103 lines
2.9 KiB
C
103 lines
2.9 KiB
C
/*
|
|
* This file is subject to the terms of the GFX License. If a copy of
|
|
* the license was not distributed with this file, you can obtain one at:
|
|
*
|
|
* http://chibios-gfx.com/license.html
|
|
*/
|
|
|
|
/**
|
|
* @file drivers/gdisp/SSD1963/board_SSD1963_gpio.h
|
|
* @brief GDISP Graphic Driver subsystem board interface for the SSD1963 display.
|
|
*/
|
|
|
|
#ifndef _GDISP_LLD_BOARD_H
|
|
#define _GDISP_LLD_BOARD_H
|
|
|
|
static const LCD_Parameters DisplayTimings[] = {
|
|
// You need one of these array elements per display
|
|
{
|
|
480, 272, // Panel width and height
|
|
2, 2, 41, // Horizontal Timings (back porch, front porch, pulse)
|
|
CALC_PERIOD(480,2,2,41), // Total Horizontal Period (calculated from above line)
|
|
2, 2, 10, // Vertical Timings (back porch, front porch, pulse)
|
|
CALC_PERIOD(272,2,2,10), // Total Vertical Period (calculated from above line)
|
|
CALC_FPR(480,272,2,2,41,2,2,10,60ULL) // FPR - the 60ULL is the frames per second. Note the ULL!
|
|
},
|
|
};
|
|
|
|
// For a multiple display configuration we would put all this in a structure and then
|
|
// set g->board to that structure.
|
|
|
|
/**
|
|
* @brief The GPIO pin config
|
|
*
|
|
* @details This block of defines tell your driver how you wired your display
|
|
* controller to your MCU. Please change them accordingly.
|
|
*/
|
|
#define GDISP_CMD_PORT GPIOC
|
|
#define GDISP_DATA_PORT GPIOD
|
|
#define GDISP_CS 0
|
|
#define GDISP_RS 1
|
|
#define GDISP_WR 2
|
|
#define GDISP_RD 3
|
|
|
|
#define Set_CS palSetPad(GDISP_CMD_PORT, GDISP_CS);
|
|
#define Clr_CS palClearPad(GDISP_CMD_PORT, GDISP_CS);
|
|
#define Set_RS palSetPad(GDISP_CMD_PORT, GDISP_RS);
|
|
#define Clr_RS palClearPad(GDISP_CMD_PORT, GDISP_RS);
|
|
#define Set_WR palSetPad(GDISP_CMD_PORT, GDISP_WR);
|
|
#define Clr_WR palClearPad(GDISP_CMD_PORT, GDISP_WR);
|
|
#define Set_RD palSetPad(GDISP_CMD_PORT, GDISP_RD);
|
|
#define Clr_RD palClearPad(GDISP_CMD_PORT, GDISP_RD);
|
|
|
|
static inline void init_board(GDisplay *g) {
|
|
|
|
// As we are not using multiple displays we set g->board to NULL as we don't use it.
|
|
g->board = 0;
|
|
|
|
switch(g->controllerdisplay) {
|
|
case 0: // Set up for Display 0
|
|
IOBus busCMD = {GDISP_CMD_PORT, (1 << GDISP_CS) | (1 << GDISP_RS) | (1 << GDISP_WR) | (1 << GDISP_RD), 0};
|
|
IOBus busDATA = {GDISP_CMD_PORT, 0xFFFFF, 0};
|
|
palSetBusMode(&busCMD, PAL_MODE_OUTPUT_PUSHPULL);
|
|
palSetBusMode(&busDATA, PAL_MODE_OUTPUT_PUSHPULL);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static inline void post_init_board(GDisplay *g) {
|
|
(void) g;
|
|
}
|
|
|
|
static inline void setpin_reset(GDisplay *g, bool_t state) {
|
|
(void) g;
|
|
(void) state;
|
|
}
|
|
|
|
static inline void acquire_bus(GDisplay *g) {
|
|
(void) g;
|
|
Set_CS;
|
|
}
|
|
|
|
static inline void release_bus(GDisplay *g) {
|
|
(void) g;
|
|
Clr_CS;
|
|
}
|
|
|
|
static inline void write_index(GDisplay *g, uint16_t index) {
|
|
(void) g;
|
|
Set_RS; Clr_RD; Set_WR;
|
|
palWritePort(GDISP_DATA_PORT, index);
|
|
Clr_WR;
|
|
}
|
|
|
|
static inline void write_data(GDisplay *g, uint16_t data) {
|
|
(void) g;
|
|
Clr_RS; Clr_RD; Set_WR;
|
|
palWritePort(GDISP_DATA_PORT, data);
|
|
Clr_WR;
|
|
}
|
|
|
|
#endif /* _GDISP_LLD_BOARD_H */
|
|
|