/* ChibiOS/GFX - Copyright (C) 2012 Joel Bodenmann aka Tectu This file is part of ChibiOS/GFX. ChibiOS/GFX is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. ChibiOS/GFX is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ /** * @file drivers/touchpad/XPT2046/touchpad_lld.c * @brief Touchpad Driver subsystem low level driver source. * * @addtogroup TOUCHPAD * @{ */ #include "ch.h" #include "hal.h" #include "touchpad.h" #if GFX_USE_TOUCHPAD /*|| defined(__DOXYGEN__)*/ /*===========================================================================*/ /* Driver local definitions. */ /*===========================================================================*/ /*===========================================================================*/ /* Driver exported variables. */ /*===========================================================================*/ /*===========================================================================*/ /* Driver local variables. */ /*===========================================================================*/ #if !defined(__DOXYGEN__) /* Local copy of the current touchpad driver */ static const TOUCHPADDriver *tpDriver; static uint16_t sampleBuf[7]; #endif /*===========================================================================*/ /* Driver local functions. */ /*===========================================================================*/ /*===========================================================================*/ /* Driver interrupt handlers. */ /*===========================================================================*/ /*===========================================================================*/ /* Driver exported functions. */ /*===========================================================================*/ /* ---- Required Routines ---- */ /** * @brief Low level Touchpad driver initialization. * * @param[in] tp The touchpad driver struct * * @notapi */ void tp_lld_init(const TOUCHPADDriver *tp) { tpDriver = tp; if(tpDriver->direct_init) spiStart(tpDriver->spip, tpDriver->spicfg); } /** * @brief Reads a conversion from the touchpad * * @param[in] cmd The command bits to send to the touchpad * * @return The read value 12-bit right-justified * * @note This function only reads data, it is assumed that the pins are * configured properly and the bus has been acquired beforehand * * @notapi */ uint16_t tp_lld_read_value(uint8_t cmd) { static uint8_t txbuf[3] = {0}; static uint8_t rxbuf[3] = {0}; uint16_t ret; txbuf[0] = cmd; spiExchange(tpDriver->spip, 3, txbuf, rxbuf); ret = (rxbuf[1] << 5) | (rxbuf[2] >> 3); return ret; } /** * @brief 7-point median filtering code for touchpad samples * * @note This is an internally used routine only. * * @notapi */ static void tp_lld_filter(void) { uint16_t temp; int i,j; for(i = 0; i < 4; i++) { for(j=i; j < 7; j++) { if(sampleBuf[i] > sampleBuf[j]) { /* Swap the values */ temp = sampleBuf[i]; sampleBuf[i] = sampleBuf[j]; sampleBuf[j] = temp; } } } } /** * @brief Reads out the X direction. * * @note The samples are median filtered for greater noise reduction * * @notapi */ uint16_t tp_lld_read_x(void) { int i; #if defined(SPI_USE_MUTUAL_EXCLUSION) spiAcquireBus(tpDriver->spip); #endif TOUCHPAD_SPI_PROLOGUE(); palClearPad(tpDriver->spicfg->ssport, tpDriver->spicfg->sspad); /* Discard the first conversion - very noisy and keep the ADC on hereafter * till we are done with the sampling. Note that PENIRQ is disabled. */ tp_lld_read_value(0xD1); for(i = 0; i < 7; i++) { sampleBuf[i]=tp_lld_read_value(0xD1); } /* Switch on PENIRQ once again - perform a dummy read */ tp_lld_read_value(0xD0); palSetPad(tpDriver->spicfg->ssport, tpDriver->spicfg->sspad); TOUCHPAD_SPI_EPILOGUE(); #if defined(SPI_USE_MUTUAL_EXCLUSION) spiReleaseBus(tpDriver->spip); #endif /* Find the median - use selection sort */ tp_lld_filter(); return sampleBuf[3]; } /* * @brief Reads out the Y direction. * * @notapi */ uint16_t tp_lld_read_y(void) { int i; #if defined(SPI_USE_MUTUAL_EXCLUSION) spiAcquireBus(tpDriver->spip); #endif TOUCHPAD_SPI_PROLOGUE(); palClearPad(tpDriver->spicfg->ssport, tpDriver->spicfg->sspad); /* Discard the first conversion - very noisy and keep the ADC on hereafter * till we are done with the sampling. Note that PENIRQ is disabled. */ tp_lld_read_value(0x91); for(i = 0; i < 7; i++) { sampleBuf[i] = tp_lld_read_value(0x91); } /* Switch on PENIRQ once again - perform a dummy read */ tp_lld_read_value(0x90); palSetPad(tpDriver->spicfg->ssport, tpDriver->spicfg->sspad); TOUCHPAD_SPI_EPILOGUE(); #ifdef SPI_USE_MUTUAL_EXCLUSION spiReleaseBus(tpDriver->spip); #endif /* Find the median - use selection sort */ tp_lld_filter(); return sampleBuf[3]; } /* ---- Optional Routines ---- */ #if TOUCHPAD_HAS_IRQ || defined(__DOXYGEN__) /* * @brief for checking if touchpad is pressed or not. * * @return 1 if pressed / 0 if not pressed * * @notapi */ uint8_t tp_lld_irq(void) { return (!palReadPad(tpDriver->tpIRQPort, tpDriver->tpIRQPin)); } #endif #if TOUCHPAD_HAS_PRESSURE || defined(__DOXYGEN__) /* * @brief Reads out the Z direction / pressure. * * @notapi */ uint16_t tp_lld_read_z(void) { /* ToDo */ return 42; } #endif #endif /* GFX_USE_TOUCHPAD */ /** @} */