/* * This file is subject to the terms of the GFX License. If a copy of * the license was not distributed with this file, you can obtain one at: * * http://ugfx.org/license.html */ /** * @file boards/addons/gdisp/board_S6D1121_olimex_e407.h * @brief GDISP Graphic Driver subsystem board interface for the S6D1121 display. * * @note This file contains a mix of hardware specific and operating system specific * code. You will need to change it for your CPU and/or operating system. */ #ifndef _GDISP_LLD_BOARD_H #define _GDISP_LLD_BOARD_H // For a multiple display configuration we would put all this in a structure and then // set g->board to that structure. #define GDISP_REG (*((volatile uint16_t *) 0x60000000)) /* RS = 0 */ #define GDISP_RAM (*((volatile uint16_t *) 0x60020000)) /* RS = 1 */ static GFXINLINE void init_board(GDisplay *g) { // As we are not using multiple displays we set g->board to NULL as we don't use it. g->board = 0; switch(g->controllerdisplay) { case 0: // Set up for Display 0 /* STM32F4 FSMC init */ rccEnableAHB3(RCC_AHB3ENR_FSMCEN, 0); /* set pins to FSMC mode */ IOBus busD = {GPIOD, (1 << 0) | (1 << 1) | (1 << 4) | (1 << 5) | (1 << 7) | (1 << 8) | (1 << 9) | (1 << 10) | (1 << 11) | (1 << 14) | (1 << 15), 0}; IOBus busE = {GPIOE, (1 << 7) | (1 << 8) | (1 << 9) | (1 << 10) | (1 << 11) | (1 << 12) | (1 << 13) | (1 << 14) | (1 << 15), 0}; palSetBusMode(&busD, PAL_MODE_ALTERNATE(12)); palSetBusMode(&busE, PAL_MODE_ALTERNATE(12)); /* FSMC timing */ FSMC_Bank1->BTCR[0+1] = (6) | (10 << 8) | (10 << 16); /* Bank1 NOR/SRAM control register configuration */ FSMC_Bank1->BTCR[0] = FSMC_BCR1_MWID_0 | FSMC_BCR1_WREN | FSMC_BCR1_MBKEN; break; } } static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) { (void) g; (void) state; } static GFXINLINE void set_backlight(GDisplay *g, uint8_t percent) { (void) g; (void) percent; } static GFXINLINE void acquire_bus(GDisplay *g) { (void) g; } static GFXINLINE void release_bus(GDisplay *g) { (void) g; } static GFXINLINE void write_index(GDisplay *g, uint16_t index) { (void) g; GDISP_REG = index; } static GFXINLINE void write_data(GDisplay *g, uint16_t data) { (void) g; GDISP_RAM = data; } static GFXINLINE void setreadmode(GDisplay *g) { (void) g; } static GFXINLINE void setwritemode(GDisplay *g) { (void) g; } static GFXINLINE uint16_t read_data(GDisplay *g) { (void) g; return GDISP_RAM; } #endif /* _GDISP_LLD_BOARD_H */