SSD1289 update by user Eddie
This commit is contained in:
Joel Bodenmann
parent
9945b011a9
commit
f14ed21d5d
3 changed files with 820 additions and 568 deletions
File diff suppressed because it is too large
Load diff
172
drivers/gdisp/SSD1289/gdisp_lld_board_st_stm32f4_discovery.h
Normal file
172
drivers/gdisp/SSD1289/gdisp_lld_board_st_stm32f4_discovery.h
Normal file
|
|
@ -0,0 +1,172 @@
|
|||
/*
|
||||
* This file is subject to the terms of the GFX License, v1.0. If a copy of
|
||||
* the license was not distributed with this file, you can obtain one at:
|
||||
*
|
||||
* http://chibios-gfx.com/license.html
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file drivers/gdisp/SSD1289/gdisp_lld_board_example_fsmc.h
|
||||
* @brief GDISP Graphic Driver subsystem board interface for the SSD1289 display.
|
||||
*
|
||||
* @addtogroup GDISP
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _GDISP_LLD_BOARD_H
|
||||
#define _GDISP_LLD_BOARD_H
|
||||
|
||||
#define GDISP_REG ((volatile uint16_t *) 0x60000000)[0] /* RS = 0 */
|
||||
#define GDISP_RAM ((volatile uint16_t *) 0x60020000)[0] /* RS = 1 */
|
||||
|
||||
#define GDISP_USE_FSMC
|
||||
#define GDISP_USE_DMA
|
||||
#define GDISP_DMA_STREAM STM32_DMA2_STREAM6
|
||||
|
||||
const unsigned char FSMC_Bank = 0;
|
||||
|
||||
/* PWM configuration structure. We use timer 3 channel 3 */
|
||||
static const PWMConfig pwmcfg = {
|
||||
100000, /* 100 kHz PWM clock frequency. */
|
||||
100, /* PWM period is 100 cycles. */
|
||||
NULL,
|
||||
{
|
||||
{PWM_OUTPUT_DISABLED, NULL},
|
||||
{PWM_OUTPUT_DISABLED, NULL},
|
||||
{PWM_OUTPUT_ACTIVE_HIGH, NULL},
|
||||
{PWM_OUTPUT_DISABLED, NULL}
|
||||
},
|
||||
0
|
||||
};
|
||||
|
||||
/**
|
||||
* @brief Initialise the board for the display.
|
||||
* @notes Performs the following functions:
|
||||
* 1. initialise the io port used by your display
|
||||
* 2. initialise the reset pin (initial state not-in-reset)
|
||||
* 3. initialise the chip select pin (initial state not-active)
|
||||
* 4. initialise the backlight pin (initial state back-light off)
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void init_board(void) {
|
||||
|
||||
#if defined(STM32F1XX) || defined(STM32F3XX)
|
||||
/* FSMC setup for F1/F3 */
|
||||
rccEnableAHB(RCC_AHBENR_FSMCEN, 0);
|
||||
|
||||
#if defined(GDISP_USE_DMA) && defined(GDISP_DMA_STREAM)
|
||||
#error "DMA not implemented for F1/F3 Devices"
|
||||
#endif
|
||||
#elif defined(STM32F4XX) || defined(STM32F2XX)
|
||||
/* STM32F2-F4 FSMC init */
|
||||
rccEnableAHB3(RCC_AHB3ENR_FSMCEN, 0);
|
||||
|
||||
#if defined(GDISP_USE_DMA) && defined(GDISP_DMA_STREAM)
|
||||
if (dmaStreamAllocate(GDISP_DMA_STREAM, 0, NULL, NULL)) gfxExit();
|
||||
dmaStreamSetMemory0(GDISP_DMA_STREAM, &GDISP_RAM);
|
||||
dmaStreamSetMode(GDISP_DMA_STREAM, STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_DIR_M2M);
|
||||
#endif
|
||||
#else
|
||||
#error "FSMC not implemented for this device"
|
||||
#endif
|
||||
|
||||
/* set pins to FSMC mode */
|
||||
IOBus busD = {GPIOD, (1 << 0) | (1 << 1) | (1 << 4) | (1 << 5) | (1 << 7) | (1 << 8) |
|
||||
(1 << 9) | (1 << 10) | (1 << 11) | (1 << 14) | (1 << 15), 0};
|
||||
|
||||
IOBus busE = {GPIOE, (1 << 7) | (1 << 8) | (1 << 9) | (1 << 10) | (1 << 11) | (1 << 12) |
|
||||
(1 << 13) | (1 << 14) | (1 << 15), 0};
|
||||
|
||||
palSetBusMode(&busD, PAL_MODE_ALTERNATE(12));
|
||||
palSetBusMode(&busE, PAL_MODE_ALTERNATE(12));
|
||||
|
||||
/* FSMC timing */
|
||||
FSMC_Bank1->BTCR[FSMC_Bank+1] = FSMC_BTR1_ADDSET_0 | FSMC_BTR1_DATAST_2 | FSMC_BTR1_BUSTURN_0 ;
|
||||
|
||||
/* Bank1 NOR/SRAM control register configuration
|
||||
* This is actually not needed as already set by default after reset */
|
||||
FSMC_Bank1->BTCR[FSMC_Bank] = FSMC_BCR1_MWID_0 | FSMC_BCR1_WREN | FSMC_BCR1_MBKEN;
|
||||
|
||||
/* Display backlight control */
|
||||
/* TIM3 is an alternate function 2 (AF2) */
|
||||
pwmStart(&PWMD3, &pwmcfg);
|
||||
palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATE(2));
|
||||
pwmEnableChannel(&PWMD3, 2, 100);
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set or clear the lcd reset pin.
|
||||
*
|
||||
* @param[in] state TRUE = lcd in reset, FALSE = normal operation
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void setpin_reset(bool_t state) {
|
||||
(void) state;
|
||||
/* Nothing to do here */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the lcd back-light level.
|
||||
*
|
||||
* @param[in] percent 0 to 100%
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void set_backlight(uint8_t percent) {
|
||||
pwmEnableChannel(&PWMD3, 2, percent);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Take exclusive control of the bus
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void acquire_bus(void) {
|
||||
/* Nothing to do here */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Release exclusive control of the bus
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void release_bus(void) {
|
||||
/* Nothing to do here */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Send data to the index register.
|
||||
*
|
||||
* @param[in] index The index register to set
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_index(uint16_t index) { GDISP_REG = index; }
|
||||
|
||||
/**
|
||||
* @brief Send data to the lcd.
|
||||
*
|
||||
* @param[in] data The data to send
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline void write_data(uint16_t data) { GDISP_RAM = data; }
|
||||
|
||||
#if GDISP_HARDWARE_READPIXEL || GDISP_HARDWARE_SCROLL || defined(__DOXYGEN__)
|
||||
/**
|
||||
* @brief Read data from the lcd.
|
||||
*
|
||||
* @return The data from the lcd
|
||||
* @note The chip select may need to be asserted/de-asserted
|
||||
* around the actual spi read
|
||||
*
|
||||
* @notapi
|
||||
*/
|
||||
static inline uint16_t read_data(void) { return GDISP_RAM; }
|
||||
#endif
|
||||
|
||||
#endif /* _GDISP_LLD_BOARD_H */
|
||||
/** @} */
|
||||
|
|
@ -10,6 +10,7 @@ To use this driver:
|
|||
Use the gdisp_lld_board_example.h or gdisp_lld_board_fsmc.h file as a basis.
|
||||
Currently known boards are:
|
||||
BOARD_FIREBULL_STM32_F103 - GPIO interface: requires GDISP_CMD_PORT and GDISP_DATA_PORT to be defined
|
||||
BOARD_ST_STM32F4_DISCOVERY - FSMC interface
|
||||
|
||||
d) The following are optional - define them if you are not using the defaults below:
|
||||
#define GDISP_SCREEN_WIDTH 320
|
||||
|
|
|
|||
Loading…
Add table
Reference in a new issue