ugfx/drivers/gdisp/STM32F429iDiscovery/ili9341.h

98 lines
6.1 KiB
C

/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.org/license.html
*/
#ifndef ILI9341_H
#define ILI9341_H
// ILI9341 commands
#define ILI9341_CMD_NOP 0x00 /**< No operation.*/
#define ILI9341_CMD_RESET 0x01 /**< Software reset.*/
#define ILI9341_GET_ID_INFO 0x04 /**< Get ID information.*/
#define ILI9341_GET_STATUS 0x09 /**< Get status.*/
#define ILI9341_GET_PWR_MODE 0x0A /**< Get power mode.*/
#define ILI9341_GET_MADCTL 0x0B /**< Get MADCTL.*/
#define ILI9341_GET_PIX_FMT 0x0C /**< Get pixel format.*/
#define ILI9341_GET_IMG_FMT 0x0D /**< Get image format.*/
#define ILI9341_GET_SIG_MODE 0x0E /**< Get signal mode.*/
#define ILI9341_GET_SELF_DIAG 0x0F /**< Get self-diagnostics.*/
#define ILI9341_CMD_SLEEP_ON 0x10 /**< Enter sleep mode.*/
#define ILI9341_CMD_SLEEP_OFF 0x11 /**< Exist sleep mode.*/
#define ILI9341_CMD_PARTIAL_ON 0x12 /**< Enter partial mode.*/
#define ILI9341_CMD_PARTIAL_OFF 0x13 /**< Exit partial mode.*/
#define ILI9341_CMD_INVERT_ON 0x20 /**< Enter inverted mode.*/
#define ILI9341_CMD_INVERT_OFF 0x21 /**< Exit inverted mode.*/
#define ILI9341_SET_GAMMA 0x26 /**< Set gamma params.*/
#define ILI9341_CMD_DISPLAY_OFF 0x28 /**< Disable display.*/
#define ILI9341_CMD_DISPLAY_ON 0x29 /**< Enable display.*/
#define ILI9341_SET_COL_ADDR 0x2A /**< Set column address.*/
#define ILI9341_SET_PAGE_ADDR 0x2B /**< Set page address.*/
#define ILI9341_SET_MEM 0x2C /**< Set memory.*/
#define ILI9341_SET_COLOR 0x2D /**< Set color.*/
#define ILI9341_GET_MEM 0x2E /**< Get memory.*/
#define ILI9341_SET_PARTIAL_AREA 0x30 /**< Set partial area.*/
#define ILI9341_SET_VSCROLL 0x33 /**< Set vertical scroll def.*/
#define ILI9341_CMD_TEARING_ON 0x34 /**< Tearing line enabled.*/
#define ILI9341_CMD_TEARING_OFF 0x35 /**< Tearing line disabled.*/
#define ILI9341_SET_MEM_ACS_CTL 0x36 /**< Set mem access ctl.*/
#define ILI9341_SET_VSCROLL_ADDR 0x37 /**< Set vscroll start addr.*/
#define ILI9341_CMD_IDLE_OFF 0x38 /**< Exit idle mode.*/
#define ILI9341_CMD_IDLE_ON 0x39 /**< Enter idle mode.*/
#define ILI9341_SET_PIX_FMT 0x3A /**< Set pixel format.*/
#define ILI9341_SET_MEM_CONT 0x3C /**< Set memory continue.*/
#define ILI9341_GET_MEM_CONT 0x3E /**< Get memory continue.*/
#define ILI9341_SET_TEAR_SCANLINE 0x44 /**< Set tearing scanline.*/
#define ILI9341_GET_TEAR_SCANLINE 0x45 /**< Get tearing scanline.*/
#define ILI9341_SET_BRIGHTNESS 0x51 /**< Set brightness.*/
#define ILI9341_GET_BRIGHTNESS 0x52 /**< Get brightness.*/
#define ILI9341_SET_DISPLAY_CTL 0x53 /**< Set display ctl.*/
#define ILI9341_GET_DISPLAY_CTL 0x54 /**< Get display ctl.*/
#define ILI9341_SET_CABC 0x55 /**< Set CABC.*/
#define ILI9341_GET_CABC 0x56 /**< Get CABC.*/
#define ILI9341_SET_CABC_MIN 0x5E /**< Set CABC min.*/
#define ILI9341_GET_CABC_MIN 0x5F /**< Set CABC max.*/
#define ILI9341_GET_ID1 0xDA /**< Get ID1.*/
#define ILI9341_GET_ID2 0xDB /**< Get ID2.*/
#define ILI9341_GET_ID3 0xDC /**< Get ID3.*/
// ILI9341 extended commands
#define ILI9341_SET_RGB_IF_SIG_CTL 0xB0 /**< RGB IF signal ctl.*/
#define ILI9341_SET_FRAME_CTL_NORMAL 0xB1 /**< Set frame ctl (normal).*/
#define ILI9341_SET_FRAME_CTL_IDLE 0xB2 /**< Set frame ctl (idle).*/
#define ILI9341_SET_FRAME_CTL_PARTIAL 0xB3 /**< Set frame ctl (partial).*/
#define ILI9341_SET_INVERSION_CTL 0xB4 /**< Set inversion ctl.*/
#define ILI9341_SET_BLANKING_PORCH_CTL 0xB5 /**< Set blanking porch ctl.*/
#define ILI9341_SET_FUNCTION_CTL 0xB6 /**< Set function ctl.*/
#define ILI9341_SET_ENTRY_MODE 0xB7 /**< Set entry mode.*/
#define ILI9341_SET_LIGHT_CTL_1 0xB8 /**< Set backlight ctl 1.*/
#define ILI9341_SET_LIGHT_CTL_2 0xB9 /**< Set backlight ctl 2.*/
#define ILI9341_SET_LIGHT_CTL_3 0xBA /**< Set backlight ctl 3.*/
#define ILI9341_SET_LIGHT_CTL_4 0xBB /**< Set backlight ctl 4.*/
#define ILI9341_SET_LIGHT_CTL_5 0xBC /**< Set backlight ctl 5.*/
#define ILI9341_SET_LIGHT_CTL_7 0xBE /**< Set backlight ctl 7.*/
#define ILI9341_SET_LIGHT_CTL_8 0xBF /**< Set backlight ctl 8.*/
#define ILI9341_SET_POWER_CTL_1 0xC0 /**< Set power ctl 1.*/
#define ILI9341_SET_POWER_CTL_2 0xC1 /**< Set power ctl 2.*/
#define ILI9341_SET_VCOM_CTL_1 0xC5 /**< Set VCOM ctl 1.*/
#define ILI9341_SET_VCOM_CTL_2 0xC6 /**< Set VCOM ctl 2.*/
#define ILI9341_SET_NVMEM 0xD0 /**< Set NVMEM data.*/
#define ILI9341_GET_NVMEM_KEY 0xD1 /**< Get NVMEM protect key.*/
#define ILI9341_GET_NVMEM_STATUS 0xD2 /**< Get NVMEM status.*/
#define ILI9341_GET_ID4 0xD3 /**< Get ID4.*/
#define ILI9341_SET_PGAMMA 0xE0 /**< Set positive gamma.*/
#define ILI9341_SET_NGAMMA 0xE1 /**< Set negative gamma.*/
#define ILI9341_SET_DGAMMA_CTL_1 0xE2 /**< Set digital gamma ctl 1.*/
#define ILI9341_SET_DGAMMA_CTL_2 0xE3 /**< Set digital gamma ctl 2.*/
#define ILI9341_SET_IF_CTL 0xF6 /**< Set interface control.*/
// ILI9341 interface modes
#define ILI9341_IM_3LSI_1 0x5 /**< 3-line serial, mode 1.*/
#define ILI9341_IM_3LSI_2 0xD /**< 3-line serial, mode 2.*/
#define ILI9341_IM_4LSI_1 0x6 /**< 4-line serial, mode 1.*/
#define ILI9341_IM_4LSI_2 0xE /**< 4-line serial, mode 2.*/
#endif /* ILI9341_H */