removed xxx_unknown.h board files from ginput drivers

ugfx_release_2.6
Joel Bodenmann 2012-11-29 00:45:17 +01:00
parent b1b117bffa
commit de85a1496e
2 changed files with 0 additions and 271 deletions

View File

@ -1,97 +0,0 @@
/*
ChibiOS/GFX - Copyright (C) 2012
Joel Bodenmann aka Tectu <joel@unormal.org>
This file is part of ChibiOS/GFX.
ChibiOS/GFX is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/GFX is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* @file drivers/ginput/touch/ADS7843/ginput_lld_mouse_board_unknown.h
* @brief GINPUT Touch low level driver source for the ADS7843 on some unknown board.
*
* @addtogroup GINPUT_MOUSE
* @{
*/
#ifndef _GINPUT_LLD_MOUSE_BOARD_H
#define _GINPUT_LLD_MOUSE_BOARD_H
/**
* @brief Initialise the board for the touch.
*
* @notapi
*/
static __inline void init_board(void) {
spiStart(TOUCH_SPIDriver, TOUCH_SPIConfig);
}
/**
* @brief Check whether the surface is currently touched
* @return TRUE if the surface is currently touched
*
* @notapi
*/
static __inline bool_t getpin_pressed(void) {
return !palReadPad(TOUCH_PressedPort, TOUCH_PressedPin);
}
/**
* @brief Aquire the bus ready for readings
*
* @notapi
*/
static __inline void aquire_bus(void) {
#if defined(SPI_USE_MUTUAL_EXCLUSION)
spiAcquireBus(TOUCH_SPIDriver);
#endif
GINPUT_TOUCH_SPI_PROLOGUE();
palClearPad(TOUCH_SPIConfig->ssport, TOUCH_SPIConfig->sspad);
}
/**
* @brief Release the bus after readings
*
* @notapi
*/
static __inline void release_bus(void) {
palSetPad(TOUCH_SPIConfig->ssport, TOUCH_SPIConfig->sspad);
GINPUT_TOUCH_SPI_EPILOGUE();
#if defined(SPI_USE_MUTUAL_EXCLUSION)
spiReleaseBus(tsDriver->spip);
#endif
}
/**
* @brief Read a value from touch controller
* @return The value read from the controller
*
* params[in] port The controller port to read.
*
* @notapi
*/
static __inline uint16_t read_value(uint16_t port) {
static uint8_t txbuf[3] = {0};
static uint8_t rxbuf[3] = {0};
txbuf[0] = cmd;
spiExchange(TOUCH_SPIDriver, 3, txbuf, rxbuf);
return (rxbuf[1] << 5) | (rxbuf[2] >> 3);
}
#endif /* _GINPUT_LLD_MOUSE_BOARD_H */
/** @} */

View File

@ -1,174 +0,0 @@
/*
ChibiOS/GFX - Copyright (C) 2012
Joel Bodenmann aka Tectu <joel@unormal.org>
This file is part of ChibiOS/GFX.
ChibiOS/GFX is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/GFX is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* @file drivers/ginput/touch/MCU/ginput_lld_mouse_board_unknown.h
* @brief GINPUT Touch low level driver source for the MCU on some unknown board.
*
* @addtogroup GINPUT_MOUSE
* @{
*/
#ifndef _GINPUT_LLD_MOUSE_BOARD_H
#define _GINPUT_LLD_MOUSE_BOARD_H
#define ADC_NUM_CHANNELS 2
#define ADC_BUF_DEPTH 1
static const ADCConversionGroup adc_y_config = {
FALSE,
ADC_NUM_CHANNELS,
NULL,
NULL,
0, 0,
0, 0,
ADC_SQR1_NUM_CH(ADC_NUM_CHANNELS),
0,
ADC_SQR3_SQ2_N(ADC_CHANNEL_IN12) | ADC_SQR3_SQ1_N(ADC_CHANNEL_IN13)
};
static const ADCConversionGroup adc_x_config = {
FALSE,
ADC_NUM_CHANNELS,
NULL,
NULL,
0, 0,
0, 0,
ADC_SQR1_NUM_CH(ADC_NUM_CHANNELS),
0,
ADC_SQR3_SQ2_N(ADC_CHANNEL_IN10) | ADC_SQR3_SQ1_N(ADC_CHANNEL_IN11)
};
/**
* @brief Initialise the board for the mouse/touch.
*
* @notapi
*/
static __inline void init_board(void) {
/* Code here */
#error "ginputMCU: You must supply a definition for init_board for your board
adcStart(ts->adc_driver, NULL);
}
/**
* @brief Check whether the surface is currently touched
* @return TRUE if the surface is currently touched
*
* @notapi
*/
static __inline bool_t getpin_pressed(void) {
/* Code here */
#error "ginputMCU: You must supply a definition for getpin_pressed for your board"
palSetPadMode(ts->yd_port, ts->yd_pin, PAL_MODE_INPUT_PULLDOWN);
palSetPadMode(ts->yu_port, ts->yu_pin, PAL_MODE_INPUT);
palSetPadMode(ts->xl_port, ts->xl_pin, PAL_MODE_INPUT);
palSetPadMode(ts->xr_port, ts->xr_pin, PAL_MODE_OUTPUT_PUSHPULL);
palSetPad(ts->xr_port, ts->xr_pin);
return palReadPad(ts->yd_port, ts->yd_pin);
}
/**
* @brief Aquire the bus ready for readings
*
* @notapi
*/
static __inline void aquire_bus(void) {
/* Code here */
#error "ginputMCU: You must supply a definition for aquire_bus for your board"
}
/**
* @brief Release the bus after readings
*
* @notapi
*/
static __inline void release_bus(void) {
/* Code here */
#error "ginputMCU: You must supply a definition for release_bus for your board"
}
/**
* @brief Read an x value from touch controller
* @return The value read from the controller
*
* @notapi
*/
static __inline uint16_t read_x_value(void) {
/* Code here */
#error "ginputMCU: You must supply a definition for read_x_value for your board"
uint16_t val1, val2;
adcsample_t samples[ADC_NUM_CHANNELS * ADC_BUF_DEPTH];
palSetPadMode(ts->yd_port, ts->yd_pin, PAL_MODE_INPUT_ANALOG);
palSetPadMode(ts->yu_port, ts->yu_pin, PAL_MODE_INPUT_ANALOG);
palSetPadMode(ts->xl_port, ts->xl_pin, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(ts->xr_port, ts->xr_pin, PAL_MODE_OUTPUT_PUSHPULL);
palSetPad(ts->xl_port, ts->xl_pin);
palClearPad(ts->xr_port, ts->xr_pin);
chThdSleepMilliseconds(1);
adcConvert(ts->adc_driver, &adc_x_config, samples, ADC_BUF_DEPTH);
val1 = ((samples[0] + samples[1])/2);
palClearPad(ts->xl_port, ts->xl_pin);
palSetPad(ts->xr_port, ts->xr_pin);
chThdSleepMilliseconds(1);
adcConvert(ts->adc_driver, &adc_x_config, samples, ADC_BUF_DEPTH);
val2 = ((samples[0] + samples[1])/2);
return ((val1+((1<<12)-val2))/4);
}
/**
* @brief Read an y value from touch controller
* @return The value read from the controller
*
* @notapi
*/
static __inline uint16_t read_y_value(void) {
/* Code here */
#error "ginputMCU: You must supply a definition for read_y_value for your board"
uint16_t val1, val2;
adcsample_t samples[ADC_NUM_CHANNELS * ADC_BUF_DEPTH];
palSetPadMode(ts->xl_port, ts->xl_pin, PAL_MODE_INPUT_ANALOG);
palSetPadMode(ts->xr_port, ts->xr_pin, PAL_MODE_INPUT_ANALOG);
palSetPadMode(ts->yd_port, ts->yd_pin, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(ts->yu_port, ts->yu_pin, PAL_MODE_OUTPUT_PUSHPULL);
palSetPad(ts->yu_port, ts->yu_pin);
palClearPad(ts->yd_port, ts->yd_pin);
chThdSleepMilliseconds(1);
adcConvert(ts->adc_driver, &adc_y_config, samples, ADC_BUF_DEPTH);
val1 = ((samples[0] + samples[1])/2);
palClearPad(ts->yu_port, ts->yu_pin);
palSetPad(ts->yd_port, ts->yd_pin);
chThdSleepMilliseconds(1);
adcConvert(ts->adc_driver, &adc_y_config, samples, ADC_BUF_DEPTH);
val2 = ((samples[0] + samples[1])/2);
return ((val1+((1<<12)-val2))/4);
}
#endif /* _GINPUT_LLD_MOUSE_BOARD_H */
/** @} */