8b51bcf46f
Touch: - Move defines that may be altered by the touch config file to the lld header file. - Move the definition of the Touch driver structure to the lld config file. - Changed CONVERSIONS macro to TOUCHSCREEN_CONVERSIONS - Replaced references to GDISP_SCREEN_WIDTH with gdispGetWidth - Renamed TOUCHSCREEN_HAS_IRQ to TOUCHSCREEN_HAS_PRESSED to match new function name. - Added prototypes for calibration storage functions to touchscreen_lld.h so that either the lld driver or the application can define the function. Console: -Deprecated into "old" directory. Functionality replaced by gwin.
242 lines
6.5 KiB
C
242 lines
6.5 KiB
C
/*
|
|
ChibiOS/GFX - Copyright (C) 2012
|
|
Joel Bodenmann aka Tectu <joel@unormal.org>
|
|
|
|
This file is part of ChibiOS/GFX.
|
|
|
|
ChibiOS/GFX is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
ChibiOS/GFX is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/**
|
|
* @file drivers/touchscreen/ADS7843/touchscreen_lld.c
|
|
* @brief Touchscreen Driver subsystem low level driver source.
|
|
*
|
|
* @addtogroup TOUCHSCREEN
|
|
* @{
|
|
*/
|
|
|
|
#include "ch.h"
|
|
#include "hal.h"
|
|
#include "touchscreen.h"
|
|
|
|
#if GFX_USE_TOUCHSCREEN /*|| defined(__DOXYGEN__)*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local definitions. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver exported variables. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local variables. */
|
|
/*===========================================================================*/
|
|
#if !defined(__DOXYGEN__)
|
|
/* Local copy of the current touchscreen driver */
|
|
static const TouchscreenDriver *tsDriver;
|
|
|
|
static uint16_t sampleBuf[7];
|
|
#endif
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local functions. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver interrupt handlers. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver exported functions. */
|
|
/*===========================================================================*/
|
|
|
|
/* ---- Required Routines ---- */
|
|
|
|
/**
|
|
* @brief Low level touchscreen driver initialization.
|
|
*
|
|
* @param[in] ts The touchscreen driver
|
|
*
|
|
* @notapi
|
|
*/
|
|
void ts_lld_init(const TouchscreenDriver *ts) {
|
|
tsDriver = ts;
|
|
|
|
if(tsDriver->direct_init)
|
|
spiStart(tsDriver->spip, tsDriver->spicfg);
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Reads a conversion from the touchscreen
|
|
*
|
|
* @param[in] cmd The command bits to send to the touchscreen
|
|
*
|
|
* @return The read value 12-bit right-justified
|
|
*
|
|
* @note This function only reads data, it is assumed that the pins are
|
|
* configured properly and the bus has been acquired beforehand
|
|
*
|
|
* @notapi
|
|
*/
|
|
uint16_t ts_lld_read_value(uint8_t cmd) {
|
|
static uint8_t txbuf[3] = {0};
|
|
static uint8_t rxbuf[3] = {0};
|
|
uint16_t ret;
|
|
|
|
txbuf[0] = cmd;
|
|
|
|
spiExchange(tsDriver->spip, 3, txbuf, rxbuf);
|
|
|
|
ret = (rxbuf[1] << 5) | (rxbuf[2] >> 3);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* @brief 7-point median filtering code for touchscreen samples
|
|
*
|
|
* @note This is an internally used routine only.
|
|
*
|
|
* @notapi
|
|
*/
|
|
static void ts_lld_filter(void) {
|
|
uint16_t temp;
|
|
int i,j;
|
|
|
|
for(i = 0; i < 4; i++) {
|
|
for(j = i; j < 7; j++) {
|
|
if(sampleBuf[i] > sampleBuf[j]) {
|
|
/* Swap the values */
|
|
temp = sampleBuf[i];
|
|
sampleBuf[i] = sampleBuf[j];
|
|
sampleBuf[j] = temp;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Reads out the X direction.
|
|
*
|
|
* @note The samples are median filtered for greater noise reduction
|
|
*
|
|
* @notapi
|
|
*/
|
|
uint16_t ts_lld_read_x(void) {
|
|
int i;
|
|
|
|
#if defined(SPI_USE_MUTUAL_EXCLUSION)
|
|
spiAcquireBus(tsDriver->spip);
|
|
#endif
|
|
|
|
TOUCHSCREEN_SPI_PROLOGUE();
|
|
palClearPad(tsDriver->spicfg->ssport, tsDriver->spicfg->sspad);
|
|
|
|
/* Discard the first conversion - very noisy and keep the ADC on hereafter
|
|
* till we are done with the sampling. Note that PENIRQ is disabled.
|
|
*/
|
|
ts_lld_read_value(0xD1);
|
|
|
|
for(i = 0; i < 7; i++) {
|
|
sampleBuf[i] = ts_lld_read_value(0xD1);
|
|
}
|
|
|
|
/* Switch on PENIRQ once again - perform a dummy read */
|
|
ts_lld_read_value(0xD0);
|
|
|
|
palSetPad(tsDriver->spicfg->ssport, tsDriver->spicfg->sspad);
|
|
TOUCHSCREEN_SPI_EPILOGUE();
|
|
|
|
#if defined(SPI_USE_MUTUAL_EXCLUSION)
|
|
spiReleaseBus(tsDriver->spip);
|
|
#endif
|
|
|
|
/* Find the median - use selection sort */
|
|
ts_lld_filter();
|
|
|
|
return sampleBuf[3];
|
|
}
|
|
|
|
/*
|
|
* @brief Reads out the Y direction.
|
|
*
|
|
* @notapi
|
|
*/
|
|
uint16_t ts_lld_read_y(void) {
|
|
int i;
|
|
|
|
#if defined(SPI_USE_MUTUAL_EXCLUSION)
|
|
spiAcquireBus(tsDriver->spip);
|
|
#endif
|
|
|
|
TOUCHSCREEN_SPI_PROLOGUE();
|
|
palClearPad(tsDriver->spicfg->ssport, tsDriver->spicfg->sspad);
|
|
|
|
/* Discard the first conversion - very noisy and keep the ADC on hereafter
|
|
* till we are done with the sampling. Note that PENIRQ is disabled.
|
|
*/
|
|
ts_lld_read_value(0x91);
|
|
|
|
for(i = 0; i < 7; i++) {
|
|
sampleBuf[i] = ts_lld_read_value(0x91);
|
|
}
|
|
|
|
/* Switch on PENIRQ once again - perform a dummy read */
|
|
ts_lld_read_value(0x90);
|
|
|
|
palSetPad(tsDriver->spicfg->ssport, tsDriver->spicfg->sspad);
|
|
TOUCHSCREEN_SPI_EPILOGUE();
|
|
|
|
#ifdef SPI_USE_MUTUAL_EXCLUSION
|
|
spiReleaseBus(tsDriver->spip);
|
|
#endif
|
|
|
|
/* Find the median - use selection sort */
|
|
ts_lld_filter();
|
|
|
|
return sampleBuf[3];
|
|
}
|
|
|
|
/* ---- Optional Routines ---- */
|
|
#if TOUCHSCREEN_HAS_PRESSED || defined(__DOXYGEN__)
|
|
/*
|
|
* @brief for checking if touchscreen is pressed or not.
|
|
*
|
|
* @return 1 if pressed / 0 if not pressed
|
|
*
|
|
* @notapi
|
|
*/
|
|
uint8_t ts_lld_pressed(void) {
|
|
return (!palReadPad(tsDriver->tsIRQPort, tsDriver->tsIRQPin));
|
|
}
|
|
#endif
|
|
|
|
#if TOUCHSCREEN_HAS_PRESSURE || defined(__DOXYGEN__)
|
|
/*
|
|
* @brief Reads out the Z direction / pressure.
|
|
*
|
|
* @notapi
|
|
*/
|
|
uint16_t ts_lld_read_z(void) {
|
|
/* ToDo */
|
|
return 42;
|
|
}
|
|
#endif
|
|
|
|
#endif /* GFX_USE_TOUCHSCREEN */
|
|
/** @} */
|
|
|