ugfx/drivers/gdisp/SSD1963/gdisp_lld_panel_example.h
2013-07-21 22:20:37 +02:00

75 lines
2.7 KiB
C

/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.org/license.html
*/
/**
* @file drivers/gdisp/SSD1963/gdisp_lld_panel_example.h
* @brief TFT LCD panel properties.
*
* @addtogroup GDISP
* @{
*/
#ifndef _GDISP_LLD_PANEL_H
#define _GDISP_LLD_PANEL_H
/* LCD panel specs */
/* The timings need to follow the datasheet for your particular TFT/LCD screen (the actual screen, not the controller)
*** Datasheets normally use a specific set of timings and acronyms, their value refers to the number of pixel clocks
** Non-display periods refer to pulses/timings that occur before or after the timings that actually put pixels on the screen
** Display periods refer to pulses/timings that directly put pixels on the screen
HDP: Horizontal Display Period, normally the width - 1
HT: Horizontal Total period (display + non-display)
HPS: non-display period between the start of the horizontal sync (LLINE) signal and the first display data
LPS: horizontal sync pulse (LLINE) start location in pixel clocks
HPW: Horizontal sync Pulse Width
VDP: Vertical Display period, normally height - 1
VT: Vertical Total period (display + non-display)
VPS: non-display period in lines between the start of the frame and the first display data in number of lines
FPS: vertical sync pulse (LFRAME) start location in lines.
VPW: Vertical sync Pulse Width
*** Here's how to convert them:
HPS = SCREEN_HSYNC_PULSE + SCREEN_HSYNC_BACK_PORCH
HT - HPS = GDISP_SCREEN_WIDTH + SCREEN_HSYNC_FRONT_PORCH
=> SCREEN_HSYNC_FRONT_PORCH = ( HT - HPS ) - GDISP_SCREEN_WIDTH
SCREEN_HSYNC_PULSE = HPW
SCREEN_HSYNC_BACK_PORCH = HPS - HPW
SCREEN_HSYNC_PERIOD = HT
VPS = SCREEN_VSYNC_PULSE + SCREEN_VSYNC_BACK_PORCH
VT - VPS = GDISP_SCREEN_HEIGHT + SCREEN_VSYNC_FRONT_PORCH
=> SCREEN_VSYNC_FRONT_PORCH = ( VT - VPS ) - GDISP_SCREEN_HEIGHT
SCREEN_VSYNC_PULSE = VPW
SCREEN_VSYNC_BACK_PORCH = VPS - LPS
SCREEN_VSYNC_PERIOD = VT
*/
#define SCREEN_FPS 60ULL
//The following values are for a 4.3" TFT LCD
#define GDISP_SCREEN_WIDTH 480
#define GDISP_SCREEN_HEIGHT 272
#define SCREEN_HSYNC_BACK_PORCH 2
#define SCREEN_HSYNC_FRONT_PORCH 2
#define SCREEN_HSYNC_PULSE 41
#define SCREEN_VSYNC_BACK_PORCH 2
#define SCREEN_VSYNC_FRONT_PORCH 2
#define SCREEN_VSYNC_PULSE 10
#define SCREEN_HSYNC_PERIOD (SCREEN_HSYNC_PULSE + SCREEN_HSYNC_BACK_PORCH + GDISP_SCREEN_WIDTH + SCREEN_HSYNC_FRONT_PORCH)
#define SCREEN_VSYNC_PERIOD (SCREEN_VSYNC_PULSE + SCREEN_VSYNC_BACK_PORCH + GDISP_SCREEN_HEIGHT + SCREEN_VSYNC_FRONT_PORCH)
#define SCREEN_PCLK (SCREEN_HSYNC_PERIOD * SCREEN_VSYNC_PERIOD * SCREEN_FPS)
#define GDISP_FPR ((SCREEN_PCLK * 1048576)/100000000)
#endif
/** @} */