/* * This file is subject to the terms of the GFX License. If a copy of * the license was not distributed with this file, you can obtain one at: * * http://ugfx.org/license.html */ #ifndef _GDISP_LLD_BOARD_H #define _GDISP_LLD_BOARD_H // Define options for this driver #define UC8173_REVERSEAXIS_Y GFXOFF #define UC8173_REVERSEAXIS_X GFXOFF #define UC8173_USE_OTP_LUT GFXOFF /* Use the LUT in the OTP - untested */ #define UC8173_DEFAULT_MODE 0 /* Which entry in the mode table to start with */ #define UC8173_CAN_READ GFXOFF /* Reading the controller chip is supported */ #define UC8173_VCOM_VOLTAGE -2.80 /* Read this off the sticker on the back of the display or set UC8173_CAN_READ to have the chip read */ #define UC8171_BORDER 0 /* 0 = Hi-Z, 1 = Black, 2 = White */ // Define the waveform table #include "UC8173_waveform_examples.h" static UC8173Lut UC8173_ModeTable[] = { // 32 bytes, 512 bytes, 128 bytes, regal { _lut_KWvcom_DC_A2_240ms, _lut_kw_A2_240ms, _lut_ft, gFalse }, { _lut_KWvcom_DC_A2_120ms, _lut_kw_A2_120ms, _lut_ft, gFalse }, { _lut_KWvcom_DC_GU, _lut_kw_GU, _lut_ft, gTrue }, { _lut_KWvcom_GC, _lut_kw_GC, _lut_ft, gFalse } // Add extra lines for other waveforms }; static GFXINLINE gBool init_board(GDisplay* g) { (void) g; return gTrue; } static GFXINLINE void post_init_board(GDisplay* g) { (void) g; } static GFXINLINE void setpin_reset(GDisplay *g, gBool state) { (void) g; (void) state; } static GFXINLINE gBool getpin_busy(GDisplay* g) { (void)g; return gFalse; } static GFXINLINE void acquire_bus(GDisplay* g) { (void) g; } static GFXINLINE void release_bus(GDisplay* g) { (void) g; } static GFXINLINE void write_cmd(GDisplay* g, uint8_t cmd) { (void) g; (void) cmd; } static GFXINLINE void write_data(GDisplay* g, uint8_t data) { (void) g; (void) data; } static GFXINLINE void write_data_burst(GDisplay* g, uint8_t* data, unsigned length) { (void) g; (void) data; (void) length; } #if UC8173_CAN_READ static GFXINLINE uint8_t read_data(GDisplay* g) { (void)g; return 0; } #endif #endif /* _GDISP_LLD_BOARD_H */