ugfx/drivers/gdisp/S6D1121/gdisp_lld_board_olimex_e407.h

82 lines
2.1 KiB
C

/*
* This file is subject to the terms of the GFX License, v1.0. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://chibios-gfx.com/license.html
*/
/**
* @file drivers/gdisp/S6D1121/gdisp_lld_board_olimex_e407.h
* @brief GDISP Graphic Driver subsystem board interface for the S6D1121 display
*
* @addtogroup GDISP
* @{
*/
#ifndef _GDISP_LLD_BOARD_H
#define _GDISP_LLD_BOARD_H
#define GDISP_REG (*((volatile uint16_t *) 0x60000000)) /* RS = 0 */
#define GDISP_RAM (*((volatile uint16_t *) 0x60020000)) /* RS = 1 */
static inline void init_board(void) {
int FSMC_Bank = 0;
/* STM32F4 FSMC init */
rccEnableAHB3(RCC_AHB3ENR_FSMCEN, 0);
/* set pins to FSMC mode */
IOBus busD = {GPIOD, (1 << 0) | (1 << 1) | (1 << 4) | (1 << 5) | (1 << 7) | (1 << 8) |
(1 << 9) | (1 << 10) | (1 << 11) | (1 << 14) | (1 << 15), 0};
IOBus busE = {GPIOE, (1 << 7) | (1 << 8) | (1 << 9) | (1 << 10) | (1 << 11) | (1 << 12) |
(1 << 13) | (1 << 14) | (1 << 15), 0};
palSetBusMode(&busD, PAL_MODE_ALTERNATE(12));
palSetBusMode(&busE, PAL_MODE_ALTERNATE(12));
/* FSMC timing */
FSMC_Bank1->BTCR[FSMC_Bank+1] = (6) | (10 << 8) | (10 << 16);
/* Bank1 NOR/SRAM control register configuration */
FSMC_Bank1->BTCR[FSMC_Bank] = FSMC_BCR1_MWID_0 | FSMC_BCR1_WREN | FSMC_BCR1_MBKEN;
}
static inline void setpin_reset(bool_t state) {
(void)state;
/* Nothing to do here */
}
static inline void set_backlight(uint8_t percent) {
(void)percent;
/* Nothing to do here */
}
static inline void acquire_bus(void) {
/* Nothing to do here */
}
static inline void release_bus(void) {
/* Nothing to do here */
}
static inline void write_index(uint16_t index) {
GDISP_REG = index;
}
static inline void write_data(uint16_t data) {
GDISP_RAM = data;
}
#if GDISP_HARDWARE_READPIXEL || GDISP_HARDWARE_SCROLL || defined(__DOXYGEN__)
static inline uint16_t read_data(void) {
return GDISP_RAM;
}
#endif
#endif /* _GDISP_LLD_BOARD_H */
/** @} */