203 lines
5.0 KiB
C
203 lines
5.0 KiB
C
/*
|
|
* This file is subject to the terms of the GFX License, v1.0. If a copy of
|
|
* the license was not distributed with this file, you can obtain one at:
|
|
*
|
|
* http://chibios-gfx.com/license.html
|
|
*/
|
|
|
|
/**
|
|
* @file drivers/gdisp/HX8347D/gdisp_lld_board_embest_dmstf4bb.h
|
|
* @brief GDISP Graphic Driver subsystem board SPI interface for the HX8347D display.
|
|
*
|
|
* @addtogroup GDISP
|
|
* @{
|
|
*/
|
|
|
|
#ifndef _GDISP_LLD_BOARD_H
|
|
#define _GDISP_LLD_BOARD_H
|
|
|
|
#define SET_RST palSetPad(GPIOB, 8);
|
|
#define CLR_RST palClearPad(GPIOB, 8);
|
|
|
|
/* PWM configuration structure. We use timer 4 channel 2 (orange LED on board). */
|
|
static const PWMConfig pwmcfg = {
|
|
1000000, /* 1 MHz PWM clock frequency. */
|
|
100, /* PWM period is 100 cycles. */
|
|
NULL,
|
|
{
|
|
{PWM_OUTPUT_ACTIVE_HIGH, NULL},
|
|
{PWM_OUTPUT_ACTIVE_HIGH, NULL},
|
|
{PWM_OUTPUT_ACTIVE_HIGH, NULL},
|
|
{PWM_OUTPUT_ACTIVE_HIGH, NULL}
|
|
},
|
|
0
|
|
};
|
|
|
|
/*
|
|
* SPI1 configuration structure.
|
|
* Speed 42MHz, CPHA=0, CPOL=0, 8bits frames, MSb transmitted first.
|
|
* The slave select line is the pin 4 on the port GPIOA.
|
|
*/
|
|
static const SPIConfig spi1cfg1 = {
|
|
NULL,
|
|
/* HW dependent part.*/
|
|
GPIOA,
|
|
4,
|
|
0 //SPI_CR1_BR_0
|
|
};
|
|
|
|
/*
|
|
* SPI1 configuration structure.
|
|
* Speed 42MHz, CPHA=0, CPOL=0, 16bits frames, MSb transmitted first.
|
|
* The slave select line is the pin 4 on the port GPIOA.
|
|
*/
|
|
static const SPIConfig spi1cfg2 = {
|
|
NULL,
|
|
/* HW dependent part.*/
|
|
GPIOA,
|
|
4,
|
|
SPI_CR1_DFF //SPI_CR1_BR_0
|
|
};
|
|
|
|
/**
|
|
* @brief Initialise the board for the display.
|
|
* @notes This board definition uses GPIO and assumes exclusive access to these GPIO pins
|
|
*
|
|
* @notapi
|
|
*/
|
|
static inline void init_board(void) {
|
|
|
|
/* Display backlight control */
|
|
/* TIM4 is an alternate function 2 (AF2) */
|
|
pwmStart(&PWMD4, &pwmcfg);
|
|
palSetPadMode(GPIOD, 13, PAL_MODE_ALTERNATE(2));
|
|
pwmEnableChannel(&PWMD4, 1, 100);
|
|
|
|
palSetPadMode(GPIOB, 8, PAL_MODE_OUTPUT_PUSHPULL |
|
|
PAL_STM32_OSPEED_HIGHEST); /* RST */
|
|
palSetPadMode(GPIOB, 9, PAL_MODE_OUTPUT_PUSHPULL |
|
|
PAL_STM32_OSPEED_HIGHEST); /* RS */
|
|
/*
|
|
* Initializes the SPI driver 1. The SPI1 signals are routed as follow:
|
|
* PB12 - NSS.
|
|
* PB13 - SCK.
|
|
* PB14 - MISO.
|
|
* PB15 - MOSI.
|
|
*/
|
|
spiStart(&SPID1, &spi1cfg1);
|
|
palSetPad(GPIOA, 4);
|
|
palSetPadMode(GPIOA, 4, PAL_MODE_OUTPUT_PUSHPULL |
|
|
PAL_STM32_OSPEED_HIGHEST); /* NSS. */
|
|
palSetPadMode(GPIOA, 5, PAL_MODE_ALTERNATE(5) |
|
|
PAL_STM32_OSPEED_HIGHEST); /* SCK. */
|
|
palSetPadMode(GPIOA, 6, PAL_MODE_ALTERNATE(5)); /* MISO. */
|
|
palSetPadMode(GPIOA, 7, PAL_MODE_ALTERNATE(5) |
|
|
PAL_STM32_OSPEED_HIGHEST); /* MOSI. */
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief Set or clear the lcd reset pin.
|
|
*
|
|
* @param[in] state TRUE = lcd in reset, FALSE = normal operation
|
|
*
|
|
* @notapi
|
|
*/
|
|
static inline void setpin_reset(bool_t state) {
|
|
if (state) {
|
|
CLR_RST;
|
|
} else {
|
|
SET_RST;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Set the lcd back-light level.
|
|
*
|
|
* @param[in] percent 0 to 100%
|
|
*
|
|
* @notapi
|
|
*/
|
|
static inline void set_backlight(uint8_t percent) {
|
|
pwmEnableChannel(&PWMD4, 1, percent);
|
|
}
|
|
|
|
/**
|
|
* @brief Take exclusive control of the bus
|
|
* @note Not needed, not implemented
|
|
*
|
|
* @notapi
|
|
*/
|
|
static inline void acquire_bus(void) {
|
|
spiAcquireBus(&SPID1);
|
|
}
|
|
|
|
/**
|
|
* @brief Release exclusive control of the bus
|
|
* @note Not needed, not implemented
|
|
*
|
|
* @notapi
|
|
*/
|
|
static inline void release_bus(void) {
|
|
spiReleaseBus(&SPID1);
|
|
}
|
|
|
|
/**
|
|
* @brief Send data to the index register.
|
|
*
|
|
* @param[in] index The index register to set
|
|
*
|
|
* @notapi
|
|
*/
|
|
static inline void write_index(uint8_t cmd) {
|
|
palClearPad(GPIOB, 9);
|
|
palClearPad(GPIOA, 4);
|
|
while((SPI1->SR & SPI_SR_TXE) == 0);
|
|
SPI1->DR = cmd;
|
|
while(((SPI1->SR & SPI_SR_TXE) == 0) || ((SPI1->SR & SPI_SR_BSY) != 0));
|
|
palSetPad(GPIOB, 9);
|
|
}
|
|
|
|
/**
|
|
* @brief Send data to the lcd.
|
|
*
|
|
* @param[in] data The data to send
|
|
*
|
|
* @notapi
|
|
*/
|
|
static inline void write_data(uint8_t data) {
|
|
SPI1->DR = data;
|
|
while(((SPI1->SR & SPI_SR_TXE) == 0) || ((SPI1->SR & SPI_SR_BSY) != 0));
|
|
palSetPad(GPIOA, 4);
|
|
}
|
|
|
|
static inline void write_ram8(uint8_t data1, uint8_t data2) {
|
|
SPI1->DR = data1;
|
|
while((SPI1->SR & SPI_SR_TXE) == 0);
|
|
SPI1->DR = data2;
|
|
while(((SPI1->SR & SPI_SR_TXE) == 0) || ((SPI1->SR & SPI_SR_BSY) != 0));
|
|
palSetPad(GPIOA, 4);
|
|
}
|
|
|
|
static inline void write_ram16(uint16_t data) {
|
|
while((SPI1->SR & SPI_SR_TXE) == 0);
|
|
SPI1->DR = data;
|
|
}
|
|
|
|
#if GDISP_HARDWARE_READPIXEL || defined(__DOXYGEN__)
|
|
/**
|
|
* @brief Read data from the lcd.
|
|
*
|
|
* @return The data from the lcd
|
|
* @note The chip select may need to be asserted/de-asserted
|
|
* around the actual spi read
|
|
*
|
|
* @notapi
|
|
*/
|
|
static inline uint16_t read_data(void) {
|
|
}
|
|
#endif
|
|
|
|
#endif /* _GDISP_LLD_BOARD_H */
|
|
/** @} */
|