/* ChibiOS/GFX - Copyright (C) 2012 Joel Bodenmann aka Tectu This file is part of ChibiOS/GFX. ChibiOS/GFX is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. ChibiOS/GFX is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ /** * @file drivers/gdisp/Nokia6610GE12/gdisp_lld.c * @brief GDISP Graphics Driver subsystem low level driver source for the Nokia6610 GE12 display. * * @addtogroup GDISP * @{ */ #include "ch.h" #include "hal.h" #include "gfx.h" #if GFX_USE_GDISP /*|| defined(__DOXYGEN__)*/ /* Include the emulation code for things we don't support */ #include "gdisp/lld/emulation.c" /*===========================================================================*/ /* Driver local definitions. */ /*===========================================================================*/ /* Controller definitions */ #include "GE12.h" /* This controller is only ever used with a 132 x 132 display */ #if defined(GDISP_SCREEN_HEIGHT) #warning "GDISP: This low level driver does not support setting a screen size. It is being ignored." #undef GDISP_SCREEN_HEIGHT #endif #if defined(GDISP_SCREEN_WIDTH) #warning "GDISP: This low level driver does not support setting a screen size. It is being ignored." #undef GDISP_SCREEN_WIDTH #endif #define GDISP_SCREEN_HEIGHT 132 #define GDISP_SCREEN_WIDTH 132 #define GDISP_INITIAL_CONTRAST 38 #define GDISP_INITIAL_BACKLIGHT 100 /*===========================================================================*/ /* Driver exported variables. */ /*===========================================================================*/ /*===========================================================================*/ /* Driver local variables. */ /*===========================================================================*/ /*===========================================================================*/ /* Driver local functions. */ /*===========================================================================*/ #if defined(GDISP_USE_CUSTOM_BOARD) && GDISP_USE_CUSTOM_BOARD /* Include the user supplied board definitions */ #include "gdisp_lld_board.h" #elif defined(BOARD_OLIMEX_SAM7_EX256) #include "gdisp_lld_board_olimexsam7ex256.h" #else /* Include the user supplied board definitions */ #include "gdisp_lld_board.h" #endif // Some macros just to make reading the code easier #define delayms(ms) chThdSleepMilliseconds(ms) #define write_data2(d1, d2) { write_data(d1); write_data(d2); } #define write_data3(d1, d2, d3) { write_data(d1); write_data(d2); write_data(d3); } #define write_cmd1(cmd, d1) { write_cmd(cmd); write_data(d1); } #define write_cmd2(cmd, d1, d2) { write_cmd(cmd); write_data2(d1, d2); } #define write_cmd3(cmd, d1, d2, d3) { write_cmd(cmd); write_data3(d1, d2, d3); } // A very common thing to do. // An inline function has been used here incase the parameters have side effects with the internal calculations. static inline void setviewport(coord_t x, coord_t y, coord_t cx, coord_t cy) { write_cmd2(CASET, x, x+cx-1); // Column address set write_cmd2(PASET, y, y+cy-1); // Page address set } /*===========================================================================*/ /* Driver interrupt handlers. */ /*===========================================================================*/ /*===========================================================================*/ /* Driver exported functions. */ /*===========================================================================*/ /* ---- Required Routines ---- */ /* The following 2 routines are required. All other routines are optional. */ /** * @brief Low level GDISP driver initialization. * * @notapi */ bool_t gdisp_lld_init(void) { /* Initialise your display */ init_board(); // Hardware reset setpin_reset(TRUE); delayms(20); setpin_reset(FALSE); delayms(20); // Get the bus for the following initialisation commands acquire_bus(); // UNTESTED #if 1 write_cmd(SLEEPOUT); // Sleep out write_cmd(INVON); // Inversion on: seems to be required for this controller write_cmd1(COLMOD, 0x03); // Color Interface Pixel Format - 0x03 = 12 bits-per-pixel write_cmd1(MADCTL, 0xC8); // Memory access controler - 0xC0 = mirror x and y, reverse rgb write_cmd1(SETCON, GDISP_INITIAL_CONTRAST); // Write contrast delayms(20); write_cmd(DISPON); // Display On #else // Alternative write_cmd(SOFTRST); // Software Reset delayms(20); write_cmd(INITESC); // Initial escape delayms(20); write_cmd1(REFSET, 0x00); // Refresh set write_cmd(DISPCTRL); // Set Display control - really 7 bytes of data write_data(128); // Set the lenght of one selection term write_data(128); // Set N inversion -> no N inversion write_data(134); // Set frame frequence and bias rate -> 2 devision of frequency and 1/8 bias, 1/67 duty, 96x67 size write_data(84); // Set duty parameter write_data(69); // Set duty parameter write_data(82); // Set duty parameter write_data(67); // Set duty parameter write_cmd(GRAYSCALE0); // Grey scale 0 position set - really 15 bytes of data write_data(1); // GCP1 - gray lavel to be output when the RAM data is "0001" write_data(2); // GCP2 - gray lavel to be output when the RAM data is "0010" write_data(4); // GCP3 - gray lavel to be output when the RAM data is "0011" write_data(8); // GCP4 - gray lavel to be output when the RAM data is "0100" write_data(16); // GCP5 - gray lavel to be output when the RAM data is "0101" write_data(30); // GCP6 - gray lavel to be output when the RAM data is "0110" write_data(40); // GCP7 - gray lavel to be output when the RAM data is "0111" write_data(50); // GCP8 - gray lavel to be output when the RAM data is "1000" write_data(60); // GCP9 - gray lavel to be output when the RAM data is "1001" write_data(70); // GCP10 - gray lavel to be output when the RAM data is "1010" write_data(80); // GCP11 - gray lavel to be output when the RAM data is "1011" write_data(90); // GCP12 - gray lavel to be output when the RAM data is "1100" write_data(100); // GCP13 - gray lavel to be output when the RAM data is "1101" write_data(110); // GCP14 - gray lavel to be output when the RAM data is "1110" write_data(127); // GCP15 - gray lavel to be output when the RAM data is "1111" write_cmd1(GAMMA, 0x01); // Gamma curve set - select gray scale - GRAYSCALE 0 or GREYSCALE 1 - Select grey scale 0 write_cmd1(COMMONDRV, 0x00); // Command driver output - Set COM1-COM41 side come first, normal mod write_cmd(NORMALMODE); // Set Normal mode (my) // write_cmd(INVERSIONOFF); // Inversion off write_cmd2(COLADDRSET, 0, 131); // Column address set write_cmd2(PAGEADDRSET, 0, 131); // Page address set write_cmd1(ACCESSCTRL, 0x40); // Memory access controler - 0x40 horizontal // write_data(0x20); // vertical write_cmd1(PWRCTRL, 0x04); // Power control - Internal resistance, V1OUT -> high power mode, oscilator devision rate write_cmd(SLEEPOUT); // Sleep out write_cmd(VOLTCTRL); // Voltage control - voltage control and write contrast define LCD electronic volume // write_data(0x7f); // full voltage control // write_data(0x03); // must be "1" write_cmd1(CONTRAST, GDISP_INITIAL_CONTRAST); // Write contrast delayms(20); write_cmd(TEMPGRADIENT); // Temperature gradient - really 14 bytes of data for(i=0; i<14; i++) write_data(0); write_cmd(BOOSTVON); // Booster voltage ON write_cmd(DISPLAYON); // Finally - Display On #endif // Release the bus release_bus(); /* Turn on the back-light */ set_backlight(GDISP_INITIAL_BACKLIGHT); /* Initialise the GDISP structure to match */ GDISP.Width = GDISP_SCREEN_WIDTH; GDISP.Height = GDISP_SCREEN_HEIGHT; GDISP.Orientation = GDISP_ROTATE_0; GDISP.Powermode = powerOn; GDISP.Backlight = GDISP_INITIAL_BACKLIGHT; GDISP.Contrast = GDISP_INITIAL_CONTRAST; #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP GDISP.clipx0 = 0; GDISP.clipy0 = 0; GDISP.clipx1 = GDISP.Width; GDISP.clipy1 = GDISP.Height; #endif return TRUE; } /** * @brief Draws a pixel on the display. * * @param[in] x X location of the pixel * @param[in] y Y location of the pixel * @param[in] color The color of the pixel * * @notapi */ void gdisp_lld_draw_pixel(coord_t x, coord_t y, color_t color) { #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP if (x < GDISP.clipx0 || y < GDISP.clipy0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return; #endif acquire_bus(); setviewport(x, y, 1, 1); write_cmd3(RAMWR, 0, (color>>8) & 0x0F, color & 0xFF); release_bus(); } /* ---- Optional Routines ---- */ #if GDISP_HARDWARE_FILLS || defined(__DOXYGEN__) /** * @brief Fill an area with a color. * * @param[in] x, y The start filled area * @param[in] cx, cy The width and height to be filled * @param[in] color The color of the fill * * @notapi */ void gdisp_lld_fill_area(coord_t x, coord_t y, coord_t cx, coord_t cy, color_t color) { unsigned i, tuples; #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP if (x < GDISP.clipx0) { cx -= GDISP.clipx0 - x; x = GDISP.clipx0; } if (y < GDISP.clipy0) { cy -= GDISP.clipy0 - y; y = GDISP.clipy0; } if (cx <= 0 || cy <= 0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return; if (x+cx > GDISP.clipx1) cx = GDISP.clipx1 - x; if (y+cy > GDISP.clipy1) cy = GDISP.clipy1 - y; #endif tuples = (cx*cy+1)/2; // With an odd sized area we over-print by one pixel. // This extra pixel is ignored by the controller. acquire_bus(); setviewport(x, y, cx, cy); write_cmd(RAMWR); for(i=0; i < tuples; i++) write_data3(((color >> 4) & 0xFF), (((color << 4) & 0xF0)|((color >> 8) & 0x0F)), (color & 0xFF)); release_bus(); } #endif #if GDISP_HARDWARE_BITFILLS || defined(__DOXYGEN__) /** * @brief Fill an area with a bitmap. * * @param[in] x, y The start filled area * @param[in] cx, cy The width and height to be filled * @param[in] srcx, srcy The bitmap position to start the fill from * @param[in] srccx The width of a line in the bitmap. * @param[in] buffer The pixels to use to fill the area. * * @notapi */ void gdisp_lld_blit_area_ex(coord_t x, coord_t y, coord_t cx, coord_t cy, coord_t srcx, coord_t srcy, coord_t srccx, const pixel_t *buffer) { coord_t endx, endy, lg; color_t c1, c2; #if GDISP_PACKED_PIXELS coord_t pos; const uint8_t *p; #endif #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP if (x < GDISP.clipx0) { cx -= GDISP.clipx0 - x; srcx += GDISP.clipx0 - x; x = GDISP.clipx0; } if (y < GDISP.clipy0) { cy -= GDISP.clipy0 - y; srcy += GDISP.clipy0 - y; y = GDISP.clipy0; } if (srcx+cx > srccx) cx = srccx - srcx; if (cx <= 0 || cy <= 0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return; if (x+cx > GDISP.clipx1) cx = GDISP.clipx1 - x; if (y+cy > GDISP.clipy1) cy = GDISP.clipy1 - y; #endif /* What are our end points */ endx = srcx + cx; endy = y + cy; acquire_bus(); setviewport(x, y, cx, cy); write_cmd(RAMWR); #if !GDISP_PACKED_PIXELS // Although this controller uses packed pixels we support unpacked pixel // formats in this blit by packing the data as we feed it to the controller. lg = srccx - cx; buffer += srcy * srccx + srcx; x = srcx; while (1) { /* Get a pixel */ c1 = *buffer++; if (++x >= endx) { if (++y >= endy) { /* Odd pixel at end */ write_data3(0, ((c1 >> 8) & 0x0F), (c1 & 0xFF)); break; } x = srcx; buffer += lg; } /* Get the next pixel */ c2 = *buffer++; write_data3(((c1 >> 4) & 0xFF), (((c1 << 4) & 0xF0)|((c2 >> 8) & 0x0F)), (c2 & 0xFF)); if (++x >= endx) { if (++y >= endy) break; x = srcx; buffer += lg; } } #else // Although this controller uses packed pixels, we may have to feed it into // the controller with different packing to the source bitmap #if !GDISP_PACKED_LINES srccx = (srccx + 1) & ~1; #endif pos = srcy*srccx; lg = (srccx - cx)/2*3; p = ((const uint8_t *)buffer) + ((pos+srcx)/2 * 3); x = srcx; while (1) { /* Get a pixel */ switch((pos+x)&1) { case 0: c1 = (((color_t)p[0]) << 4)|(((color_t)p[1])>>4); break; case 1: c1 = (((color_t)p[1]&0x0F) << 8)|((color_t)p[1]); break; } if (++x >= endx) { if (++y >= endy) { /* Odd pixel at end */ write_data3(0, ((c1 >> 8) & 0x0F), (c1 & 0xFF)); break; } x = srcx; p += lg; pos += srccx; } /* Get the next pixel */ switch((pos+x)&1) { case 0: c2 = (((color_t)p[0]) << 4)|(((color_t)p[1])>>4); break; case 1: c2 = (((color_t)p[1]&0x0F) << 8)|((color_t)p[1]); break; } write_data3(((c1 >> 4) & 0xFF), (((c1 << 4) & 0xF0)|((c2 >> 8) & 0x0F)), (c2 & 0xFF)); if (++x >= endx) { if (++y >= endy) break; x = srcx; p += lg; pos += srccx; } } #endif release_bus(); } #endif #if (GDISP_NEED_PIXELREAD && GDISP_HARDWARE_PIXELREAD) /** * @brief Get the color of a particular pixel. * @note If x,y is off the screen, the result is undefined. * * @param[in] x, y The start of the text * * @notapi */ color_t gdisp_lld_get_pixel_color(coord_t x, coord_t y) { /* NOT IMPLEMENTED */ /* Some board hardware might support this in the future. * The Olimex board doesn't. */ } #endif #if (GDISP_NEED_SCROLL && GDISP_HARDWARE_SCROLL) /** * @brief Scroll vertically a section of the screen. * @note If x,y + cx,cy is off the screen, the result is undefined. * @note If lines is >= cy, it is equivelent to a area fill with bgcolor. * * @param[in] x, y The start of the area to be scrolled * @param[in] cx, cy The size of the area to be scrolled * @param[in] lines The number of lines to scroll (Can be positive or negative) * @param[in] bgcolor The color to fill the newly exposed area. * * @notapi */ void gdisp_lld_vertical_scroll(coord_t x, coord_t y, coord_t cx, coord_t cy, int lines, color_t bgcolor) { /* NOT IMPLEMENTED */ /* The hardware seems capable of doing this. * It is just really complex so we leave it out for now. */ } #endif #if GDISP_HARDWARE_CONTROL || defined(__DOXYGEN__) /** * @brief Driver Control * @details Unsupported control codes are ignored. * @note The value parameter should always be typecast to (void *). * @note There are some predefined and some specific to the low level driver. * @note GDISP_CONTROL_POWER - Takes a gdisp_powermode_t * GDISP_CONTROL_ORIENTATION - Takes a gdisp_orientation_t * GDISP_CONTROL_BACKLIGHT - Takes an int from 0 to 100. For a driver * that only supports off/on anything other * than zero is on. * GDISP_CONTROL_CONTRAST - Takes an int from 0 to 100. * GDISP_CONTROL_LLD - Low level driver control constants start at * this value. * * @param[in] what What to do. * @param[in] value The value to use (always cast to a void *). * * @notapi */ void gdisp_lld_control(unsigned what, void *value) { /* The hardware is capable of supporting... * GDISP_CONTROL_POWER - not implemented yet * GDISP_CONTROL_ORIENTATION - not implemented yet * GDISP_CONTROL_BACKLIGHT - supported (the OlimexSAM7EX256 board.h currently only implements off/on although PWM is supported by the hardware) * GDISP_CONTROL_CONTRAST - supported */ switch(what) { #if 0 // NOT IMPLEMENTED YET case GDISP_CONTROL_POWER: if (GDISP.Powermode == (gdisp_powermode_t)value) return; switch((gdisp_powermode_t)value) { case powerOff: // Code here break; case powerOn: // Code here /* You may need this --- * if (GDISP.Powermode != powerSleep) * gdisp_lld_init(); */ break; case powerSleep: /* Code here */ break; default: return; } GDISP.Powermode = (gdisp_powermode_t)value; return; #endif #if 0 // NOT IMPLEMENTED YET case GDISP_CONTROL_ORIENTATION: if (GDISP.Orientation == (gdisp_orientation_t)value) return; // WriteSpiData(0x48); // no mirror Y (temporary to satisfy Olimex bmptoarray utility) // WriteSpiData(0xC8); // restore to (mirror x and y, reverse rgb) switch((gdisp_orientation_t)value) { case GDISP_ROTATE_0: // Code here GDISP.Height = GDISP_SCREEN_HEIGHT; GDISP.Width = GDISP_SCREEN_WIDTH; break; case GDISP_ROTATE_90: // Code here GDISP.Height = GDISP_SCREEN_WIDTH; GDISP.Width = GDISP_SCREEN_HEIGHT; break; case GDISP_ROTATE_180: // Code here GDISP.Height = GDISP_SCREEN_HEIGHT; GDISP.Width = GDISP_SCREEN_WIDTH; break; case GDISP_ROTATE_270: // Code here GDISP.Height = GDISP_SCREEN_WIDTH; GDISP.Width = GDISP_SCREEN_HEIGHT; break; default: return; } #if GDISP_NEED_CLIP || GDISP_NEED_VALIDATION GDISP.clipx0 = 0; GDISP.clipy0 = 0; GDISP.clipx1 = GDISP.Width; GDISP.clipy1 = GDISP.Height; #endif GDISP.Orientation = (gdisp_orientation_t)value; return; #endif case GDISP_CONTROL_BACKLIGHT: if ((unsigned)value > 100) value = (void *)100; set_backlight((unsigned)value); GDISP.Backlight = (unsigned)value; return; case GDISP_CONTROL_CONTRAST: if ((unsigned)value > 100) value = (void *)100; acquire_bus(); write_cmd1(CONTRAST,(unsigned)value); release_bus(); GDISP.Contrast = (unsigned)value; return; } } #endif #endif /* GFX_USE_GDISP */ /** @} */