ugfx/drivers/ginput/toggle/Pal/ginput_lld_toggle_board_template.h
Joel Bodenmann 08e1b0ebc7 Removed the doxygen inside of every driver as doxygen is only meant for highlevel API documentation.
Documenting the drivers interface should be done inside a template driver or the gdisp LLD abstraction.
2014-03-28 19:45:08 +01:00

39 lines
1.4 KiB
C

/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.org/license.html
*/
#ifndef _GDISP_LLD_TOGGLE_BOARD_H
#define _GDISP_LLD_TOGGLE_BOARD_H
#error "GINPUT Toggle Pal Driver: You need to define your board definitions"
// The below are example values
#define GINPUT_TOGGLE_NUM_PORTS 7 // The total number of toggle inputs
#define GINPUT_TOGGLE_CONFIG_ENTRIES 2 // The total number of GToggleConfig entries
#define GINPUT_TOGGLE_SW1 0 // Switch 1
#define GINPUT_TOGGLE_SW2 1 // Switch 2
#define GINPUT_TOGGLE_UP 2 // Joystick Up
#define GINPUT_TOGGLE_DOWN 3 // Joystick Down
#define GINPUT_TOGGLE_LEFT 4 // Joystick Left
#define GINPUT_TOGGLE_RIGHT 5 // Joystick Right
#define GINPUT_TOGGLE_CENTER 6 // Joystick Center
#define GINPUT_TOGGLE_DECLARE_STRUCTURE() \
const GToggleConfig GInputToggleConfigTable[GINPUT_TOGGLE_CONFIG_ENTRIES] = { \
{AT91C_BASE_PIOB, /* Switch 1 and Switch 2 */ \
PIOB_SW1_MASK|PIOB_SW2_MASK, \
PIOB_SW1_MASK|PIOB_SW2_MASK, \
PAL_MODE_INPUT}, \
{AT91C_BASE_PIOA, /* B1..4 Joystick */ \
PIOA_B1_MASK|PIOA_B2_MASK|PIOA_B3_MASK|PIOA_B4_MASK|PIOA_B5_MASK, \
PIOA_B1_MASK|PIOA_B2_MASK|PIOA_B3_MASK|PIOA_B4_MASK|PIOA_B5_MASK, \
PAL_MODE_INPUT}, \
}
#endif /* _GDISP_LLD_TOGGLE_BOARD_H */