
|
||||
adcsample_t *audiobuf; // To store audio samples
|
||||
GEventADC myEvent; // Information on received samples
|
||||
coord_t nextx; // Where we are up to
|
||||
#if TRIGGER_METHOD == TRIGGER_POSITIVERAMP
|
||||
coord_t lasty; // The last y value - used for trigger slope detection
|
||||
|
|
|
|||
|
|
@ -167,6 +167,20 @@ int main(void) {
|
|||
gtimerStart(&lsTimer, LowSpeedTimer, ghText, TRUE, MY_LS_DELAY);
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Allocate buffers for the high speed GADC device - eg. 4 x 128 byte buffers.
|
||||
* You may need to increase this for slower cpu's.
|
||||
* You may be able to decrease this for low latency operating systems.
|
||||
* 4 x 128 seems to work on the really slow Olimex SAM7EX256 board (display speed limitation)
|
||||
* If your oscilloscope display stops but the low speed reading keep going then it is likely that
|
||||
* your high speed timer has stalled due to running out of free buffers. Increase the number
|
||||
* of buffers..
|
||||
* If you make the buffers too large with a slow sample rate you may not allow enough time for all
|
||||
* the low speed items to occur in which case your memory will fill up with low speed requests until
|
||||
* you run out of memory.
|
||||
*/
|
||||
gfxBufferAlloc(4, 128);
|
||||
|
||||
/* Set up the scope window in the top right on the screen */
|
||||
{
|
||||
GWindowInit wi;
|
||||
|
|
|
|||
|
|
@ -45,7 +45,6 @@
|
|||
#define GFX_USE_GDISP TRUE
|
||||
#define GFX_USE_GWIN TRUE
|
||||
#define GFX_USE_GTIMER TRUE
|
||||
//#define GFX_USE_GADC TRUE
|
||||
#define GFX_USE_GAUDIO TRUE
|
||||
|
||||
/* Features for the GDISP sub-system. */
|
||||
|
|
|
|||
|
|
@ -96,7 +96,7 @@ GHandle gwinGScopeCreate(GDisplay *g, GScopeObject *gs, GWindowInit *pInit, uint
|
|||
|
||||
void gwinScopeWaitForTrace(GHandle gh) {
|
||||
#define gs ((GScopeObject *)(gh))
|
||||
GAudioData *paud;
|
||||
GDataBuffer *paud;
|
||||
int i;
|
||||
coord_t x, y;
|
||||
coord_t yoffset;
|
||||
|
|
@ -144,10 +144,10 @@ void gwinScopeWaitForTrace(GHandle gh) {
|
|||
scopemin = 0;
|
||||
#endif
|
||||
|
||||
for(i = paud->len/(gfxSampleFormatBits(gs->format)/8); i; i--) {
|
||||
for(i = paud->len/((gfxSampleFormatBits(gs->format)+7)/8); i; i--) {
|
||||
|
||||
/* Calculate the new scope value - re-scale using simple shifts for efficiency, re-center and y-invert */
|
||||
if (gs->format <= 8)
|
||||
if (gfxSampleFormatBits(gs->format) <= 8)
|
||||
y = yoffset - (((coord_t)(*pa8++ ) << shr) >> (16-SCOPE_Y_BITS));
|
||||
else
|
||||
y = yoffset - (((coord_t)(*pa16++) << shr) >> (16-SCOPE_Y_BITS));
|
||||
|
|
@ -216,6 +216,6 @@ void gwinScopeWaitForTrace(GHandle gh) {
|
|||
gs->scopemin = scopemin;
|
||||
#endif
|
||||
|
||||
gaudioReleaseBuffer(paud);
|
||||
gfxBufferRelease(paud);
|
||||
#undef gs
|
||||
}
|
||||
|
|
|
|||
|
|
@ -55,10 +55,15 @@ int main(void) {
|
|||
|
||||
gfxInit();
|
||||
|
||||
// Allocate audio buffers - 4 x 128 byte buffers.
|
||||
// You may need to increase this for slower cpu's.
|
||||
// You may be able to decrease this for low latency operating systems.
|
||||
gaudioAllocBuffers(4, 128);
|
||||
/**
|
||||
* Allocate audio buffers - eg. 4 x 128 byte buffers.
|
||||
* You may need to increase this for slower cpu's.
|
||||
* You may be able to decrease this for low latency operating systems.
|
||||
* 8 x 256 seems to work on the really slow Olimex SAM7EX256 board (display speed limitation) @8kHz
|
||||
* If your oscilloscope display stops then it is likely that your driver has stalled due to running
|
||||
* out of free buffers. Increase the number of buffers..
|
||||
*/
|
||||
gfxBufferAlloc(8, 256);
|
||||
|
||||
/* Get the screen dimensions */
|
||||
swidth = gdispGetWidth();
|
||||
|
|
|
|||
|
|
@ -52,7 +52,7 @@ int main(void) {
|
|||
uint32_t frequency;
|
||||
ArrayDataFormat datafmt;
|
||||
uint32_t len;
|
||||
GAudioData *paud;
|
||||
GDataBuffer *pd;
|
||||
|
||||
// Initialise everything
|
||||
gfxInit();
|
||||
|
|
@ -64,11 +64,12 @@ int main(void) {
|
|||
// Allocate audio buffers - 4 x 512 byte buffers.
|
||||
// You may need to increase this for slower cpu's.
|
||||
// You may be able to decrease this for low latency operating systems.
|
||||
if (!gaudioAllocBuffers(4, 512)) {
|
||||
if (!gfxBufferAlloc(4, 512)) {
|
||||
errmsg = "Err: No Memory";
|
||||
goto theend;
|
||||
}
|
||||
|
||||
repeatplay:
|
||||
// Open the wave file
|
||||
if (!(f = gfileOpen("allwrong.wav", "r"))) {
|
||||
errmsg = "Err: Open WAV";
|
||||
|
|
@ -164,20 +165,20 @@ int main(void) {
|
|||
gdispDrawString(0, gdispGetHeight()/2, "Playing...", font, Yellow);
|
||||
while(toplay) {
|
||||
// Get a buffer to put the data into
|
||||
paud = gaudioGetBuffer(TIME_INFINITE); // This should never fail as we are waiting forever
|
||||
pd = gfxBufferGet(TIME_INFINITE); // This should never fail as we are waiting forever
|
||||
|
||||
// How much data can we put in
|
||||
len = toplay > paud->size ? paud->size : toplay;
|
||||
paud->len = len;
|
||||
len = toplay > pd->size ? pd->size : toplay;
|
||||
pd->len = len;
|
||||
toplay -= len;
|
||||
|
||||
// Read the data
|
||||
if (gfileRead(f, paud+1, len) != len) {
|
||||
if (gfileRead(f, pd+1, len) != len) {
|
||||
errmsg = "Err: Read fail";
|
||||
goto theend;
|
||||
}
|
||||
|
||||
gaudioPlay(paud);
|
||||
gaudioPlay(pd);
|
||||
}
|
||||
gfileClose(f);
|
||||
|
||||
|
|
@ -185,6 +186,11 @@ int main(void) {
|
|||
gaudioPlayWait(TIME_INFINITE);
|
||||
gdispDrawString(0, gdispGetHeight()/2+10, "Done", font, Green);
|
||||
|
||||
// Repeat the whole thing
|
||||
gfxSleepMilliseconds(1500);
|
||||
gdispClear(Black);
|
||||
goto repeatplay;
|
||||
|
||||
// The end
|
||||
theend:
|
||||
if (errmsg)
|
||||
|
|
|
|||
|
|
@ -8,10 +8,6 @@
|
|||
/**
|
||||
* @file drivers/gadc/AT91SAM7/gadc_lld.c
|
||||
* @brief GADC - Periodic ADC driver source file for the AT91SAM7 cpu.
|
||||
*
|
||||
* @defgroup Driver Driver
|
||||
* @ingroup GADC
|
||||
* @{
|
||||
*/
|
||||
|
||||
#include "gfx.h"
|
||||
|
|
@ -20,69 +16,73 @@
|
|||
|
||||
#include "src/gadc/driver.h"
|
||||
|
||||
static uint32_t nextfreq;
|
||||
|
||||
// Forward references to ISR routines
|
||||
static void ISR_CompleteI(ADCDriver *adcp, adcsample_t *buffer, size_t n);
|
||||
static void ISR_ErrorI(ADCDriver *adcp, adcerror_t err);
|
||||
|
||||
static ADCConversionGroup acg = {
|
||||
FALSE, // circular
|
||||
1, // num_channels
|
||||
GADC_ISR_CompleteI, // end_cb
|
||||
GADC_ISR_ErrorI, // error_cb
|
||||
ISR_CompleteI, // end_cb
|
||||
ISR_ErrorI, // error_cb
|
||||
0, // channelselects
|
||||
0, // trigger
|
||||
0, // frequency
|
||||
};
|
||||
|
||||
static void ISR_CompleteI(ADCDriver *adcp, adcsample_t *buffer, size_t n) {
|
||||
(void) adcp;
|
||||
(void) buffer;
|
||||
|
||||
gadcGotDataI(n);
|
||||
}
|
||||
|
||||
static void ISR_ErrorI(ADCDriver *adcp, adcerror_t err) {
|
||||
(void) adcp;
|
||||
(void) err;
|
||||
|
||||
gadcGotDataI(0);
|
||||
}
|
||||
|
||||
void gadc_lld_init(void) {
|
||||
adcStart(&ADCD1, 0);
|
||||
}
|
||||
|
||||
size_t gadc_lld_samples_per_conversion(uint32_t physdev) {
|
||||
size_t cnt;
|
||||
int i;
|
||||
size_t gadc_lld_samplesperconversion(uint32_t physdev) {
|
||||
size_t samples;
|
||||
|
||||
/* The AT91SAM7 has AD0..7 - physdev is a bitmap of those channels */
|
||||
for(cnt = 0, i = 0; i < 8; i++, physdev >>= 1)
|
||||
for(samples = 0; physdev; physdev >>= 1)
|
||||
if (physdev & 0x01)
|
||||
cnt++;
|
||||
return cnt;
|
||||
samples++;
|
||||
return samples;
|
||||
}
|
||||
|
||||
void gadc_lld_start_timer(uint32_t physdev, uint32_t frequency) {
|
||||
(void) physdev;
|
||||
/**
|
||||
* The AT91SAM7 ADC driver supports triggering the ADC using a timer without having to implement
|
||||
* an interrupt handler for the timer. The driver also initialises the timer correctly for us.
|
||||
* Because we aren't trapping the interrupt ourselves we can't increment GADC_Timer_Missed if an
|
||||
* interrupt is missed.
|
||||
*/
|
||||
acg.frequency = frequency;
|
||||
void gadc_lld_start_timerI(uint32_t frequency) {
|
||||
// Nothing to do here - the AT91SAM7 adc driver uses an internal timer
|
||||
// which is set up when the job is started. We save this here just to
|
||||
// indicate the timer should be re-initialised on the next timer job
|
||||
nextfreq = frequency;
|
||||
}
|
||||
|
||||
void gadc_lld_stop_timer(uint32_t physdev) {
|
||||
(void) physdev;
|
||||
if ((acg.trigger & ~ADC_TRIGGER_SOFTWARE) == ADC_TRIGGER_TIMER)
|
||||
adcStop(&ADCD1);
|
||||
void gadc_lld_stop_timerI(void) {
|
||||
// Nothing to do here. The AT91SAM7 adc driver automatically turns off timer interrupts
|
||||
// on completion of the job
|
||||
}
|
||||
|
||||
void gadc_lld_adc_timerI(GadcLldTimerData *pgtd) {
|
||||
/**
|
||||
* We don't need to calculate num_channels because the AT91SAM7 ADC does this for us.
|
||||
*/
|
||||
acg.channelselects = pgtd->physdev;
|
||||
acg.trigger = pgtd->now ? (ADC_TRIGGER_TIMER|ADC_TRIGGER_SOFTWARE) : ADC_TRIGGER_TIMER;
|
||||
|
||||
adcStartConversionI(&ADCD1, &acg, pgtd->buffer, pgtd->count);
|
||||
|
||||
/* Next time assume the same (still running) timer */
|
||||
acg.frequency = 0;
|
||||
void gadc_lld_timerjobI(GadcTimerJob *pj) {
|
||||
acg.channelselects = pj->physdev;
|
||||
acg.trigger = ADC_TRIGGER_TIMER;
|
||||
acg.frequency = nextfreq;
|
||||
nextfreq = 0; // Next job use the same timer
|
||||
adcStartConversionI(&ADCD1, &acg, pj->buffer, pj->todo);
|
||||
}
|
||||
|
||||
void gadc_lld_adc_nontimerI(GadcLldNonTimerData *pgntd) {
|
||||
/**
|
||||
* We don't need to calculate num_channels because the AT91SAM7 ADC does this for us.
|
||||
*/
|
||||
acg.channelselects = pgntd->physdev;
|
||||
void gadc_lld_nontimerjobI(GadcNonTimerJob *pj) {
|
||||
acg.channelselects = pj->physdev;
|
||||
acg.trigger = ADC_TRIGGER_SOFTWARE;
|
||||
adcStartConversionI(&ADCD1, &acg, pgntd->buffer, 1);
|
||||
adcStartConversionI(&ADCD1, &acg, pj->buffer, 1);
|
||||
}
|
||||
|
||||
#endif /* GFX_USE_GADC */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -35,18 +35,13 @@
|
|||
* @note For the AT91SAM7 ADC driver, it post-dates the finding of the bug so we safely
|
||||
* say that the bug doesn't exist for this driver.
|
||||
*/
|
||||
#define ADC_ISR_FULL_CODE_BUG FALSE
|
||||
#define CHIBIOS_ADC_ISR_FULL_CODE_BUG FALSE
|
||||
|
||||
/**
|
||||
* @brief The maximum sample frequency supported by this CPU
|
||||
*/
|
||||
#define GADC_MAX_SAMPLE_FREQUENCY 132000
|
||||
|
||||
/**
|
||||
* @brief The number of bits in a sample
|
||||
*/
|
||||
#define GADC_BITS_PER_SAMPLE AT91_ADC1_RESOLUTION
|
||||
|
||||
/**
|
||||
* @brief The sample format
|
||||
*/
|
||||
|
|
|
|||
|
|
@ -5,14 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gaudio/Win32/gaudio_play_config.h
|
||||
* @brief GAUDIO Play Driver config file.
|
||||
*
|
||||
* @addtogroup GAUDIO
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef GAUDIO_PLAY_CONFIG_H
|
||||
#define GAUDIO_PLAY_CONFIG_H
|
||||
|
||||
|
|
@ -22,42 +14,16 @@
|
|||
/* Driver hardware support. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief The maximum sample frequency supported by this audio device
|
||||
*/
|
||||
#define GAUDIO_PLAY_MAX_SAMPLE_FREQUENCY 44100
|
||||
|
||||
/**
|
||||
* @brief The number of audio formats supported by this driver
|
||||
*/
|
||||
#define GAUDIO_PLAY_NUM_FORMATS 2
|
||||
|
||||
/**
|
||||
* @brief The available audio sample formats in order of preference
|
||||
*/
|
||||
#define GAUDIO_PLAY_FORMAT1 ARRAY_DATA_16BITSIGNED
|
||||
#define GAUDIO_PLAY_FORMAT2 ARRAY_DATA_8BITUNSIGNED
|
||||
|
||||
/**
|
||||
* @brief The number of audio channels supported by this driver
|
||||
*/
|
||||
#define GAUDIO_PLAY_NUM_CHANNELS 2
|
||||
|
||||
/**
|
||||
* @brief Whether each channel is mono or stereo
|
||||
*/
|
||||
#define GAUDIO_PLAY_CHANNEL0_IS_STEREO FALSE
|
||||
#define GAUDIO_PLAY_CHANNEL1_IS_STEREO TRUE
|
||||
|
||||
/**
|
||||
* @brief The list of audio channel names and their uses
|
||||
* @{
|
||||
*/
|
||||
#define GAUDIO_PLAY_MONO 0
|
||||
#define GAUDIO_PLAY_STEREO 1
|
||||
/** @} */
|
||||
|
||||
#endif /* GFX_USE_GAUDIO && GAUDIO_NEED_PLAY */
|
||||
|
||||
#endif /* GAUDIO_PLAY_CONFIG_H */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -5,11 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gaudio/Win32/gaudio_play_lld.c
|
||||
* @brief GAUDIO - Play Driver file for Win32.
|
||||
*/
|
||||
|
||||
#include "gfx.h"
|
||||
|
||||
#if GFX_USE_GAUDIO && GAUDIO_NEED_PLAY
|
||||
|
|
@ -47,7 +42,7 @@ static DWORD threadID;
|
|||
*************************************************************************/
|
||||
|
||||
static bool_t senddata(WAVEHDR *pwh) {
|
||||
GAudioData *paud;
|
||||
GDataBuffer *paud;
|
||||
|
||||
// Get the next data block to send
|
||||
gfxSystemLock();
|
||||
|
|
@ -94,7 +89,7 @@ static DWORD WINAPI waveProc(LPVOID arg) {
|
|||
|
||||
// Give the buffer back to the Audio Free List
|
||||
gfxSystemLock();
|
||||
gaudioPlayReleaseDataBlockI((GAudioData *)pwh->dwUser);
|
||||
gaudioPlayReleaseDataBlockI((GDataBuffer *)pwh->dwUser);
|
||||
gfxSystemUnlock();
|
||||
pwh->lpData = 0;
|
||||
nQueuedBuffers--;
|
||||
|
|
|
|||
|
|
@ -5,14 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gaudio/Win32/gaudio_record_config.h
|
||||
* @brief GAUDIO Record Driver config file.
|
||||
*
|
||||
* @addtogroup GAUDIO
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef GAUDIO_RECORD_CONFIG_H
|
||||
#define GAUDIO_RECORD_CONFIG_H
|
||||
|
||||
|
|
@ -22,42 +14,16 @@
|
|||
/* Driver hardware support. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief The maximum sample frequency supported by this audio device
|
||||
*/
|
||||
#define GAUDIO_RECORD_MAX_SAMPLE_FREQUENCY 44100
|
||||
|
||||
/**
|
||||
* @brief The number of audio formats supported by this driver
|
||||
*/
|
||||
#define GAUDIO_RECORD_NUM_FORMATS 2
|
||||
|
||||
/**
|
||||
* @brief The available audio sample formats in order of preference
|
||||
*/
|
||||
#define GAUDIO_RECORD_FORMAT1 ARRAY_DATA_16BITSIGNED
|
||||
#define GAUDIO_RECORD_FORMAT2 ARRAY_DATA_8BITUNSIGNED
|
||||
|
||||
/**
|
||||
* @brief The number of audio channels supported by this driver
|
||||
*/
|
||||
#define GAUDIO_RECORD_NUM_CHANNELS 2
|
||||
|
||||
/**
|
||||
* @brief Whether each channel is mono or stereo
|
||||
*/
|
||||
#define GAUDIO_RECORD_CHANNEL0_IS_STEREO FALSE
|
||||
#define GAUDIO_RECORD_CHANNEL1_IS_STEREO TRUE
|
||||
|
||||
/**
|
||||
* @brief The list of audio channels and their uses
|
||||
* @{
|
||||
*/
|
||||
#define GAUDIO_RECORD_MONO 0
|
||||
#define GAUDIO_RECORD_STEREO 1
|
||||
/** @} */
|
||||
|
||||
#endif /* GFX_USE_GAUDIO && GAUDIO_NEED_RECORD */
|
||||
|
||||
#endif /* GAUDIO_RECORD_CONFIG_H */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -5,11 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gaudio/Win32/gaudio_record_lld.c
|
||||
* @brief GAUDIO - Record Driver file for Win32.
|
||||
*/
|
||||
|
||||
#include "gfx.h"
|
||||
|
||||
#if GFX_USE_GAUDIO && GAUDIO_NEED_RECORD
|
||||
|
|
@ -47,7 +42,7 @@ static DWORD threadID;
|
|||
*************************************************************************/
|
||||
|
||||
static bool_t getbuffer(WAVEHDR *pwh) {
|
||||
GAudioData *paud;
|
||||
GDataBuffer *paud;
|
||||
|
||||
// Get the next data block to send
|
||||
gfxSystemLock();
|
||||
|
|
@ -81,7 +76,7 @@ static bool_t getbuffer(WAVEHDR *pwh) {
|
|||
static DWORD WINAPI waveProc(LPVOID arg) {
|
||||
MSG msg;
|
||||
WAVEHDR *pwh;
|
||||
GAudioData *paud;
|
||||
GDataBuffer *paud;
|
||||
(void) arg;
|
||||
|
||||
while (GetMessage(&msg, 0, 0, 0)) {
|
||||
|
|
@ -93,7 +88,7 @@ static DWORD WINAPI waveProc(LPVOID arg) {
|
|||
waveInUnprepareHeader(ah, pwh, sizeof(WAVEHDR));
|
||||
|
||||
// Save the buffer in the audio record list
|
||||
paud = (GAudioData *)pwh->dwUser;
|
||||
paud = (GDataBuffer *)pwh->dwUser;
|
||||
paud->len = pwh->dwBytesRecorded;
|
||||
gfxSystemLock();
|
||||
gaudioRecordSaveDataBlockI(paud);
|
||||
|
|
|
|||
|
|
@ -3,3 +3,7 @@ GFXSRC += $(GFXLIB)/drivers/gaudio/gadc/gaudio_record_lld.c
|
|||
|
||||
# Required include directories
|
||||
GFXINC += $(GFXLIB)/drivers/gaudio/gadc
|
||||
|
||||
# Make sure the GADC sub-system is turned on
|
||||
GFXDEFS += -DGFX_USE_GADC=GAUDIO_NEED_RECORD
|
||||
|
||||
|
|
|
|||
|
|
@ -5,14 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gaudio/gadc/gaudio_record_board_template.h
|
||||
* @brief GAUDIO Record Driver board config board file
|
||||
*
|
||||
* @addtogroup GAUDIO
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _GAUDIO_RECORD_BOARD_H
|
||||
#define _GAUDIO_RECORD_BOARD_H
|
||||
|
||||
|
|
@ -20,31 +12,16 @@
|
|||
/* Audio inputs on this board */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief The number of audio channels supported by this driver
|
||||
* @note This is an example
|
||||
*/
|
||||
#define GAUDIO_RECORD_NUM_CHANNELS 1
|
||||
|
||||
/**
|
||||
* @brief The list of audio channels and their uses
|
||||
* @note This is an example
|
||||
* @{
|
||||
*/
|
||||
#define GAUDIO_RECORD_MICROPHONE 0
|
||||
/** @} */
|
||||
#define GAUDIO_RECORD_CHANNEL0_IS_STEREO FALSE
|
||||
|
||||
#define GAUDIO_RECORD_MICROPHONE 0
|
||||
|
||||
/**
|
||||
* @brief The audio channel to GADC physical device assignment
|
||||
* @note This is an example
|
||||
* @{
|
||||
*/
|
||||
#ifdef GAUDIO_RECORD_LLD_IMPLEMENTATION
|
||||
static uint32_t gaudin_lld_physdevs[GAUDIO_RECORD_NUM_CHANNELS] = {
|
||||
static uint32_t gaudio_gadc_physdevs[GAUDIO_RECORD_NUM_CHANNELS] = {
|
||||
GADC_PHYSDEV_MICROPHONE,
|
||||
};
|
||||
#endif
|
||||
/** @} */
|
||||
|
||||
#endif /* _GAUDIO_RECORD_BOARD_H */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -5,14 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gaudio/gadc/gaudio_record_config.h
|
||||
* @brief GAUDIN Record Driver config file.
|
||||
*
|
||||
* @addtogroup GAUDIO
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef GAUDIO_RECORD_CONFIG_H
|
||||
#define GAUDIO_RECORD_CONFIG_H
|
||||
|
||||
|
|
@ -22,38 +14,13 @@
|
|||
/* Driver hardware support. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief The audio record sample type
|
||||
* @details For this driver it matches the cpu sample type
|
||||
*/
|
||||
typedef adcsample_t audio_record_sample_t;
|
||||
#define GAUDIO_RECORD_MAX_SAMPLE_FREQUENCY GADC_MAX_HIGH_SPEED_SAMPLERATE
|
||||
#define GAUDIO_RECORD_NUM_FORMATS 1
|
||||
#define GAUDIO_RECORD_FORMAT1 GADC_SAMPLE_FORMAT
|
||||
|
||||
/**
|
||||
* @brief The maximum sample frequency supported by this audio device
|
||||
* @details For this driver it matches the GADC maximum high speed sample rate
|
||||
*/
|
||||
#define GAUDIO_RECORD_MAX_SAMPLE_FREQUENCY GADC_MAX_HIGH_SPEED_SAMPLERATE
|
||||
|
||||
/**
|
||||
* @brief The number of bits in a sample
|
||||
* @details For this driver it matches the cpu sample bits
|
||||
*/
|
||||
#define GAUDIO_RECORD_BITS_PER_SAMPLE GADC_BITS_PER_SAMPLE
|
||||
|
||||
/**
|
||||
* @brief The format of an audio sample
|
||||
* @details For this driver it matches the cpu sample format
|
||||
*/
|
||||
#define GAUDIO_RECORD_SAMPLE_FORMAT GADC_SAMPLE_FORMAT
|
||||
|
||||
/**
|
||||
* For the GAUDIO driver that uses GADC - all the remaining config definitions are specific
|
||||
* to the board.
|
||||
*/
|
||||
/* Include the user supplied board definitions */
|
||||
#include "gaudio_record_board.h"
|
||||
|
||||
#endif /* GFX_USE_GAUDIO && GAUDIO_NEED_RECORD */
|
||||
|
||||
#endif /* GAUDIO_RECORD_CONFIG_H */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -5,22 +5,7 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gaudio/gadc/gaudio_record_lld.c
|
||||
* @brief GAUDIO - Record Driver file for using the cpu ADC (via GADC).
|
||||
*
|
||||
* @addtogroup GAUDIO
|
||||
*
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* We are now implementing the driver - pull in our channel table
|
||||
* from the board definitions.
|
||||
*/
|
||||
#define GAUDIO_RECORD_IMPLEMENTATION
|
||||
|
||||
|
||||
#include "gfx.h"
|
||||
|
||||
#if GFX_USE_GAUDIO && GAUDIO_NEED_RECORD
|
||||
|
|
@ -33,30 +18,38 @@
|
|||
/* Include the driver defines */
|
||||
#include "src/gaudio/driver_record.h"
|
||||
|
||||
static void gadcCallbackI(void) {
|
||||
GDataBuffer *pd;
|
||||
|
||||
pd = gadcHighSpeedGetDataI();
|
||||
if (pd)
|
||||
gaudioRecordSaveDataBlockI(pd);
|
||||
}
|
||||
|
||||
/*===========================================================================*/
|
||||
/* External declarations. */
|
||||
/*===========================================================================*/
|
||||
|
||||
void gaudin_lld_init(const gaudin_params *paud) {
|
||||
bool_t gaudio_record_lld_init(uint16_t channel, uint32_t frequency, ArrayDataFormat format) {
|
||||
/* Check the parameters */
|
||||
if (channel >= GAUDIO_RECORD_NUM_CHANNELS || frequency > GAUDIO_RECORD_MAX_SAMPLE_FREQUENCY || format != GAUDIO_RECORD_FORMAT1)
|
||||
return FALSE;
|
||||
|
||||
/* Setup the high speed GADC */
|
||||
gadcHighSpeedInit(gaudin_lld_physdevs[paud->channel], paud->frequency, paud->buffer, paud->bufcount, paud->samplesPerEvent);
|
||||
gadcHighSpeedInit(gaudio_gadc_physdevs[channel], frequency);
|
||||
|
||||
/* Register ourselves for ISR callbacks */
|
||||
gadcHighSpeedSetISRCallback(GAUDIN_ISR_CompleteI);
|
||||
gadcHighSpeedSetISRCallback(gadcCallbackI);
|
||||
|
||||
/**
|
||||
* The gadc driver handles any errors for us by restarting the transaction so there is
|
||||
* no need for us to setup anything for GAUDIN_ISR_ErrorI()
|
||||
*/
|
||||
return TRUE;
|
||||
}
|
||||
|
||||
void gaudin_lld_start(void) {
|
||||
void gaudio_record_lld_start(void) {
|
||||
gadcHighSpeedStart();
|
||||
}
|
||||
|
||||
void gaudin_lld_stop(void) {
|
||||
void gaudio_record_lld_stop(void) {
|
||||
gadcHighSpeedStop();
|
||||
}
|
||||
|
||||
#endif /* GFX_USE_GAUDIO && GAUDIO_NEED_RECORD */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -0,0 +1,5 @@
|
|||
# List the required driver.
|
||||
GFXSRC += $(GFXLIB)/drivers/gaudio/pwm/gaudio_play_lld.c
|
||||
|
||||
# Required include directories
|
||||
GFXINC += $(GFXLIB)/drivers/gaudio/pwm
|
||||
|
|
@ -0,0 +1,38 @@
|
|||
/*
|
||||
* This file is subject to the terms of the GFX License. If a copy of
|
||||
* the license was not distributed with this file, you can obtain one at:
|
||||
*
|
||||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
#ifndef GAUDIO_PLAY_BOARD_H
|
||||
#define GAUDIO_PLAY_BOARD_H
|
||||
|
||||
/*
|
||||
* This routine is defined in the driver - the timer interrupt should call this routine.
|
||||
*
|
||||
* static void gaudio_play_pwm_timer_callbackI(void);
|
||||
*
|
||||
*/
|
||||
|
||||
static bool gaudio_play_pwm_setup(uint32_t frequency, ArrayDataFormat format) {
|
||||
/* Initialise the PWM - use a midpoint value for the initial PWM value */
|
||||
/* Initialise the timer interrupt @ frequency */
|
||||
/* Return FALSE if any parameter invalid */
|
||||
}
|
||||
|
||||
static void gaudio_play_pwm_start(void) {
|
||||
/* Start the PWM */
|
||||
/* Start the timer interrupt */
|
||||
}
|
||||
|
||||
static void gaudio_play_pwm_stop(void) {
|
||||
/* Stop the timer interrupt */
|
||||
/* Stop the PWM */
|
||||
}
|
||||
|
||||
static void gaudio_play_pwm_setI(uint16_t value) {
|
||||
/* Set the PWM value */
|
||||
}
|
||||
|
||||
#endif /* GAUDIO_PLAY_BOARD_H */
|
||||
|
|
@ -0,0 +1,34 @@
|
|||
/*
|
||||
* This file is subject to the terms of the GFX License. If a copy of
|
||||
* the license was not distributed with this file, you can obtain one at:
|
||||
*
|
||||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
#ifndef GAUDIO_PLAY_CONFIG_H
|
||||
#define GAUDIO_PLAY_CONFIG_H
|
||||
|
||||
#if GFX_USE_GAUDIO && GAUDIO_NEED_PLAY
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver hardware support. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/* These may need to change for your hardware. If so copy this file to your
|
||||
* project directory and then alter it.
|
||||
* The maximum sample frequency should be less than
|
||||
* Max PWM Clock / (2 ^ Bits per sample)
|
||||
* eg. For the AT91SAM7 max PWM clock = 48MHz / 2
|
||||
* For 10 bit PWM accuracy that means GAUDIO_PLAY_MAX_SAMPLE_FREQUENCY = 23,437 Hz
|
||||
*/
|
||||
#define GAUDIO_PLAY_MAX_SAMPLE_FREQUENCY 22000
|
||||
#define GAUDIO_PLAY_NUM_FORMATS 2
|
||||
#define GAUDIO_PLAY_FORMAT1 ARRAY_DATA_10BITUNSIGNED
|
||||
#define GAUDIO_PLAY_FORMAT2 ARRAY_DATA_8BITUNSIGNED
|
||||
#define GAUDIO_PLAY_NUM_CHANNELS 1
|
||||
#define GAUDIO_PLAY_CHANNEL0_IS_STEREO FALSE
|
||||
#define GAUDIO_PLAY_MONO 0
|
||||
|
||||
#endif /* GFX_USE_GAUDIO && GAUDIO_NEED_PLAY */
|
||||
|
||||
#endif /* GAUDIO_PLAY_CONFIG_H */
|
||||
|
|
@ -0,0 +1,117 @@
|
|||
/*
|
||||
* This file is subject to the terms of the GFX License. If a copy of
|
||||
* the license was not distributed with this file, you can obtain one at:
|
||||
*
|
||||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
#include "gfx.h"
|
||||
|
||||
#if GFX_USE_GAUDIO && GAUDIO_NEED_PLAY
|
||||
|
||||
/* Include the driver defines */
|
||||
#include "src/gaudio/driver_play.h"
|
||||
|
||||
/* Forward definition */
|
||||
static void gaudio_play_pwm_timer_callbackI(void);
|
||||
|
||||
/* Include the board interface */
|
||||
#include "gaudio_play_board.h"
|
||||
|
||||
static GDataBuffer *pplay;
|
||||
static ArrayDataFormat playfmt;
|
||||
static size_t playlen;
|
||||
static uint8_t *pdata;
|
||||
|
||||
static void gaudio_play_pwm_timer_callbackI(void) {
|
||||
if (pplay) {
|
||||
|
||||
// Get the next value from the current data buffer
|
||||
if (gfxSampleFormatBits(playfmt) > 8) {
|
||||
gaudio_play_pwm_setI(*(uint16_t *)pdata);
|
||||
pdata += 2;
|
||||
} else {
|
||||
gaudio_play_pwm_setI(*pdata);
|
||||
pdata++;
|
||||
}
|
||||
|
||||
// Are we done yet
|
||||
if (--playlen)
|
||||
return;
|
||||
gaudioPlayReleaseDataBlockI(pplay);
|
||||
|
||||
// Get a new data buffer
|
||||
if (!(pplay = gaudioPlayGetDataBlockI())) {
|
||||
// All is done
|
||||
gaudioPlayDoneI();
|
||||
return;
|
||||
}
|
||||
|
||||
} else {
|
||||
// Get a new data buffer
|
||||
if (!(pplay = gaudioPlayGetDataBlockI()))
|
||||
return;
|
||||
}
|
||||
|
||||
// Set up ready for the new buffer
|
||||
playlen = pplay->len;
|
||||
if (gfxSampleFormatBits(playfmt) > 8)
|
||||
playlen >>= 1;
|
||||
pdata = (uint8_t *)(pplay+1);
|
||||
}
|
||||
|
||||
|
||||
/*===========================================================================*/
|
||||
/* External declarations. */
|
||||
/*===========================================================================*/
|
||||
|
||||
bool_t gaudio_play_lld_init(uint16_t channel, uint32_t frequency, ArrayDataFormat format) {
|
||||
(void) channel;
|
||||
|
||||
if (format != ARRAY_DATA_8BITUNSIGNED && format != ARRAY_DATA_10BITUNSIGNED)
|
||||
return FALSE;
|
||||
|
||||
playfmt = format;
|
||||
return gaudio_play_pwm_setup(frequency, format);
|
||||
}
|
||||
|
||||
bool_t gaudio_play_lld_set_volume(uint8_t vol) {
|
||||
(void) vol;
|
||||
return FALSE;
|
||||
}
|
||||
|
||||
void gaudio_play_lld_start(void) {
|
||||
|
||||
gfxSystemLock();
|
||||
// Get a new data buffer
|
||||
if (pplay || !(pplay = gaudioPlayGetDataBlockI())) {
|
||||
gfxSystemUnlock(); // Nothing to do
|
||||
return;
|
||||
}
|
||||
|
||||
// Set up ready for the new buffer
|
||||
playlen = pplay->len;
|
||||
if (gfxSampleFormatBits(playfmt) > 8)
|
||||
playlen >>= 1;
|
||||
pdata = (uint8_t *)(pplay+1);
|
||||
gfxSystemUnlock();
|
||||
|
||||
// Start the playing
|
||||
gaudio_play_pwm_start();
|
||||
}
|
||||
|
||||
void gaudio_play_lld_stop(void) {
|
||||
// Stop everything
|
||||
gaudio_play_pwm_stop();
|
||||
|
||||
// We may need to clean up the remaining buffer.
|
||||
gfxSystemLock();
|
||||
if (pplay) {
|
||||
gaudioPlayReleaseDataBlockI(pplay);
|
||||
pplay = 0;
|
||||
gaudioPlayDoneI();
|
||||
}
|
||||
gfxSystemUnlock();
|
||||
}
|
||||
|
||||
#endif /* GFX_USE_GAUDIO && GAUDIO_NEED_PLAY */
|
||||
|
|
@ -0,0 +1,12 @@
|
|||
This driver uses a PWM output and a timer to implement an audio play channel.
|
||||
|
||||
Whilst the default config settings will probably work for your hardware, you may need to change them.
|
||||
If so copy gaudio_play_config.h to your project directory and then alter it.
|
||||
|
||||
The maximum sample frequency is governed primarily by the number of bits of resolution and the
|
||||
maximum PWM clock rate. The maximum sample frequency should be less than...
|
||||
|
||||
Max PWM Clock / (2 ^ Bits per sample)
|
||||
|
||||
eg. For the AT91SAM7 max PWM clock = 48MHz / 2
|
||||
For 10 bit PWM accuracy that means GAUDIO_PLAY_MAX_SAMPLE_FREQUENCY = 23,437 Hz
|
||||
|
|
@ -5,18 +5,10 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/ST7565/board_ST7565_template.h
|
||||
* @brief GDISP Graphic Driver subsystem board interface for the ST7565 display.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_BOARD_H
|
||||
#define _GDISP_LLD_BOARD_H
|
||||
|
||||
/**
|
||||
/*
|
||||
* @brief Optional parameters that can be put in this file.
|
||||
* @note The values listed below are the defaults.
|
||||
*
|
||||
|
|
@ -54,149 +46,67 @@
|
|||
* #define EINK_WRITECOUNT 4
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Initialise the board for the display.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @note Set the g->board member to whatever is appropriate. For multiple
|
||||
* displays this might be a pointer to the appropriate register set.
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Delay for display waveforms. Should be an accurate microsecond delay.
|
||||
*
|
||||
* @param[in] us The number of microseconds
|
||||
*/
|
||||
static void eink_delay(int us) {
|
||||
(void) us;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Turn the E-ink panel Vdd supply (+3.3V) on or off.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] on On or off
|
||||
*/
|
||||
static inline void setpower_vdd(GDisplay *g, bool_t on) {
|
||||
(void) g;
|
||||
(void) on;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Turn the E-ink panel negative supplies (-15V, -20V) on or off.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] on On or off
|
||||
*/
|
||||
static inline void setpower_vneg(GDisplay *g, bool_t on) {
|
||||
(void) g;
|
||||
(void) on;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Turn the E-ink panel positive supplies (-15V, -20V) on or off.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] on On or off
|
||||
*/
|
||||
static inline void setpower_vpos(GDisplay *g, bool_t on) {
|
||||
(void) g;
|
||||
(void) on;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the state of the LE (source driver Latch Enable) pin.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] on On or off
|
||||
*/
|
||||
static inline void setpin_le(GDisplay *g, bool_t on) {
|
||||
(void) g;
|
||||
(void) on;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the state of the OE (source driver Output Enable) pin.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] on On or off
|
||||
*/
|
||||
static inline void setpin_oe(GDisplay *g, bool_t on) {
|
||||
(void) g;
|
||||
(void) on;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the state of the CL (source driver Clock) pin.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] on On or off
|
||||
*/
|
||||
static inline void setpin_cl(GDisplay *g, bool_t on) {
|
||||
(void) g;
|
||||
(void) on;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the state of the SPH (source driver Start Pulse Horizontal) pin.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] on On or off
|
||||
*/
|
||||
static inline void setpin_sph(GDisplay *g, bool_t on) {
|
||||
(void) g;
|
||||
(void) on;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the state of the D0-D7 (source driver Data) pins.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] value The byte to write
|
||||
*/
|
||||
static inline void setpins_data(GDisplay *g, uint8_t value) {
|
||||
(void) g;
|
||||
(void) value;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the state of the CKV (gate driver Clock Vertical) pin.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] on On or off
|
||||
*/
|
||||
static inline void setpin_ckv(GDisplay *g, bool_t on) {
|
||||
(void) g;
|
||||
(void) on;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the state of the GMODE (gate driver Gate Mode) pin.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] on On or off
|
||||
*/
|
||||
static inline void setpin_gmode(GDisplay *g, bool_t on) {
|
||||
(void) g;
|
||||
(void) on;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the state of the SPV (gate driver Start Pulse Vertical) pin.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] on On or off
|
||||
*/
|
||||
static inline void setpin_spv(GDisplay *g, bool_t on) {
|
||||
(void) g;
|
||||
(void) on;
|
||||
}
|
||||
|
||||
#endif /* _GDISP_LLD_BOARD_H */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -5,11 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/ED060SC4/gdisp_lld.c
|
||||
* @brief GDISP Graphics Driver for the E-ink panel ED060SC4.
|
||||
*/
|
||||
|
||||
#include "gfx.h"
|
||||
|
||||
#if GFX_USE_GDISP
|
||||
|
|
@ -83,7 +78,7 @@
|
|||
|
||||
#define PRIV(g) ((drvPriv *)g->priv)
|
||||
|
||||
/** Delay between signal changes, to give time for IO pins to change state. */
|
||||
/* Delay between signal changes, to give time for IO pins to change state. */
|
||||
static inline void clockdelay(void)
|
||||
{
|
||||
#if EINK_CLOCKDELAY & 1
|
||||
|
|
@ -111,7 +106,7 @@ static inline void clockdelay(void)
|
|||
#endif
|
||||
}
|
||||
|
||||
/** Fast vertical clock pulse for gate driver, used during initializations */
|
||||
/* Fast vertical clock pulse for gate driver, used during initializations */
|
||||
static void vclock_quick(GDisplay *g)
|
||||
{
|
||||
setpin_ckv(g, TRUE);
|
||||
|
|
@ -120,7 +115,7 @@ static void vclock_quick(GDisplay *g)
|
|||
eink_delay(4);
|
||||
}
|
||||
|
||||
/** Horizontal clock pulse for clocking data into source driver */
|
||||
/* Horizontal clock pulse for clocking data into source driver */
|
||||
static void hclock(GDisplay *g)
|
||||
{
|
||||
clockdelay();
|
||||
|
|
@ -129,7 +124,7 @@ static void hclock(GDisplay *g)
|
|||
setpin_cl(g, FALSE);
|
||||
}
|
||||
|
||||
/** Start a new vertical gate driver scan from top.
|
||||
/* Start a new vertical gate driver scan from top.
|
||||
* Note: Does not clear any previous bits in the shift register,
|
||||
* so you should always scan through the whole display before
|
||||
* starting a new scan.
|
||||
|
|
@ -144,7 +139,7 @@ static void vscan_start(GDisplay *g)
|
|||
vclock_quick(g);
|
||||
}
|
||||
|
||||
/** Waveform for strobing a row of data onto the display.
|
||||
/* Waveform for strobing a row of data onto the display.
|
||||
* Attempts to minimize the leaking of color to other rows by having
|
||||
* a long idle period after a medium-length strobe period.
|
||||
*/
|
||||
|
|
@ -158,7 +153,7 @@ static void vscan_write(GDisplay *g)
|
|||
eink_delay(200);
|
||||
}
|
||||
|
||||
/** Waveform used when clearing the display. Strobes a row of data to the
|
||||
/* Waveform used when clearing the display. Strobes a row of data to the
|
||||
* screen, but does not mind some of it leaking to other rows.
|
||||
*/
|
||||
static void vscan_bulkwrite(GDisplay *g)
|
||||
|
|
@ -169,7 +164,7 @@ static void vscan_bulkwrite(GDisplay *g)
|
|||
eink_delay(200);
|
||||
}
|
||||
|
||||
/** Waveform for skipping a vertical row without writing anything.
|
||||
/* Waveform for skipping a vertical row without writing anything.
|
||||
* Attempts to minimize the amount of change in any row.
|
||||
*/
|
||||
static void vscan_skip(GDisplay *g)
|
||||
|
|
@ -180,7 +175,7 @@ static void vscan_skip(GDisplay *g)
|
|||
eink_delay(100);
|
||||
}
|
||||
|
||||
/** Stop the vertical scan. The significance of this escapes me, but it seems
|
||||
/* Stop the vertical scan. The significance of this escapes me, but it seems
|
||||
* necessary or the next vertical scan may be corrupted.
|
||||
*/
|
||||
static void vscan_stop(GDisplay *g)
|
||||
|
|
@ -193,7 +188,7 @@ static void vscan_stop(GDisplay *g)
|
|||
vclock_quick(g);
|
||||
}
|
||||
|
||||
/** Start updating the source driver data (from left to right). */
|
||||
/* Start updating the source driver data (from left to right). */
|
||||
static void hscan_start(GDisplay *g)
|
||||
{
|
||||
/* Disable latching and output enable while we are modifying the row. */
|
||||
|
|
@ -204,7 +199,7 @@ static void hscan_start(GDisplay *g)
|
|||
setpin_sph(g, FALSE);
|
||||
}
|
||||
|
||||
/** Write data to the horizontal row. */
|
||||
/* Write data to the horizontal row. */
|
||||
static void hscan_write(GDisplay *g, const uint8_t *data, int count)
|
||||
{
|
||||
while (count--)
|
||||
|
|
@ -217,7 +212,7 @@ static void hscan_write(GDisplay *g, const uint8_t *data, int count)
|
|||
}
|
||||
}
|
||||
|
||||
/** Finish and transfer the row to the source drivers.
|
||||
/* Finish and transfer the row to the source drivers.
|
||||
* Does not set the output enable, so the drivers are not yet active. */
|
||||
static void hscan_stop(GDisplay *g)
|
||||
{
|
||||
|
|
@ -231,7 +226,7 @@ static void hscan_stop(GDisplay *g)
|
|||
setpin_le(g, FALSE);
|
||||
}
|
||||
|
||||
/** Turn on the power to the E-Ink panel, observing proper power sequencing. */
|
||||
/* Turn on the power to the E-Ink panel, observing proper power sequencing. */
|
||||
static void power_on(GDisplay *g)
|
||||
{
|
||||
unsigned i;
|
||||
|
|
@ -264,7 +259,7 @@ static void power_on(GDisplay *g)
|
|||
vscan_stop(g);
|
||||
}
|
||||
|
||||
/** Turn off the power, observing proper power sequencing. */
|
||||
/* Turn off the power, observing proper power sequencing. */
|
||||
static void power_off(GDisplay *g)
|
||||
{
|
||||
/* First the high voltages */
|
||||
|
|
@ -289,7 +284,7 @@ static void power_off(GDisplay *g)
|
|||
/* ====================================
|
||||
* Framebuffer emulation layer
|
||||
* ==================================== */
|
||||
|
||||
|
||||
#if EINK_PPB == 4
|
||||
#define PIXELMASK 3
|
||||
#define PIXEL_WHITE 2
|
||||
|
|
@ -336,7 +331,7 @@ typedef struct drvPriv {
|
|||
uint8_t g_blockmap[BLOCKS_Y][BLOCKS_X];
|
||||
} drvPriv;
|
||||
|
||||
/** Check if the row contains any allocated blocks. */
|
||||
/* Check if the row contains any allocated blocks. */
|
||||
static bool_t blocks_on_row(GDisplay *g, unsigned by)
|
||||
{
|
||||
unsigned bx;
|
||||
|
|
@ -350,7 +345,7 @@ static bool_t blocks_on_row(GDisplay *g, unsigned by)
|
|||
return FALSE;
|
||||
}
|
||||
|
||||
/** Write out a block row. */
|
||||
/* Write out a block row. */
|
||||
static void write_block_row(GDisplay *g, unsigned by)
|
||||
{
|
||||
unsigned bx, dy, dx;
|
||||
|
|
@ -379,7 +374,7 @@ static void write_block_row(GDisplay *g, unsigned by)
|
|||
}
|
||||
}
|
||||
|
||||
/** Clear the block map, i.e. deallocate all blocks */
|
||||
/* Clear the block map, i.e. deallocate all blocks */
|
||||
static void clear_block_map(GDisplay *g)
|
||||
{
|
||||
unsigned bx, by;
|
||||
|
|
@ -394,7 +389,7 @@ static void clear_block_map(GDisplay *g)
|
|||
PRIV(g)->g_next_block = 0;
|
||||
}
|
||||
|
||||
/** Initialize a newly allocated block. */
|
||||
/* Initialize a newly allocated block. */
|
||||
static void zero_block(block_t *block)
|
||||
{
|
||||
unsigned dx, dy;
|
||||
|
|
@ -407,7 +402,7 @@ static void zero_block(block_t *block)
|
|||
}
|
||||
}
|
||||
|
||||
/** Allocate a buffer
|
||||
/* Allocate a buffer
|
||||
* Automatically flushes if all buffers are full. */
|
||||
static block_t *alloc_buffer(GDisplay *g, unsigned bx, unsigned by)
|
||||
{
|
||||
|
|
|
|||
|
|
@ -5,14 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/HX8347D/HX8347D.h
|
||||
* @brief GDISP Graphic Driver support header for the HX8347D display.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _HX8347D_H
|
||||
#define _HX8347D_H
|
||||
|
||||
|
|
@ -140,4 +132,3 @@
|
|||
#define HX8347D_REG_PGSEL 0xff /* Page select */
|
||||
|
||||
#endif /* _HX8347D_H */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -5,152 +5,56 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/HX8347D/board_HX8347D_template.h
|
||||
* @brief GDISP Graphic Driver subsystem board SPI interface for the HX8347D display.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_BOARD_H
|
||||
#define _GDISP_LLD_BOARD_H
|
||||
|
||||
/**
|
||||
* @brief Initialise the board for the display.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @note Set the g->board member to whatever is appropriate. For multiple
|
||||
* displays this might be a pointer to the appropriate register set.
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief After the initialisation.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void post_init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set or clear the lcd reset pin.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] state TRUE = lcd in reset, FALSE = normal operation
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setpin_reset(GDisplay *g, bool_t state) {
|
||||
(void) g;
|
||||
(void) state;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the lcd back-light level.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] percent 0 to 100%
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void set_backlight(GDisplay *g, uint8_t percent) {
|
||||
(void) g;
|
||||
(void) percent;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Take exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void acquire_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Release exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void release_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the bus in 16 bit mode
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void busmode16(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the bus in 8 bit mode (the default)
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void busmode8(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the index register.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] index The index register to set
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_index(GDisplay *g, uint8_t index) {
|
||||
(void) g;
|
||||
(void) index;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send 8 bits of data to the lcd.
|
||||
* @pre The bus is in 8 bit mode
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] data The data to send
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_data(GDisplay *g, uint8_t data) {
|
||||
(void) g;
|
||||
(void) data;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send 16 bits of data to the lcd.
|
||||
* @pre The bus is in 16 bit mode
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] data The data to send
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_ram16(GDisplay *g, uint16_t data) {
|
||||
(void) g;
|
||||
(void) data;
|
||||
}
|
||||
|
||||
#endif /* _GDISP_LLD_BOARD_H */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -5,11 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/HX8347D/gdisp_lld.c
|
||||
* @brief GDISP Graphics Driver subsystem low level driver source for the HX8347D display.
|
||||
*/
|
||||
|
||||
#include "gfx.h"
|
||||
|
||||
#if GFX_USE_GDISP
|
||||
|
|
|
|||
|
|
@ -5,14 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/HX8347D/gdisp_lld_config.h
|
||||
* @brief GDISP Graphic Driver subsystem low level driver header for the HX8347D display.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_CONFIG_H
|
||||
#define _GDISP_LLD_CONFIG_H
|
||||
|
||||
|
|
@ -30,4 +22,3 @@
|
|||
#endif /* GFX_USE_GDISP */
|
||||
|
||||
#endif /* _GDISP_LLD_CONFIG_H */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -5,153 +5,56 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/ILI9320/board_ILI9320_template.h
|
||||
* @brief GDISP Graphic Driver subsystem board interface for the ILI9320 display.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef GDISP_LLD_BOARD_H
|
||||
#define GDISP_LLD_BOARD_H
|
||||
|
||||
/**
|
||||
* @brief Initialise the board for the display.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @note Set the g->board member to whatever is appropriate. For multiple
|
||||
* displays this might be a pointer to the appropriate register set.
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief After the initialisation.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void post_init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set or clear the lcd reset pin.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] state TRUE = lcd in reset, FALSE = normal operation
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setpin_reset(GDisplay *g, bool_t state) {
|
||||
(void) g;
|
||||
(void) state;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the lcd back-light level.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] percent 0 to 100%
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void set_backlight(GDisplay *g, uint8_t percent) {
|
||||
(void) g;
|
||||
(void) percent;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Take exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void acquire_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Release exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void release_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the index register.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] index The index register to set
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_index(GDisplay *g, uint16_t index) {
|
||||
(void) g;
|
||||
(void) index;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the lcd.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] data The data to send
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_data(GDisplay *g, uint16_t data) {
|
||||
(void) g;
|
||||
(void) data;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the bus in read mode
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setreadmode(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the bus back into write mode
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setwritemode(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Read data from the lcd.
|
||||
* @return The data from the lcd
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @note The chip select may need to be asserted/de-asserted
|
||||
* around the actual spi read
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline uint16_t read_data(GDisplay *g) {
|
||||
(void) g;
|
||||
return 0;
|
||||
}
|
||||
|
||||
#endif /* GDISP_LLD_BOARD_H */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -5,11 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/ILI9320/gdisp_lld.c
|
||||
* @brief GDISP Graphics Driver subsystem low level driver source for the ILI9320 display.
|
||||
*/
|
||||
|
||||
#include "gfx.h"
|
||||
|
||||
#if GFX_USE_GDISP
|
||||
|
|
@ -330,7 +325,7 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
|
|||
|
||||
case GDISP_ROTATE_90:
|
||||
acquire_bus(g);
|
||||
write_reg(g, 0x01, 0x0100);
|
||||
write_reg(g, 0x01, 0x0000);
|
||||
write_reg(g, 0x03, 0x1030);
|
||||
write_reg(g, 0x60, 0x2700);
|
||||
release_bus(g);
|
||||
|
|
@ -352,7 +347,7 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
|
|||
|
||||
case GDISP_ROTATE_270:
|
||||
acquire_bus(g);
|
||||
write_reg(g, 0x01, 0x0000);
|
||||
write_reg(g, 0x01, 0x0100);
|
||||
write_reg(g, 0x03, 0x1038);
|
||||
write_reg(g, 0x60, 0xA700);
|
||||
release_bus(g);
|
||||
|
|
|
|||
|
|
@ -5,14 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/ILI9320/gdisp_lld_config.h
|
||||
* @brief GDISP Graphic Driver subsystem low level driver header for the ILI9320 display.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef GDISP_LLD_CONFIG_H
|
||||
#define GDISP_LLD_CONFIG_H
|
||||
|
||||
|
|
@ -32,5 +24,3 @@
|
|||
#endif /* GFX_USE_GDISP */
|
||||
|
||||
#endif /* _GDISP_LLD_CONFIG_H */
|
||||
/** @} */
|
||||
|
||||
|
|
|
|||
|
|
@ -5,151 +5,56 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/ILI9325/board_ILI9325_template.h
|
||||
* @brief GDISP Graphic Driver subsystem board interface for the ILI9325 display.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef GDISP_LLD_BOARD_H
|
||||
#define GDISP_LLD_BOARD_H
|
||||
|
||||
/**
|
||||
* @brief Initialise the board for the display.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @note Set the g->board member to whatever is appropriate. For multiple
|
||||
* displays this might be a pointer to the appropriate register set.
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief After the initialisation.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void post_init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set or clear the lcd reset pin.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] state TRUE = lcd in reset, FALSE = normal operation
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setpin_reset(GDisplay *g, bool_t state) {
|
||||
(void) g;
|
||||
(void) state;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the lcd back-light level.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] percent 0 to 100%
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void set_backlight(GDisplay *g, uint8_t percent) {
|
||||
(void) g;
|
||||
(void) percent;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Take exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void acquire_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Release exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void release_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the index register.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] index The index register to set
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_index(GDisplay *g, uint16_t index) {
|
||||
(void) g;
|
||||
(void) index;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the lcd.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] data The data to send
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_data(GDisplay *g, uint16_t data) {
|
||||
(void) g;
|
||||
(void) data;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the bus in read mode
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setreadmode(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the bus back into write mode
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setwritemode(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Read data from the lcd.
|
||||
* @return The data from the lcd
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline uint16_t read_data(GDisplay *g) {
|
||||
(void) g;
|
||||
return 0;
|
||||
}
|
||||
|
||||
#endif /* GDISP_LLD_BOARD_H */
|
||||
/** @} */
|
||||
|
||||
|
|
|
|||
|
|
@ -5,11 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/ILI9325/gdisp_lld.c
|
||||
* @brief GDISP Graphics Driver subsystem low level driver source for the ILI9325 display.
|
||||
*/
|
||||
|
||||
#include "gfx.h"
|
||||
|
||||
#if GFX_USE_GDISP /*|| defined(__DOXYGEN__)*/
|
||||
|
|
|
|||
|
|
@ -5,14 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/ILI9325/gdisp_lld_config.h
|
||||
* @brief GDISP Graphic Driver subsystem low level driver header for the ILI9325 display.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef GDISP_LLD_CONFIG_H
|
||||
#define GDISP_LLD_CONFIG_H
|
||||
|
||||
|
|
@ -32,5 +24,3 @@
|
|||
#endif /* GFX_USE_GDISP */
|
||||
|
||||
#endif /* _GDISP_LLD_CONFIG_H */
|
||||
/** @} */
|
||||
|
||||
|
|
|
|||
|
|
@ -5,150 +5,56 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/ILI9341/board_ILI9341_template.h
|
||||
* @brief GDISP Graphic Driver subsystem board interface for the ILI9341 display.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_BOARD_H
|
||||
#define _GDISP_LLD_BOARD_H
|
||||
|
||||
/**
|
||||
* @brief Initialise the board for the display.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @note Set the g->board member to whatever is appropriate. For multiple
|
||||
* displays this might be a pointer to the appropriate register set.
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief After the initialisation.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void post_init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set or clear the lcd reset pin.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] state TRUE = lcd in reset, FALSE = normal operation
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setpin_reset(GDisplay *g, bool_t state) {
|
||||
(void) g;
|
||||
(void) state;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the lcd back-light level.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] percent 0 to 100%
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void set_backlight(GDisplay *g, uint8_t percent) {
|
||||
(void) g;
|
||||
(void) percent;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Take exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void acquire_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Release exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void release_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the index register.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] index The index register to set
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_index(GDisplay *g, uint16_t index) {
|
||||
(void) g;
|
||||
(void) index;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the lcd.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] data The data to send
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_data(GDisplay *g, uint16_t data) {
|
||||
(void) g;
|
||||
(void) data;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the bus in read mode
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setreadmode(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the bus back into write mode
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setwritemode(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Read data from the lcd.
|
||||
* @return The data from the lcd
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline uint16_t read_data(GDisplay *g) {
|
||||
(void) g;
|
||||
return 0;
|
||||
}
|
||||
|
||||
#endif /* _GDISP_LLD_BOARD_H */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -5,12 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/ILI9341/gdisp_lld.c
|
||||
* @brief GDISP Graphics Driver subsystem low level driver source for
|
||||
* the ILI9341 and compatible HVGA display
|
||||
*/
|
||||
|
||||
#include "gfx.h"
|
||||
|
||||
#if GFX_USE_GDISP
|
||||
|
|
|
|||
|
|
@ -5,15 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/ILI9481/gdisp_lld_config.h
|
||||
* @brief GDISP Graphics Driver subsystem low level driver source for
|
||||
* the ILI9481 and compatible HVGA display
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_CONFIG_H
|
||||
#define _GDISP_LLD_CONFIG_H
|
||||
|
||||
|
|
@ -32,4 +23,3 @@
|
|||
#endif /* GFX_USE_GDISP */
|
||||
|
||||
#endif /* _GDISP_LLD_CONFIG_H */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -5,151 +5,56 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/ILI9481/board_ILI9481_template.h
|
||||
* @brief GDISP Graphics Driver subsystem low level driver source for
|
||||
* the ILI9481 and compatible HVGA display
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_BOARD_H
|
||||
#define _GDISP_LLD_BOARD_H
|
||||
|
||||
/**
|
||||
* @brief Initialise the board for the display.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @note Set the g->board member to whatever is appropriate. For multiple
|
||||
* displays this might be a pointer to the appropriate register set.
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief After the initialisation.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void post_init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set or clear the lcd reset pin.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] state TRUE = lcd in reset, FALSE = normal operation
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setpin_reset(GDisplay *g, bool_t state) {
|
||||
(void) g;
|
||||
(void) state;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the lcd back-light level.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] percent 0 to 100%
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void set_backlight(GDisplay *g, uint8_t percent) {
|
||||
(void) g;
|
||||
(void) percent;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Take exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void acquire_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Release exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void release_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the index register.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] index The index register to set
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_index(GDisplay *g, uint16_t index) {
|
||||
(void) g;
|
||||
(void) index;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the lcd.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] data The data to send
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_data(GDisplay *g, uint16_t data) {
|
||||
(void) g;
|
||||
(void) data;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the bus in read mode
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setreadmode(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the bus back into write mode
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setwritemode(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Read data from the lcd.
|
||||
* @return The data from the lcd
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline uint16_t read_data(GDisplay *g) {
|
||||
(void) g;
|
||||
return 0;
|
||||
}
|
||||
|
||||
#endif /* _GDISP_LLD_BOARD_H */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -5,12 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/ILI9481/gdisp_lld.c
|
||||
* @brief GDISP Graphics Driver subsystem low level driver source for
|
||||
* the ILI9481 and compatible HVGA display
|
||||
*/
|
||||
|
||||
#include "gfx.h"
|
||||
|
||||
#if GFX_USE_GDISP
|
||||
|
|
@ -325,4 +319,3 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
|
|||
#endif
|
||||
|
||||
#endif /* GFX_USE_GDISP */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -5,15 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/ILI9481/gdisp_lld_config.h
|
||||
* @brief GDISP Graphics Driver subsystem low level driver source for
|
||||
* the ILI9481 and compatible HVGA display
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_CONFIG_H
|
||||
#define _GDISP_LLD_CONFIG_H
|
||||
|
||||
|
|
@ -32,4 +23,3 @@
|
|||
#endif /* GFX_USE_GDISP */
|
||||
|
||||
#endif /* _GDISP_LLD_CONFIG_H */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -0,0 +1,71 @@
|
|||
/*
|
||||
* This file is subject to the terms of the GFX License. If a copy of
|
||||
* the license was not distributed with this file, you can obtain one at:
|
||||
*
|
||||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
#ifndef GDISP_LLD_BOARD_H
|
||||
#define GDISP_LLD_BOARD_H
|
||||
|
||||
static inline void init_board(GDisplay *g)
|
||||
{
|
||||
(void) g;
|
||||
}
|
||||
|
||||
static inline void post_init_board(GDisplay *g)
|
||||
{
|
||||
(void) g;
|
||||
}
|
||||
|
||||
static inline void setpin_reset(GDisplay *g, bool_t state)
|
||||
{
|
||||
(void) g;
|
||||
(void) state;
|
||||
}
|
||||
|
||||
static inline void set_backlight(GDisplay *g, uint8_t percent)
|
||||
{
|
||||
(void) g;
|
||||
(void) percent;
|
||||
}
|
||||
|
||||
static inline void acquire_bus(GDisplay *g)
|
||||
{
|
||||
(void) g;
|
||||
}
|
||||
|
||||
static inline void release_bus(GDisplay *g)
|
||||
{
|
||||
(void) g;
|
||||
}
|
||||
|
||||
static inline void write_index(GDisplay *g, uint16_t index)
|
||||
{
|
||||
(void) g;
|
||||
(void) index;
|
||||
}
|
||||
|
||||
static inline void write_data(GDisplay *g, uint16_t data)
|
||||
{
|
||||
(void) g;
|
||||
(void) data;
|
||||
}
|
||||
|
||||
static inline void setreadmode(GDisplay *g)
|
||||
{
|
||||
(void) g;
|
||||
}
|
||||
|
||||
static inline void setwritemode(GDisplay *g)
|
||||
{
|
||||
(void) g;
|
||||
}
|
||||
|
||||
static inline uint16_t read_data(GDisplay *g)
|
||||
{
|
||||
(void) g;
|
||||
return 0;
|
||||
}
|
||||
|
||||
#endif /* GDISP_LLD_BOARD_H */
|
||||
|
|
@ -0,0 +1,2 @@
|
|||
GFXINC += $(GFXLIB)/drivers/gdisp/LGD4532
|
||||
GFXSRC += $(GFXLIB)/drivers/gdisp/LGD4532/gdisp_lld_LGD4532.c
|
||||
|
|
@ -0,0 +1,359 @@
|
|||
/*
|
||||
* This file is subject to the terms of the GFX License. If a copy of
|
||||
* the license was not distributed with this file, you can obtain one at:
|
||||
*
|
||||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
#include "gfx.h"
|
||||
|
||||
#if GFX_USE_GDISP
|
||||
|
||||
/* This controller is only ever used with a 240 x 320 display */
|
||||
#if defined(GDISP_SCREEN_HEIGHT)
|
||||
#warning "GDISP: This low level driver does not support setting a screen size. It is being ignored."
|
||||
#undef GDISP_SCREEN_HEIGHT
|
||||
#endif
|
||||
#if defined(GDISP_SCREEN_WIDTH)
|
||||
#warning "GDISP: This low level driver does not support setting a screen size. It is being ignored."
|
||||
#undef GDISP_SCREEN_WIDTH
|
||||
#endif
|
||||
|
||||
#define GDISP_DRIVER_VMT GDISPVMT_LGD4532
|
||||
#include "gdisp_lld_config.h"
|
||||
#include "src/gdisp/driver.h"
|
||||
|
||||
#include "board_LGD4532.h"
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver local definitions. */
|
||||
/*===========================================================================*/
|
||||
|
||||
#ifndef GDISP_SCREEN_HEIGHT
|
||||
#define GDISP_SCREEN_HEIGHT 320
|
||||
#endif
|
||||
#ifndef GDISP_SCREEN_WIDTH
|
||||
#define GDISP_SCREEN_WIDTH 240
|
||||
#endif
|
||||
#ifndef GDISP_INITIAL_CONTRAST
|
||||
#define GDISP_INITIAL_CONTRAST 50
|
||||
#endif
|
||||
#ifndef GDISP_INITIAL_BACKLIGHT
|
||||
#define GDISP_INITIAL_BACKLIGHT 100
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver local variables. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver local functions. */
|
||||
/*===========================================================================*/
|
||||
|
||||
// Some common routines and macros
|
||||
#define dummy_read(g) { volatile uint16_t dummy; dummy = read_data(g); (void) dummy; }
|
||||
#define write_reg(g, reg, data) { write_index(g, reg); write_data(g, data); }
|
||||
|
||||
static void set_cursor(GDisplay *g) {
|
||||
switch(g->g.Orientation) {
|
||||
default:
|
||||
case GDISP_ROTATE_0:
|
||||
case GDISP_ROTATE_180:
|
||||
write_reg(g, 0x20, g->p.x);
|
||||
write_reg(g, 0x21, g->p.y);
|
||||
break;
|
||||
|
||||
case GDISP_ROTATE_90:
|
||||
case GDISP_ROTATE_270:
|
||||
write_reg(g, 0x20, g->p.y);
|
||||
write_reg(g, 0x21, g->p.x);
|
||||
break;
|
||||
}
|
||||
write_index(g, 0x22);
|
||||
}
|
||||
|
||||
static void set_viewport(GDisplay* g) {
|
||||
switch(g->g.Orientation) {
|
||||
default:
|
||||
case GDISP_ROTATE_0:
|
||||
case GDISP_ROTATE_180:
|
||||
write_reg(g, 0x50, g->p.x);
|
||||
write_reg(g, 0x51, g->p.x + g->p.cx - 1);
|
||||
write_reg(g, 0x52, g->p.y);
|
||||
write_reg(g, 0x53, g->p.y + g->p.cy - 1);
|
||||
break;
|
||||
|
||||
case GDISP_ROTATE_90:
|
||||
case GDISP_ROTATE_270:
|
||||
write_reg(g, 0x50, g->p.y);
|
||||
write_reg(g, 0x51, g->p.y + g->p.cy - 1);
|
||||
write_reg(g, 0x52, g->p.x);
|
||||
write_reg(g, 0x53, g->p.x + g->p.cx - 1);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
|
||||
// No private area for this controller
|
||||
g->priv = 0;
|
||||
|
||||
// Initialise the board interface
|
||||
init_board(g);
|
||||
|
||||
/* Hardware reset */
|
||||
setpin_reset(g, TRUE);
|
||||
gfxSleepMilliseconds(1);
|
||||
setpin_reset(g, FALSE);
|
||||
gfxSleepMilliseconds(2);
|
||||
|
||||
acquire_bus(g);
|
||||
setwritemode(g);
|
||||
|
||||
// chinese code starts here
|
||||
//############# void Power_Set(void) ################//
|
||||
write_reg(g, 0x00, 0x0001);
|
||||
gfxSleepMilliseconds(10);
|
||||
|
||||
write_reg(g, 0x15, 0x0030);
|
||||
write_reg(g, 0x11, 0x0040);
|
||||
write_reg(g, 0x10, 0x1628);
|
||||
write_reg(g, 0x12, 0x0000);
|
||||
write_reg(g, 0x13, 0x104d);
|
||||
gfxSleepMilliseconds(10);
|
||||
write_reg(g, 0x12, 0x0010);
|
||||
gfxSleepMilliseconds(10);
|
||||
write_reg(g, 0x10, 0x2620);
|
||||
write_reg(g, 0x13, 0x344d); //304d
|
||||
gfxSleepMilliseconds(10);
|
||||
|
||||
write_reg(g, 0x01, 0x0100);
|
||||
write_reg(g, 0x02, 0x0300);
|
||||
write_reg(g, 0x03, 0x1038);//0x1030
|
||||
write_reg(g, 0x08, 0x0604);
|
||||
write_reg(g, 0x09, 0x0000);
|
||||
write_reg(g, 0x0A, 0x0008);
|
||||
|
||||
write_reg(g, 0x41, 0x0002);
|
||||
write_reg(g, 0x60, 0xA700);
|
||||
write_reg(g, 0x61, 0x0001);
|
||||
write_reg(g, 0x90, 0x0182);
|
||||
write_reg(g, 0x93, 0x0001);
|
||||
write_reg(g, 0xa3, 0x0010);
|
||||
gfxSleepMilliseconds(10);
|
||||
|
||||
//################# void Gamma_Set(void) ####################//
|
||||
write_reg(g, 0x30, 0x0000);
|
||||
write_reg(g, 0x31, 0x0502);
|
||||
write_reg(g, 0x32, 0x0307);
|
||||
write_reg(g, 0x33, 0x0305);
|
||||
write_reg(g, 0x34, 0x0004);
|
||||
write_reg(g, 0x35, 0x0402);
|
||||
write_reg(g, 0x36, 0x0707);
|
||||
write_reg(g, 0x37, 0x0503);
|
||||
write_reg(g, 0x38, 0x1505);
|
||||
write_reg(g, 0x39, 0x1505);
|
||||
gfxSleepMilliseconds(10);
|
||||
|
||||
//################## void Display_ON(void) ####################//
|
||||
write_reg(g, 0x07, 0x0001);
|
||||
gfxSleepMilliseconds(10);
|
||||
write_reg(g, 0x07, 0x0021);
|
||||
write_reg(g, 0x07, 0x0023);
|
||||
gfxSleepMilliseconds(10);
|
||||
write_reg(g, 0x07, 0x0033);
|
||||
gfxSleepMilliseconds(10);
|
||||
write_reg(g, 0x07, 0x0133);
|
||||
// chinese code ends here
|
||||
|
||||
// Finish Init
|
||||
post_init_board(g);
|
||||
|
||||
// Release the bus
|
||||
release_bus(g);
|
||||
|
||||
// Turn on the backlight
|
||||
set_backlight(g, GDISP_INITIAL_BACKLIGHT);
|
||||
|
||||
/* Initialise the GDISP structure */
|
||||
g->g.Width = GDISP_SCREEN_WIDTH;
|
||||
g->g.Height = GDISP_SCREEN_HEIGHT;
|
||||
g->g.Orientation = GDISP_ROTATE_0;
|
||||
g->g.Powermode = powerOn;
|
||||
g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
|
||||
g->g.Contrast = GDISP_INITIAL_CONTRAST;
|
||||
|
||||
return TRUE;
|
||||
}
|
||||
|
||||
#if GDISP_HARDWARE_STREAM_WRITE
|
||||
LLDSPEC void gdisp_lld_write_start(GDisplay *g) {
|
||||
acquire_bus(g);
|
||||
set_viewport(g);
|
||||
}
|
||||
LLDSPEC void gdisp_lld_write_color(GDisplay *g) {
|
||||
write_data(g, gdispColor2Native(g->p.color));
|
||||
}
|
||||
LLDSPEC void gdisp_lld_write_stop(GDisplay *g) {
|
||||
release_bus(g);
|
||||
}
|
||||
LLDSPEC void gdisp_lld_write_pos(GDisplay *g) {
|
||||
set_cursor(g);
|
||||
}
|
||||
#endif
|
||||
|
||||
#if GDISP_HARDWARE_STREAM_READ
|
||||
LLDSPEC void gdisp_lld_read_start(GDisplay *g) {
|
||||
acquire_bus(g);
|
||||
set_viewport(g);
|
||||
set_cursor(g);
|
||||
setreadmode(g);
|
||||
dummy_read(g);
|
||||
}
|
||||
LLDSPEC color_t gdisp_lld_read_color(GDisplay *g) {
|
||||
uint16_t data;
|
||||
|
||||
data = read_data(g);
|
||||
return gdispNative2Color(data);
|
||||
}
|
||||
LLDSPEC void gdisp_lld_read_stop(GDisplay *g) {
|
||||
setwritemode(g);
|
||||
release_bus(g);
|
||||
}
|
||||
#endif
|
||||
|
||||
#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
|
||||
LLDSPEC void gdisp_lld_control(GDisplay *g) {
|
||||
switch(g->p.x) {
|
||||
case GDISP_CONTROL_POWER:
|
||||
if (g->g.Powermode == (powermode_t)g->p.ptr)
|
||||
return;
|
||||
switch((powermode_t)g->p.ptr) {
|
||||
case powerOff:
|
||||
acquire_bus(g);
|
||||
write_reg(g, 0x07, 0x0000);
|
||||
write_reg(g, 0x10, 0x0000);
|
||||
write_reg(g, 0x11, 0x0000);
|
||||
write_reg(g, 0x12, 0x0000);
|
||||
write_reg(g, 0x13, 0x0000);
|
||||
release_bus(g);
|
||||
set_backlight(g, 0);
|
||||
break;
|
||||
|
||||
case powerOn:
|
||||
//*************Power On sequence ******************//
|
||||
acquire_bus(g);
|
||||
write_reg(g, 0x10, 0x0000); /* SAP, BT[3:0], AP, DSTB, SLP, STB */
|
||||
write_reg(g, 0x11, 0x0000); /* DC1[2:0], DC0[2:0], VC[2:0] */
|
||||
write_reg(g, 0x12, 0x0000); /* VREG1OUT voltage */
|
||||
write_reg(g, 0x13, 0x0000); /* VDV[4:0] for VCOM amplitude */
|
||||
gfxSleepMilliseconds(200); /* Dis-charge capacitor power voltage */
|
||||
write_reg(g, 0x10, 0x17B0); /* SAP, BT[3:0], AP, DSTB, SLP, STB */
|
||||
write_reg(g, 0x11, 0x0147); /* DC1[2:0], DC0[2:0], VC[2:0] */
|
||||
gfxSleepMilliseconds(50);
|
||||
write_reg(g, 0x12, 0x013C); /* VREG1OUT voltage */
|
||||
gfxSleepMilliseconds(50);
|
||||
write_reg(g, 0x13, 0x0E00); /* VDV[4:0] for VCOM amplitude */
|
||||
write_reg(g, 0x29, 0x0009); /* VCM[4:0] for VCOMH */
|
||||
gfxSleepMilliseconds(50);
|
||||
write_reg(g, 0x07, 0x0173); /* 262K color and display ON */
|
||||
release_bus(g);
|
||||
set_backlight(g, g->g.Backlight);
|
||||
break;
|
||||
|
||||
case powerSleep:
|
||||
acquire_bus(g);
|
||||
write_reg(g, 0x07, 0x0000); /* display OFF */
|
||||
write_reg(g, 0x10, 0x0000); /* SAP, BT[3:0], APE, AP, DSTB, SLP */
|
||||
write_reg(g, 0x11, 0x0000); /* DC1[2:0], DC0[2:0], VC[2:0] */
|
||||
write_reg(g, 0x12, 0x0000); /* VREG1OUT voltage */
|
||||
write_reg(g, 0x13, 0x0000); /* VDV[4:0] for VCOM amplitude */
|
||||
gfxSleepMilliseconds(200); /* Dis-charge capacitor power voltage */
|
||||
write_reg(g, 0x10, 0x0002); /* SAP, BT[3:0], APE, AP, DSTB, SLP */
|
||||
release_bus(g);
|
||||
set_backlight(g, g->g.Backlight);
|
||||
break;
|
||||
|
||||
case powerDeepSleep:
|
||||
acquire_bus(g);
|
||||
write_reg(g, 0x07, 0x0000); /* display OFF */
|
||||
write_reg(g, 0x10, 0x0000); /* SAP, BT[3:0], APE, AP, DSTB, SLP */
|
||||
write_reg(g, 0x11, 0x0000); /* DC1[2:0], DC0[2:0], VC[2:0] */
|
||||
write_reg(g, 0x12, 0x0000); /* VREG1OUT voltage */
|
||||
write_reg(g, 0x13, 0x0000); /* VDV[4:0] for VCOM amplitude */
|
||||
gfxSleepMilliseconds(200); /* Dis-charge capacitor power voltage */
|
||||
write_reg(g, 0x10, 0x0004); /* SAP, BT[3:0], APE, AP, DSTB, SLP */
|
||||
release_bus(g);
|
||||
set_backlight(g, g->g.Backlight);
|
||||
break;
|
||||
|
||||
default:
|
||||
return;
|
||||
}
|
||||
g->g.Powermode = (powermode_t)g->p.ptr;
|
||||
return;
|
||||
|
||||
case GDISP_CONTROL_ORIENTATION:
|
||||
if (g->g.Orientation == (orientation_t)g->p.ptr)
|
||||
return;
|
||||
switch((orientation_t)g->p.ptr) {
|
||||
case GDISP_ROTATE_0:
|
||||
acquire_bus(g);
|
||||
write_reg(g, 0x01, 0x0100);
|
||||
write_reg(g, 0x03, 0x1030);
|
||||
write_reg(g, 0x60, 0x2700);
|
||||
release_bus(g);
|
||||
g->g.Height = GDISP_SCREEN_HEIGHT;
|
||||
g->g.Width = GDISP_SCREEN_WIDTH;
|
||||
break;
|
||||
|
||||
case GDISP_ROTATE_90:
|
||||
acquire_bus(g);
|
||||
write_reg(g, 0x01, 0x0100);
|
||||
write_reg(g, 0x03, 0x1038);
|
||||
write_reg(g, 0x60, 0xA700);
|
||||
release_bus(g);
|
||||
g->g.Height = GDISP_SCREEN_WIDTH;
|
||||
g->g.Width = GDISP_SCREEN_HEIGHT;
|
||||
break;
|
||||
|
||||
case GDISP_ROTATE_180:
|
||||
acquire_bus(g);
|
||||
write_reg(g, 0x01, 0x0000);
|
||||
write_reg(g, 0x03, 0x1030);
|
||||
write_reg(g, 0x60, 0xa700);
|
||||
release_bus(g);
|
||||
g->g.Height = GDISP_SCREEN_HEIGHT;
|
||||
g->g.Width = GDISP_SCREEN_WIDTH;
|
||||
break;
|
||||
|
||||
case GDISP_ROTATE_270:
|
||||
acquire_bus(g);
|
||||
write_reg(g, 0x01, 0x0000);
|
||||
write_reg(g, 0x03, 0x1038);
|
||||
write_reg(g, 0x60, 0x2700);
|
||||
release_bus(g);
|
||||
g->g.Height = GDISP_SCREEN_WIDTH;
|
||||
g->g.Width = GDISP_SCREEN_HEIGHT;
|
||||
break;
|
||||
|
||||
default:
|
||||
return;
|
||||
}
|
||||
|
||||
g->g.Orientation = (orientation_t)g->p.ptr;
|
||||
return;
|
||||
|
||||
case GDISP_CONTROL_BACKLIGHT:
|
||||
if ((unsigned)g->p.ptr > 100)
|
||||
g->p.ptr = (void *)100;
|
||||
set_backlight(g, (unsigned)g->p.ptr);
|
||||
g->g.Backlight = (unsigned)g->p.ptr;
|
||||
return;
|
||||
|
||||
default:
|
||||
return;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* GFX_USE_GDISP */
|
||||
|
|
@ -0,0 +1,21 @@
|
|||
/*
|
||||
* This file is subject to the terms of the GFX License. If a copy of
|
||||
* the license was not distributed with this file, you can obtain one at:
|
||||
*
|
||||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
#ifndef GDISP_LLD_CONFIG_H
|
||||
#define GDISP_LLD_CONFIG_H
|
||||
|
||||
#if GFX_USE_GDISP
|
||||
|
||||
#define GDISP_HARDWARE_STREAM_WRITE TRUE
|
||||
#define GDISP_HARDWARE_STREAM_READ TRUE
|
||||
#define GDISP_HARDWARE_STREAM_POS TRUE
|
||||
#define GDISP_HARDWARE_CONTROL TRUE
|
||||
|
||||
#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_RGB565
|
||||
|
||||
#endif /* GFX_USE_GDISP */
|
||||
#endif /* _GDISP_LLD_CONFIG_H */
|
||||
|
|
@ -5,14 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/Nokia6610GE12/board_Nokia6610GE12_template.h
|
||||
* @brief GDISP Graphic Driver subsystem board interface for the Nokia6610 GE12 display.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_BOARD_H
|
||||
#define _GDISP_LLD_BOARD_H
|
||||
|
||||
|
|
@ -28,104 +20,40 @@
|
|||
//#define GDISP_INITIAL_CONTRAST 50 // The initial contrast percentage
|
||||
//#define GDISP_INITIAL_BACKLIGHT 100 // The initial backlight percentage
|
||||
|
||||
/**
|
||||
* @brief Initialise the board for the display.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @note Set the g->board member to whatever is appropriate. For multiple
|
||||
* displays this might be a pointer to the appropriate register set.
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief After the initialisation.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void post_init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set or clear the lcd reset pin.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] state TRUE = lcd in reset, FALSE = normal operation
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setpin_reset(GDisplay *g, bool_t state) {
|
||||
(void) g;
|
||||
(void) state;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the lcd back-light level.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] percent 0 to 100%
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void set_backlight(GDisplay *g, uint8_t percent) {
|
||||
(void) g;
|
||||
(void) percent;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Take exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void acquire_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Release exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void release_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the index register.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] index The index register to set
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_index(GDisplay *g, uint16_t index) {
|
||||
(void) g;
|
||||
(void) index;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the lcd.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] data The data to send
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_data(GDisplay *g, uint16_t data) {
|
||||
(void) g;
|
||||
(void) data;
|
||||
}
|
||||
|
||||
#endif /* _GDISP_LLD_BOARD_H */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -5,11 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/Nokia6610GE12/gdisp_lld.c
|
||||
* @brief GDISP Graphics Driver subsystem low level driver source for the Nokia6610 GE12 display.
|
||||
*/
|
||||
|
||||
#include "gfx.h"
|
||||
|
||||
#if GFX_USE_GDISP
|
||||
|
|
|
|||
|
|
@ -5,14 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/Nokia6610GE12/gdisp_lld_config.h
|
||||
* @brief GDISP Graphic Driver subsystem low level driver header for the Nokia6610 GE12 display.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_CONFIG_H
|
||||
#define _GDISP_LLD_CONFIG_H
|
||||
|
||||
|
|
@ -30,4 +22,3 @@
|
|||
#endif /* GFX_USE_GDISP */
|
||||
|
||||
#endif /* _GDISP_LLD_CONFIG_H */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -5,14 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/Nokia6610GE8/board_Nokia6610GE8_template.h
|
||||
* @brief GDISP Graphic Driver subsystem board interface for the Nokia6610 GE12 display.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_BOARD_H
|
||||
#define _GDISP_LLD_BOARD_H
|
||||
|
||||
|
|
@ -28,104 +20,40 @@
|
|||
//#define GDISP_INITIAL_CONTRAST 50 // The initial contrast percentage
|
||||
//#define GDISP_INITIAL_BACKLIGHT 100 // The initial backlight percentage
|
||||
|
||||
/**
|
||||
* @brief Initialise the board for the display.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @note Set the g->board member to whatever is appropriate. For multiple
|
||||
* displays this might be a pointer to the appropriate register set.
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief After the initialisation.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void post_init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set or clear the lcd reset pin.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] state TRUE = lcd in reset, FALSE = normal operation
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setpin_reset(GDisplay *g, bool_t state) {
|
||||
(void) g;
|
||||
(void) state;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the lcd back-light level.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] percent 0 to 100%
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void set_backlight(GDisplay *g, uint8_t percent) {
|
||||
(void) g;
|
||||
(void) percent;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Take exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void acquire_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Release exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void release_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the index register.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] index The index register to set
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_index(GDisplay *g, uint16_t index) {
|
||||
(void) g;
|
||||
(void) index;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the lcd.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] data The data to send
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_data(GDisplay *g, uint16_t data) {
|
||||
(void) g;
|
||||
(void) data;
|
||||
}
|
||||
|
||||
#endif /* _GDISP_LLD_BOARD_H */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -5,19 +5,11 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/Nokia6610GE8/gdisp_lld.c
|
||||
* @brief GDISP Graphics Driver subsystem low level driver source for the Nokia6610 GE8 display.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#include "gfx.h"
|
||||
|
||||
#if GFX_USE_GDISP
|
||||
|
||||
/**
|
||||
/*
|
||||
* This is for the EPSON (GE8) controller driving a Nokia6610 color LCD display.
|
||||
* Note that there is also a PHILIPS (GE12) controller for the same display that this code
|
||||
* does not support.
|
||||
|
|
@ -136,25 +128,55 @@
|
|||
#define write_cmd3(g, cmd, d1, d2, d3) { write_index(g, cmd); write_data3(g, d1, d2, d3); }
|
||||
#define write_cmd4(g, cmd, d1, d2, d3, d4) { write_index(g, cmd); write_data4(g, d1, d2, d3, d4); }
|
||||
|
||||
#if GDISP_HARDWARE_DRAWPIXEL
|
||||
static inline void set_viewpoint(GDisplay* g) {
|
||||
#if GDISP_NOKIA_ORIENTATION && GDISP_NEED_CONTROL
|
||||
switch(g->g.Orientation) {
|
||||
default:
|
||||
case GDISP_ROTATE_0:
|
||||
write_cmd2(g, CASET, GDISP_RAM_X_OFFSET+g->p.x, GDISP_RAM_X_OFFSET+g->p.x); // Column address set
|
||||
write_cmd2(g, PASET, GDISP_RAM_Y_OFFSET+g->p.y, GDISP_RAM_Y_OFFSET+g->p.y); // Page address set
|
||||
break;
|
||||
case GDISP_ROTATE_90:
|
||||
write_cmd2(g, CASET, GDISP_RAM_X_OFFSET+g->p.y, GDISP_RAM_X_OFFSET+g->p.y);
|
||||
write_cmd2(g, PASET, GDISP_RAM_Y_OFFSET-1+g->g.Width-g->p.x, GDISP_RAM_Y_OFFSET-1+g->g.Width-g->p.x);
|
||||
break;
|
||||
case GDISP_ROTATE_180:
|
||||
write_cmd2(g, CASET, GDISP_RAM_X_OFFSET-1+g->g.Width-g->p.x, GDISP_RAM_X_OFFSET-1+g->g.Width-g->p.x);
|
||||
write_cmd2(g, PASET, GDISP_RAM_Y_OFFSET-1+g->g.Height-g->p.y, GDISP_RAM_Y_OFFSET-1+g->g.Height-g->p.y);
|
||||
break;
|
||||
case GDISP_ROTATE_270:
|
||||
write_cmd2(g, CASET, GDISP_RAM_X_OFFSET-1+g->g.Height-g->p.y, GDISP_RAM_X_OFFSET-1+g->g.Height-g->p.y);
|
||||
write_cmd2(g, PASET, GDISP_RAM_Y_OFFSET+g->p.x, GDISP_RAM_Y_OFFSET+g->p.x);
|
||||
break;
|
||||
}
|
||||
#else
|
||||
write_cmd2(g, CASET, GDISP_RAM_X_OFFSET+g->p.x, GDISP_RAM_X_OFFSET+g->p.x); // Column address set
|
||||
write_cmd2(g, PASET, GDISP_RAM_Y_OFFSET+g->p.y, GDISP_RAM_Y_OFFSET+g->p.y); // Page address set
|
||||
#endif
|
||||
write_index(g, RAMWR);
|
||||
}
|
||||
#endif
|
||||
|
||||
static inline void set_viewport(GDisplay* g) {
|
||||
#if GDISP_NOKIA_ORIENTATION && GDISP_NEED_CONTROL
|
||||
switch(g->g.Orientation) {
|
||||
default:
|
||||
case GDISP_ROTATE_0:
|
||||
write_cmd2(g, CASET, GDISP_RAM_X_OFFSET+g->p.x, GDISP_RAM_X_OFFSET+g->p.x); // Column address set
|
||||
write_cmd2(g, PASET, GDISP_RAM_Y_OFFSET+g->p.y, GDISP_RAM_Y_OFFSET+g->p.y); // Page address set
|
||||
write_cmd2(g, CASET, GDISP_RAM_X_OFFSET+g->p.x, GDISP_RAM_X_OFFSET+g->p.x+g->p.cx-1); // Column address set
|
||||
write_cmd2(g, PASET, GDISP_RAM_Y_OFFSET+g->p.y, GDISP_RAM_Y_OFFSET+g->p.y+g->p.cy-1); // Page address set
|
||||
break;
|
||||
case GDISP_ROTATE_90:
|
||||
write_cmd2(g, CASET, GDISP_RAM_X_OFFSET+g->p.y, GDISP_RAM_X_OFFSET+g->p.y);
|
||||
write_cmd2(g, PASET, GDISP_RAM_Y_OFFSET-1+g->g.Width-g->p.x, GDISP_RAM_Y_OFFSET-1+g->g.Width-g->p.x);
|
||||
write_cmd2(g, CASET, GDISP_RAM_X_OFFSET+g->p.y, GDISP_RAM_X_OFFSET+g->p.y+g->p.cy-1);
|
||||
write_cmd2(g, PASET, GDISP_RAM_Y_OFFSET+g->g.Width-g->p.x-g->p.cx, GDISP_RAM_Y_OFFSET-1+g->g.Width-g->p.x);
|
||||
break;
|
||||
case GDISP_ROTATE_180:
|
||||
write_cmd2(g, CASET, GDISP_RAM_X_OFFSET-1+g->g.Width-g->p.x, GDISP_RAM_X_OFFSET-1+g->g.Width-g->p.x);
|
||||
write_cmd2(g, PASET, GDISP_RAM_Y_OFFSET-1+g->g.Height-g->p.y, GDISP_RAM_Y_OFFSET-1+g->g.Height-g->p.y);
|
||||
write_cmd2(g, CASET, GDISP_RAM_X_OFFSET+g->g.Width-g->p.x-g->p.cx, GDISP_RAM_X_OFFSET-1+g->g.Width-g->p.x);
|
||||
write_cmd2(g, PASET, GDISP_RAM_Y_OFFSET+g->g.Height-g->p.y-g->p.cy, GDISP_RAM_Y_OFFSET-1+g->g.Height-g->p.y);
|
||||
break;
|
||||
case GDISP_ROTATE_270:
|
||||
write_cmd2(g, CASET, GDISP_RAM_X_OFFSET-1+g->g.Height-g->p.y, GDISP_RAM_X_OFFSET-1+g->g.Height-g->p.y);
|
||||
write_cmd2(g, PASET, GDISP_RAM_Y_OFFSET+g->p.x, GDISP_RAM_Y_OFFSET+g->p.x);
|
||||
write_cmd2(g, CASET, GDISP_RAM_X_OFFSET+g->g.Height-g->p.y-g->p.cy, GDISP_RAM_X_OFFSET-1+g->g.Height-g->p.y);
|
||||
write_cmd2(g, PASET, GDISP_RAM_Y_OFFSET+g->p.x, GDISP_RAM_Y_OFFSET+g->p.x+g->p.cx-1);
|
||||
break;
|
||||
}
|
||||
#else
|
||||
|
|
@ -292,8 +314,8 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
|
|||
|
||||
c = gdispColor2Native(g->p.color);
|
||||
acquire_bus(g);
|
||||
set_viewport(g);
|
||||
write_data3(g, 0, (c>>8) & 0x0F, c & 0xFF);
|
||||
set_viewpoint(g);
|
||||
write_data3(g, 0, ((c>>8) & 0x0F), (c & 0xFF));
|
||||
release_bus(g);
|
||||
}
|
||||
#endif
|
||||
|
|
@ -569,4 +591,3 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
|
|||
#endif
|
||||
|
||||
#endif /* GFX_USE_GDISP */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -5,14 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/Nokia6610GE8/gdisp_lld_config.h
|
||||
* @brief GDISP Graphic Driver subsystem low level driver header for the Nokia6610 GE8 display.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_CONFIG_H
|
||||
#define _GDISP_LLD_CONFIG_H
|
||||
|
||||
|
|
@ -46,4 +38,3 @@
|
|||
#endif /* GFX_USE_GDISP */
|
||||
|
||||
#endif /* _GDISP_LLD_CONFIG_H */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -5,139 +5,50 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/SSD1963/board_RA8875_template.h
|
||||
* @brief GDISP Graphic Driver subsystem board interface for the RA8875 display.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_BOARD_H
|
||||
#define _GDISP_LLD_BOARD_H
|
||||
|
||||
/**
|
||||
* @brief Initialise the board for the display.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @note Set the g->board member to whatever is appropriate. For multiple
|
||||
* displays this might be a pointer to the appropriate register set.
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief After the initialisation.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void post_init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set or clear the lcd reset pin.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] state TRUE = lcd in reset, FALSE = normal operation
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setpin_reset(GDisplay *g, bool_t state) {
|
||||
(void) g;
|
||||
(void) state;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Take exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void acquire_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Release exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void release_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the index register.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] index The index register to set
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_index(GDisplay *g, uint16_t index) {
|
||||
(void) g;
|
||||
(void) index;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the lcd.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] data The data to send
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_data(GDisplay *g, uint16_t data) {
|
||||
(void) g;
|
||||
(void) data;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the bus in read mode
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setreadmode(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the bus back into write mode
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setwritemode(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Read data from the lcd.
|
||||
* @return The data from the lcd
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @note The chip select may need to be asserted/de-asserted
|
||||
* around the actual spi read
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline uint16_t read_data(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
#endif /* _GDISP_LLD_BOARD_H */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -5,11 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/RA8875/gdisp_lld.c
|
||||
* @brief GDISP Graphics Driver subsystem low level driver source.
|
||||
*/
|
||||
|
||||
#include "gfx.h"
|
||||
|
||||
#if GFX_USE_GDISP /*|| defined(__DOXYGEN__)*/
|
||||
|
|
|
|||
|
|
@ -5,14 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/SSD1963/gdisp_lld_config.h
|
||||
* @brief GDISP Graphic Driver subsystem low level driver header.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_CONFIG_H
|
||||
#define _GDISP_LLD_CONFIG_H
|
||||
|
||||
|
|
@ -32,5 +24,3 @@
|
|||
#endif /* GFX_USE_GDISP */
|
||||
|
||||
#endif /* _GDISP_LLD_CONFIG_H */
|
||||
/** @} */
|
||||
|
||||
|
|
|
|||
|
|
@ -5,150 +5,56 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/S6D1121/board_S6D1121_template.h
|
||||
* @brief GDISP Graphic Driver subsystem board interface for the S6D1121 display.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_BOARD_H
|
||||
#define _GDISP_LLD_BOARD_H
|
||||
|
||||
/**
|
||||
* @brief Initialise the board for the display.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @note Set the g->board member to whatever is appropriate. For multiple
|
||||
* displays this might be a pointer to the appropriate register set.
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief After the initialisation.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void post_init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set or clear the lcd reset pin.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] state TRUE = lcd in reset, FALSE = normal operation
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setpin_reset(GDisplay *g, bool_t state) {
|
||||
(void) g;
|
||||
(void) state;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the lcd back-light level.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] percent 0 to 100%
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void set_backlight(GDisplay *g, uint8_t percent) {
|
||||
(void) g;
|
||||
(void) percent;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Take exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void acquire_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Release exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void release_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the index register.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] index The index register to set
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_index(GDisplay *g, uint16_t index) {
|
||||
(void) g;
|
||||
(void) index;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the lcd.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] data The data to send
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_data(GDisplay *g, uint16_t data) {
|
||||
(void) g;
|
||||
(void) data;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the bus in read mode
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setreadmode(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the bus back into write mode
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setwritemode(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Read data from the lcd.
|
||||
* @return The data from the lcd
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline uint16_t read_data(GDisplay *g) {
|
||||
(void) g;
|
||||
return 0;
|
||||
}
|
||||
|
||||
#endif /* _GDISP_LLD_BOARD_H */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -5,14 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/S6D1121/gdisp_lld.c
|
||||
* @brief GDISP Graphics Driver subsystem low level driver source for the S6d1121 display.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#include "gfx.h"
|
||||
|
||||
#if GFX_USE_GDISP
|
||||
|
|
@ -336,5 +328,3 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
|
|||
#endif
|
||||
|
||||
#endif /* GFX_USE_GDISP */
|
||||
/** @} */
|
||||
|
||||
|
|
|
|||
|
|
@ -5,14 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/S6D1121/gdisp_lld_config.h
|
||||
* @brief GDISP Graphic Driver subsystem low level driver header for the S6D1121 display.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_CONFIG_H
|
||||
#define _GDISP_LLD_CONFIG_H
|
||||
|
||||
|
|
@ -32,5 +24,3 @@
|
|||
#endif /* GFX_USE_GDISP */
|
||||
|
||||
#endif /* _GDISP_LLD_CONFIG_H */
|
||||
/** @} */
|
||||
|
||||
|
|
|
|||
|
|
@ -5,181 +5,67 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/SSD1289/board_SSD1289_template.h
|
||||
* @brief GDISP Graphic Driver subsystem board interface for the SSD1289 display.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_BOARD_H
|
||||
#define _GDISP_LLD_BOARD_H
|
||||
|
||||
/**
|
||||
* @brief Initialise the board for the display.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @note Set the g->board member to whatever is appropriate. For multiple
|
||||
* displays this might be a pointer to the appropriate register set.
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief After the initialisation.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void post_init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set or clear the lcd reset pin.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] state TRUE = lcd in reset, FALSE = normal operation
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setpin_reset(GDisplay *g, bool_t state) {
|
||||
(void) g;
|
||||
(void) state;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the lcd back-light level.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] percent 0 to 100%
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void set_backlight(GDisplay *g, uint8_t percent) {
|
||||
(void) g;
|
||||
(void) percent;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Take exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void acquire_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Release exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void release_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the index register.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] index The index register to set
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_index(GDisplay *g, uint16_t index) {
|
||||
(void) g;
|
||||
(void) index;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the lcd.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] data The data to send
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_data(GDisplay *g, uint16_t data) {
|
||||
(void) g;
|
||||
(void) data;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the bus in read mode
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setreadmode(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the bus back into write mode
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setwritemode(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Read data from the lcd.
|
||||
* @return The data from the lcd
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline uint16_t read_data(GDisplay *g) {
|
||||
(void) g;
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* The below section you can replace with #error if your interface doesn't support DMA
|
||||
*/
|
||||
#if defined(GDISP_USE_DMA) || defined(__DOXYGEN__)
|
||||
//#error "GDISP - SSD1289: This interface does not support DMA"
|
||||
|
||||
/**
|
||||
* @brief Transfer data using DMA but don't increment the source address
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] buffer The source buffer location
|
||||
* @param[in] area The number of pixels to transfer
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void dma_with_noinc(GDisplay *g, color_t *buffer, int area) {
|
||||
(void) g;
|
||||
(void) buffer;
|
||||
(void) area;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Transfer data using DMA incrementing the source address
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] buffer The source buffer location
|
||||
* @param[in] area The number of pixels to transfer
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void dma_with_inc(GDisplay *g, color_t *buffer, int area) {
|
||||
(void) g;
|
||||
(void) buffer;
|
||||
|
|
@ -188,4 +74,3 @@ static inline uint16_t read_data(GDisplay *g) {
|
|||
#endif
|
||||
|
||||
#endif /* _GDISP_LLD_BOARD_H */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -5,11 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/SSD1289/gdisp_lld.c
|
||||
* @brief GDISP Graphics Driver subsystem low level driver source for the SSD1289 display.
|
||||
*/
|
||||
|
||||
#include "gfx.h"
|
||||
|
||||
#if GFX_USE_GDISP
|
||||
|
|
|
|||
|
|
@ -5,14 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/SSD1289/gdisp_lld_config.h
|
||||
* @brief GDISP Graphic Driver subsystem low level driver header for the SSD1289 display.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_CONFIG_H
|
||||
#define _GDISP_LLD_CONFIG_H
|
||||
|
||||
|
|
@ -40,4 +32,3 @@
|
|||
#endif /* GFX_USE_GDISP */
|
||||
|
||||
#endif /* _GDISP_LLD_CONFIG_H */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -53,5 +53,3 @@
|
|||
#define SSD1306_SCROLL_VERTICAL_AND_HORIZONTAL_LEFT 0x2A
|
||||
|
||||
#endif /* _SSD1306_H */
|
||||
/** @} */
|
||||
|
||||
|
|
|
|||
|
|
@ -5,106 +5,37 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/SSD1306/board_SSD1306_template.h
|
||||
* @brief GDISP Graphic Driver subsystem board interface for the SSD1306 display.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_BOARD_H
|
||||
#define _GDISP_LLD_BOARD_H
|
||||
|
||||
/**
|
||||
* @brief Optional: A byte to prefix on each display page line.
|
||||
* @note If not defined then no byte is prefixed on each page line.
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
//#define SSD1306_PAGE_PREFIX 0x40
|
||||
|
||||
/**
|
||||
* @brief Initialise the board for the display.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @note Set the g->board member to whatever is appropriate. For multiple
|
||||
* displays this might be a pointer to the appropriate register set.
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief After the initialisation.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void post_init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set or clear the lcd reset pin.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] state TRUE = lcd in reset, FALSE = normal operation
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setpin_reset(GDisplay *g, bool_t state) {
|
||||
(void) g;
|
||||
(void) state;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Take exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void acquire_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Release exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void release_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send a command to the controller.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] cmd The command to send *
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_cmd(GDisplay *g, uint8_t cmd) {
|
||||
(void) g;
|
||||
(void) cmd;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the lcd.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] data The data to send
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
|
||||
(void) g;
|
||||
(void) data;
|
||||
|
|
@ -112,5 +43,3 @@ static inline void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
|
|||
}
|
||||
|
||||
#endif /* _GDISP_LLD_BOARD_H */
|
||||
/** @} */
|
||||
|
||||
|
|
|
|||
|
|
@ -5,11 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/SSD1306/gdisp_lld.c
|
||||
* @brief GDISP Graphics Driver subsystem low level driver source for the SSD1306 display.
|
||||
*/
|
||||
|
||||
#include "gfx.h"
|
||||
|
||||
#if GFX_USE_GDISP
|
||||
|
|
@ -279,4 +274,3 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
|
|||
#endif // GDISP_NEED_CONTROL
|
||||
|
||||
#endif // GFX_USE_GDISP
|
||||
|
||||
|
|
|
|||
|
|
@ -28,5 +28,3 @@
|
|||
#endif /* GFX_USE_GDISP */
|
||||
|
||||
#endif /* _GDISP_LLD_CONFIG_H */
|
||||
/** @} */
|
||||
|
||||
|
|
|
|||
|
|
@ -5,47 +5,9 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/SSD1963/board_SSD1963_template.h
|
||||
* @brief GDISP Graphic Driver subsystem board interface for the SSD1963 display.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_BOARD_H
|
||||
#define _GDISP_LLD_BOARD_H
|
||||
|
||||
/**
|
||||
* @brief LCD panel specs
|
||||
*
|
||||
* @note The timings need to follow the datasheet for your particular TFT/LCD screen
|
||||
* (the actual screen, not the controller).
|
||||
* @note Datasheets normally use a specific set of timings and acronyms, their value refers
|
||||
* to the number of pixel clocks. Non-display periods refer to pulses/timings that occur
|
||||
* before or after the timings that actually put pixels on the screen. Display periods
|
||||
* refer to pulses/timings that directly put pixels on the screen.
|
||||
* @note HDP: Horizontal Display Period, normally the width - 1<br>
|
||||
* HT: Horizontal Total period (display + non-display)<br>
|
||||
* HPS: non-display period between the start of the horizontal sync (LLINE) signal
|
||||
* and the first display data<br>
|
||||
* LPS: horizontal sync pulse (LLINE) start location in pixel clocks<br>
|
||||
* HPW: Horizontal sync Pulse Width<br>
|
||||
* VDP: Vertical Display period, normally height - 1<br>
|
||||
* VT: Vertical Total period (display + non-display)<br>
|
||||
* VPS: non-display period in lines between the start of the frame and the first display
|
||||
* data in number of lines<br>
|
||||
* FPS: vertical sync pulse (LFRAME) start location in lines.<br>
|
||||
* VPW: Vertical sync Pulse Width
|
||||
* @note Here's how to convert them:<br>
|
||||
* SCREEN_HSYNC_FRONT_PORCH = ( HT - HPS ) - GDISP_SCREEN_WIDTH<br>
|
||||
* SCREEN_HSYNC_PULSE = HPW<br>
|
||||
* SCREEN_HSYNC_BACK_PORCH = HPS - HPW<br>
|
||||
* SCREEN_VSYNC_FRONT_PORCH = ( VT - VPS ) - GDISP_SCREEN_HEIGHT<br>
|
||||
* SCREEN_VSYNC_PULSE = VPW<br>
|
||||
* SCREEN_VSYNC_BACK_PORCH = VPS - LPS<br>
|
||||
*/
|
||||
|
||||
static const LCD_Parameters DisplayTimings[] = {
|
||||
// You need one of these array elements per display
|
||||
{
|
||||
|
|
@ -58,91 +20,35 @@ static const LCD_Parameters DisplayTimings[] = {
|
|||
},
|
||||
};
|
||||
|
||||
/**
|
||||
* @brief Initialise the board for the display.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @note Set the g->board member to whatever is appropriate. For multiple
|
||||
* displays this might be a pointer to the appropriate register set.
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief After the initialisation.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void post_init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set or clear the lcd reset pin.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] state TRUE = lcd in reset, FALSE = normal operation
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setpin_reset(GDisplay *g, bool_t state) {
|
||||
(void) g;
|
||||
(void) state;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Take exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void acquire_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Release exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void release_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the index register.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] index The index register to set
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_index(GDisplay *g, uint16_t index) {
|
||||
(void) g;
|
||||
(void) index;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the lcd.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] data The data to send
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_data(GDisplay *g, uint16_t data) {
|
||||
(void) g;
|
||||
(void) data;
|
||||
}
|
||||
|
||||
#endif /* _GDISP_LLD_BOARD_H */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -5,11 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/SSD1963/gdisp_lld.c
|
||||
* @brief GDISP Graphics Driver subsystem low level driver source.
|
||||
*/
|
||||
|
||||
#include "gfx.h"
|
||||
|
||||
#if GFX_USE_GDISP
|
||||
|
|
@ -282,4 +277,3 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
|
|||
#endif
|
||||
|
||||
#endif /* GFX_USE_GDISP */
|
||||
|
||||
|
|
|
|||
|
|
@ -5,14 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/SSD1963/gdisp_lld_config.h
|
||||
* @brief GDISP Graphic Driver subsystem low level driver header.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_CONFIG_H
|
||||
#define _GDISP_LLD_CONFIG_H
|
||||
|
||||
|
|
@ -30,5 +22,3 @@
|
|||
#endif /* GFX_USE_GDISP */
|
||||
|
||||
#endif /* _GDISP_LLD_CONFIG_H */
|
||||
/** @} */
|
||||
|
||||
|
|
|
|||
|
|
@ -9,7 +9,6 @@
|
|||
#define SSD1963_H
|
||||
|
||||
/* SSD1963 commands */
|
||||
|
||||
#define SSD1963_NOP 0x0000
|
||||
#define SSD1963_SOFT_RESET 0x0001
|
||||
#define SSD1963_GET_POWER_MODE 0x000A
|
||||
|
|
@ -95,4 +94,3 @@
|
|||
#define SSD1963_GET_PIXEL_DATA_INTERFACE 0x00F1
|
||||
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -5,181 +5,67 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/SSD2119/board_SSD2119_template.h
|
||||
* @brief GDISP Graphic Driver subsystem board template for the SSD2119 display.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_BOARD_H
|
||||
#define _GDISP_LLD_BOARD_H
|
||||
|
||||
/**
|
||||
* @brief Initialise the board for the display.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @note Set the g->board member to whatever is appropriate. For multiple
|
||||
* displays this might be a pointer to the appropriate register set.
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief After the initialisation.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void post_init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set or clear the lcd reset pin.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] state TRUE = lcd in reset, FALSE = normal operation
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setpin_reset(GDisplay *g, bool_t state) {
|
||||
(void) g;
|
||||
(void) state;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the lcd back-light level.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] percent 0 to 100%
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void set_backlight(GDisplay *g, uint8_t percent) {
|
||||
(void) g;
|
||||
(void) percent;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Take exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void acquire_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Release exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void release_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the index register.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] index The index register to set
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_index(GDisplay *g, uint16_t index) {
|
||||
(void) g;
|
||||
(void) index;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the lcd.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] data The data to send
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_data(GDisplay *g, uint16_t data) {
|
||||
(void) g;
|
||||
(void) data;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the bus in read mode
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setreadmode(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the bus back into write mode
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setwritemode(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Read data from the lcd.
|
||||
* @return The data from the lcd
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline uint16_t read_data(GDisplay *g) {
|
||||
(void) g;
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* The below section you can replace with #error if your interface doesn't support DMA
|
||||
*/
|
||||
#if defined(GDISP_USE_DMA) || defined(__DOXYGEN__)
|
||||
//#error "GDISP - SSD2119: This interface does not support DMA"
|
||||
|
||||
/**
|
||||
* @brief Transfer data using DMA but don't increment the source address
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] buffer The source buffer location
|
||||
* @param[in] area The number of pixels to transfer
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void dma_with_noinc(GDisplay *g, color_t *buffer, int area) {
|
||||
(void) g;
|
||||
(void) buffer;
|
||||
(void) area;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Transfer data using DMA incrementing the source address
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] buffer The source buffer location
|
||||
* @param[in] area The number of pixels to transfer
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void dma_with_inc(GDisplay *g, color_t *buffer, int area) {
|
||||
(void) g;
|
||||
(void) buffer;
|
||||
|
|
@ -188,4 +74,3 @@ static inline uint16_t read_data(GDisplay *g) {
|
|||
#endif
|
||||
|
||||
#endif /* _GDISP_LLD_BOARD_H */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -5,11 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/SSD2119/gdisp_lld.c
|
||||
* @brief GDISP Graphics Driver subsystem low level driver source for the SSD2119 display.
|
||||
*/
|
||||
|
||||
#include "gfx.h"
|
||||
|
||||
#if GFX_USE_GDISP
|
||||
|
|
|
|||
|
|
@ -5,14 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/SSD2119/gdisp_lld_config.h
|
||||
* @brief GDISP Graphic Driver subsystem low level driver header for the SSD2119 display.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_CONFIG_H
|
||||
#define _GDISP_LLD_CONFIG_H
|
||||
|
||||
|
|
@ -40,4 +32,3 @@
|
|||
#endif /* GFX_USE_GDISP */
|
||||
|
||||
#endif /* _GDISP_LLD_CONFIG_H */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -5,19 +5,10 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/SSD2119/ssd2119.h
|
||||
* @brief GDISP Graphic Driver support header for the SSD2119 display.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _SSD2119_H
|
||||
#define _SSD2119_H
|
||||
|
||||
/* SSD2119 registers */
|
||||
|
||||
#define SSD2119_REG_DEVICE_CODE_READ 0x00
|
||||
#define SSD2119_REG_OSC_START 0x00
|
||||
#define SSD2119_REG_OUTPUT_CTRL 0x01
|
||||
|
|
@ -65,4 +56,3 @@
|
|||
#define SSD2119_REG_Y_RAM_ADDR 0x4F
|
||||
|
||||
#endif /* _SSD2119_H */
|
||||
/** @} */
|
||||
|
|
|
|||
|
|
@ -5,20 +5,9 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/ST7565/board_ST7565_template.h
|
||||
* @brief GDISP Graphic Driver subsystem board interface for the ST7565 display.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_BOARD_H
|
||||
#define _GDISP_LLD_BOARD_H
|
||||
|
||||
/**
|
||||
* Driver configuration
|
||||
*/
|
||||
#define ST7565_LCD_BIAS ST7565_LCD_BIAS_7
|
||||
#define ST7565_ADC ST7565_ADC_NORMAL
|
||||
#define ST7565_COM_SCAN ST7565_COM_SCAN_INC
|
||||
|
|
@ -28,87 +17,32 @@
|
|||
* #define ST7565_PAGE_ORDER 4,5,6,7,0,1,2,3
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Initialise the board for the display.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @note Set the g->board member to whatever is appropriate. For multiple
|
||||
* displays this might be a pointer to the appropriate register set.
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief After the initialisation.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void post_init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set or clear the lcd reset pin.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] state TRUE = lcd in reset, FALSE = normal operation
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setpin_reset(GDisplay *g, bool_t state) {
|
||||
(void) g;
|
||||
(void) state;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Take exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void acquire_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Release exclusive control of the bus
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void release_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send a command to the controller.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] cmd The command to send *
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_cmd(GDisplay *g, uint8_t cmd) {
|
||||
(void) g;
|
||||
(void) cmd;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the lcd.
|
||||
*
|
||||
* @param[in] g The GDisplay structure
|
||||
* @param[in] data The data to send
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
|
||||
(void) g;
|
||||
(void) data;
|
||||
|
|
@ -116,5 +50,3 @@ static inline void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
|
|||
}
|
||||
|
||||
#endif /* _GDISP_LLD_BOARD_H */
|
||||
/** @} */
|
||||
|
||||
|
|
|
|||
|
|
@ -5,11 +5,6 @@
|
|||
* http://ugfx.org/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/ST7565/gdisp_lld.c
|
||||
* @brief GDISP Graphics Driver subsystem low level driver source for the ST7565 display.
|
||||
*/
|
||||
|
||||
#include "gfx.h"
|
||||
|
||||
#if GFX_USE_GDISP
|
||||
|
|
@ -77,7 +72,7 @@
|
|||
/* Driver exported functions. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
/*
|
||||
* As this controller can't update on a pixel boundary we need to maintain the
|
||||
* the entire display surface in memory so that we can do the necessary bit
|
||||
* operations. Fortunately it is a small display in monochrome.
|
||||
|
|
|
|||
|
|
@ -24,5 +24,3 @@
|
|||
#endif /* GFX_USE_GDISP */
|
||||
|
||||
#endif /* _GDISP_LLD_CONFIG_H */
|
||||
/** @} */
|
||||
|
||||
|
|
|
|||
|
|
@ -35,5 +35,3 @@
|
|||
#define ST7565_POWER_CONTROL 0x28
|
||||
|
||||
#endif /* _ST7565_H */
|
||||
/** @} */
|
||||
|
||||
|
|
|
|||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue