ugfx/drivers/gdisp/Nokia6610GE8/board_Nokia6610GE8_template.h
Joel Bodenmann 08e1b0ebc7 Removed the doxygen inside of every driver as doxygen is only meant for highlevel API documentation.
Documenting the drivers interface should be done inside a template driver or the gdisp LLD abstraction.
2014-03-28 19:45:08 +01:00

60 lines
1.5 KiB
C

/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.org/license.html
*/
#ifndef _GDISP_LLD_BOARD_H
#define _GDISP_LLD_BOARD_H
/*
* Set various display properties. These properties mostly depend on the exact controller chip you get.
* The defaults should work for most controllers.
*/
//#define GDISP_SCREEN_HEIGHT 130 // The visible display height
//#define GDISP_SCREEN_WIDTH 130 // The visible display width
//#define GDISP_RAM_X_OFFSET 0 // The x offset of the visible area
//#define GDISP_RAM_Y_OFFSET 2 // The y offset of the visible area
//#define GDISP_SLEEP_POS 50 // The position of the sleep mode partial display
//#define GDISP_INITIAL_CONTRAST 50 // The initial contrast percentage
//#define GDISP_INITIAL_BACKLIGHT 100 // The initial backlight percentage
static inline void init_board(GDisplay *g) {
(void) g;
}
static inline void post_init_board(GDisplay *g) {
(void) g;
}
static inline void setpin_reset(GDisplay *g, bool_t state) {
(void) g;
(void) state;
}
static inline void set_backlight(GDisplay *g, uint8_t percent) {
(void) g;
(void) percent;
}
static inline void acquire_bus(GDisplay *g) {
(void) g;
}
static inline void release_bus(GDisplay *g) {
(void) g;
}
static inline void write_index(GDisplay *g, uint16_t index) {
(void) g;
(void) index;
}
static inline void write_data(GDisplay *g, uint16_t data) {
(void) g;
(void) data;
}
#endif /* _GDISP_LLD_BOARD_H */