26 lines
935 B
Plaintext
26 lines
935 B
Plaintext
Description:
|
|
|
|
Driver for OLED with 4-wire serial interface and I2C/SPI interface
|
|
|
|
Know restictions:
|
|
- Driver works only with SSD1306 hooked up over I2C or SPI (include corresponding header)
|
|
- Driver is written for 128x64 pixel displays (128x32 are only partly supported and need small further work)
|
|
- Flushing is required for this driver
|
|
|
|
To use this driver:
|
|
|
|
1. Add in your gfxconf.h:
|
|
a) #define GFX_USE_GDISP TRUE
|
|
|
|
b) Any optional high level driver defines (see gdisp.h) eg: GDISP_NEED_MULTITHREAD
|
|
|
|
c) The following are optional - define them if you are not using the defaults below:
|
|
#define GDISP_SCREEN_WIDTH 128
|
|
#define GDISP_SCREEN_HEIGHT 64
|
|
|
|
2. If you are not using a known board then create a gdisp_lld_board.h file according to
|
|
given example files (or just stick with them) and ensure it is on your include path.
|
|
|
|
3. To your makefile add the following lines:
|
|
include $(GFXLIB)/drivers/gdisp/SSD1322/gdisp_lld.mk
|