158 lines
5.1 KiB
C
158 lines
5.1 KiB
C
/*
|
|
ChibiOS/GFX - Copyright (C) 2012, 2013
|
|
Joel Bodenmann aka Tectu <joel@unormal.org>
|
|
|
|
This file is part of ChibiOS/GFX.
|
|
|
|
ChibiOS/GFX is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
ChibiOS/GFX is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/**
|
|
* @file drivers/ginput/touch/STMPE811/ginput_lld_mouse.c
|
|
* @brief GINPUT Touch low level driver source for the STMPE811.
|
|
*
|
|
* @defgroup Mouse Mouse
|
|
* @ingroup GINPUT
|
|
* @{
|
|
*/
|
|
|
|
#include "ch.h"
|
|
#include "hal.h"
|
|
#include "gfx.h"
|
|
|
|
#include "stmpe811.h"
|
|
|
|
#if (GFX_USE_GINPUT && GINPUT_NEED_MOUSE) /*|| defined(__DOXYGEN__)*/
|
|
|
|
#include "ginput/lld/mouse.h"
|
|
|
|
#if defined(GINPUT_MOUSE_USE_CUSTOM_BOARD) && GINPUT_MOUSE_USE_CUSTOM_BOARD
|
|
#include "ginput_lld_mouse_board.h"
|
|
#elif defined(BOARD_EMBEST_DMSTF4BB)
|
|
#include "ginput_lld_mouse_board_embest_dmstf4bb.h"
|
|
#else
|
|
#include "ginput_lld_mouse_board_example.h"
|
|
#endif
|
|
|
|
static coord_t lastx, lasty, lastz;
|
|
|
|
/* set the active window of the stmpe811. bl is bottom left, tr is top right */
|
|
static void setActiveWindow(uint16_t bl_x, uint16_t bl_y, uint16_t tr_x, uint16_t tr_y)
|
|
{
|
|
write_reg(STMPE811_REG_WDW_TR_X, 2, tr_x);
|
|
write_reg(STMPE811_REG_WDW_TR_Y, 2, tr_y);
|
|
write_reg(STMPE811_REG_WDW_BL_X, 2, bl_x);
|
|
write_reg(STMPE811_REG_WDW_BL_Y, 2, bl_y);
|
|
}
|
|
|
|
/**
|
|
* @brief Initialise the mouse/touch.
|
|
*
|
|
* @notapi
|
|
*/
|
|
void ginput_lld_mouse_init(void)
|
|
{
|
|
init_board();
|
|
|
|
write_reg(STMPE811_REG_SYS_CTRL1, 1, 0x02); // Software chip reset
|
|
chThdSleepMilliseconds(10);
|
|
|
|
write_reg(STMPE811_REG_SYS_CTRL2, 1, 0x0C); // Temperature sensor clock off, GPIO clock off, touch clock on, ADC clock on
|
|
write_reg(STMPE811_REG_INT_EN, 1, 0x02); // Interrupt on INT pin when FIFO is equal or above threshold value OR touch is detected
|
|
write_reg(STMPE811_REG_ADC_CTRL1, 1, 0x48); // ADC conversion time = 80 clock ticks, 12-bit ADC, internal voltage refernce
|
|
chThdSleepMilliseconds(2);
|
|
|
|
write_reg(STMPE811_REG_ADC_CTRL2, 1, 0x01); // ADC speed 3.25MHz
|
|
write_reg(STMPE811_REG_GPIO_AF, 1, 0x00); // GPIO alternate function - OFF
|
|
write_reg(STMPE811_REG_TSC_CFG, 1, 0x9A); // Averaging 4, touch detect delay 500 us, panel driver settling time 500 us
|
|
write_reg(STMPE811_REG_FIFO_TH, 1, 0x01); // FIFO threshold = 1
|
|
write_reg(STMPE811_REG_FIFO_STA, 1, 0x01); // FIFO reset enable
|
|
write_reg(STMPE811_REG_FIFO_STA, 1, 0x00); // FIFO reset disable
|
|
write_reg(STMPE811_REG_TSC_FRACT_XYZ, 1, 0x07); // Z axis data format
|
|
write_reg(STMPE811_REG_TSC_I_DRIVE, 1, 0x01); // 50mA touchscreen line current
|
|
write_reg(STMPE811_REG_TSC_CTRL, 1, 0x01); // X&Y&Z, TSC enable
|
|
write_reg(STMPE811_REG_INT_STA, 1, 0xFF); // Clear all interrupts
|
|
write_reg(STMPE811_REG_INT_CTRL, 1, 0x01); // Level interrupt, enable intrrupts
|
|
}
|
|
|
|
/**
|
|
* @brief Read the mouse/touch position.
|
|
*
|
|
* @param[in] pt A pointer to the structure to fill
|
|
*
|
|
* @note For drivers that don't support returning a position
|
|
* when the touch is up (most touch devices), it should
|
|
* return the previous position with the new Z value.
|
|
* The z value is the pressure for those touch devices
|
|
* that support it (-100 to 100 where > 0 is touched)
|
|
* or, 0 or 100 for those drivers that don't.
|
|
*
|
|
* @notapi
|
|
*/
|
|
void ginput_lld_mouse_get_reading(MouseReading *pt)
|
|
{
|
|
//uint16_t buf;
|
|
uint8_t int_status;
|
|
|
|
// If not touched, return the previous results
|
|
if (!getpin_pressed()) {
|
|
pt->x = lastx;
|
|
pt->y = lasty;
|
|
pt->z = 0;
|
|
pt->buttons = 0;
|
|
return;
|
|
}
|
|
|
|
// Find out what caused an interrupt
|
|
int_status = read_reg(STMPE811_REG_INT_STA, 1);
|
|
|
|
// If it is TOUCH interrupt, clear it and go on
|
|
if (int_status & 0x02) {
|
|
|
|
uint8_t size = 0;
|
|
size = read_reg(STMPE811_REG_FIFO_SIZE, 1);
|
|
|
|
if (size) {
|
|
uint8_t buffer[size * 4];
|
|
read_reg_n(STMPE811_REG_TSC_DATA_AI, size * 4, buffer);
|
|
|
|
lastx = (coord_t)((buffer[0] << 4) | (buffer[1] >> 4));
|
|
lasty = (coord_t)(((buffer[1] & 0x0F) << 8) | buffer[2]);
|
|
lastz = (coord_t)buffer[3];
|
|
|
|
/* Get the X value */
|
|
//buf = read_reg(STMPE811_REG_TSC_DATA_X, 2);
|
|
//lastx = (coord_t)(buf);
|
|
|
|
/* Get the Y value */
|
|
//buf = read_reg(STMPE811_REG_TSC_DATA_Y, 2);
|
|
//lasty = (coord_t)(buf);
|
|
|
|
/* Get the Z value */
|
|
//buf = read_reg(STMPE811_REG_TSC_DATA_Z, 1);
|
|
//lastz = (buf & 0x00FF);
|
|
|
|
// Return the results. ADC gives values from 0 to 2^12
|
|
pt->x = 320 - lastx / 13;
|
|
pt->y = lasty / 17;
|
|
pt->z = lastz;
|
|
pt->buttons = GINPUT_TOUCH_PRESSED;
|
|
}
|
|
|
|
write_reg(STMPE811_REG_INT_STA, 1, 0x02);
|
|
}
|
|
}
|
|
|
|
#endif /* GFX_USE_GINPUT && GINPUT_NEED_MOUSE */
|
|
/** @} */
|