ugfx/drivers/gdisp/SSD1963/gdisp_lld.c
2012-10-21 01:47:11 +02:00

607 lines
20 KiB
C

/*
ChibiOS/GFX - Copyright (C) 2012
Joel Bodenmann aka Tectu <joel@unormal.org>
This file is part of ChibiOS/GFX.
ChibiOS/GFX is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/GFX is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* @file SSD1963/gdisp_lld.c
* @brief GDISP Graphics Driver subsystem low level driver source.
*
* @addtogroup GDISP
* @{
*/
#include "ch.h"
#include "hal.h"
#include "gdisp.h"
#if GFX_USE_GDISP || defined(__DOXYGEN__)
/* Include the emulation code for things we don't support */
#include "gdisp_emulation.c"
/* All the board specific code should go in these include file so the driver
* can be ported to another board just by creating a suitable file.
*/
//#if defined(BOARD_YOURBOARDNAME)
// #include "gdisp_lld_board_yourboardname.h"
//#else
// /* Include the user supplied board definitions */
// #include "gdisp_lld_board.h"
//#endif
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
#include "ssd1963.h"
#if defined(GDISP_USE_FSMC)
__inline void GDISP_LLD(writeindex)(uint8_t cmd) {
GDISP_REG = cmd;
}
__inline void GDISP_LLD(writereg)(uint16_t lcdReg,uint16_t lcdRegValue) {
GDISP_REG = lcdReg;
GDISP_RAM = lcdRegValue;
}
__inline void GDISP_LLD(writedata)(uint16_t data) {
GDISP_RAM = data;
}
__inline uint16_t GDISP_LLD(readdata)(void) {
return (GDISP_RAM);
}
__inline uint8_t GDISP_LLD(readreg)(uint8_t lcdReg) {
GDISP_REG = lcdReg;
return (GDISP_RAM);
}
__inline void GDISP_LLD(writestreamstart)(void) {
GDISP_LLD(writeindex)(SSD1963_WRITE_MEMORY_START);
}
__inline void GDISP_LLD(readstreamstart)(void) {
GDISP_LLD(writeindex)(SSD1963_READ_MEMORY_START);
}
__inline void GDISP_LLD(writestream)(uint16_t *buffer, uint16_t size) {
uint16_t i;
for(i = 0; i < size; i++)
GDISP_RAM = buffer[i];
}
__inline void GDISP_LLD(readstream)(uint16_t *buffer, size_t size) {
uint16_t i;
for(i = 0; i < size; i++) {
buffer[i] = GDISP_RAM;
}
}
#elif defined(GDISP_USE_GPIO)
__inline void GDISP_LLD(writeindex)(uint8_t cmd) {
Set_CS; Set_RS; Set_WR; Clr_RD;
palWritePort(GDISP_DATA_PORT, cmd);
Clr_CS;
}
__inline void GDISP_LLD(writereg)(uint16_t lcdReg,uint16_t lcdRegValue) {
Set_CS; Set_RS; Set_WR; Clr_RD;
palWritePort(GDISP_DATA_PORT, lcdReg);
Clr_RS;
palWritePort(GDISP_DATA_PORT, lcdRegValue);
Clr_CS;
}
__inline void GDISP_LLD(writedata)(uint16_t data) {
Set_CS; Clr_RS; Set_WR; Clr_RD;
palWritePort(GDISP_DATA_PORT, data);
Clr_CS;
}
__inline uint16_t GDISP_LLD(readdata)(void) {
Set_CS; Clr_RS; Clr_WR; Set_RD;
uint16_t data = palReadPort(GDISP_DATA_PORT);
Clr_CS;
return data;
}
__inline uint8_t GDISP_LLD(readreg)(uint8_t lcdReg) {
Set_CS; Set_RS; Clr_WR; Set_RD;
palWritePort(GDISP_DATA_PORT, lcdReg);
Clr_RS;
uint16_t data = palReadPort(GDISP_DATA_PORT);
Clr_CS;
return data;
}
__inline void GDISP_LLD(writestreamstart)(void) {
GDISP_LLD(writeindex)(SSD1963_WRITE_MEMORY_START);
}
__inline void GDISP_LLD(readstreamstart)(void) {
GDISP_LLD(writeindex)(SSD1963_READ_MEMORY_START);
}
__inline void GDISP_LLD(writestream)(uint16_t *buffer, uint16_t size) {
uint16_t i;
Set_CS; Clr_RS; Set_WR; Clr_RD;
for(i = 0; i < size; i++) {
Set_WR;
palWritePort(GDISP_DATA_PORT, buffer[i]);
Clr_WR;
}
Clr_CS;
}
__inline void GDISP_LLD(readstream)(uint16_t *buffer, size_t size) {
uint16_t i;
Set_CS; Clr_RS; Clr_WR; Set_RD;
for(i = 0; i < size; i++) {
Set_RD;
buffer[i] = palReadPort(GDISP_DATA_PORT);
Clr_RD;
}
}
#endif
/* ---- Required Routines ---- */
/*
The following 2 routines are required.
All other routines are optional.
*/
/**
* @brief Low level GDISP driver initialisation.
* @return TRUE if successful, FALSE on error.
*
* @notapi
*/
bool_t GDISP_LLD(init)(void) {
/* Initialise the display */
#if defined(GDISP_USE_FSMC)
#if defined(STM32F1XX) || defined(STM32F3XX)
/* FSMC setup for F1/F3 */
rccEnableAHB(RCC_AHBENR_FSMCEN, 0);
#if defined(GDISP_USE_DMA) && defined(GDISP_DMA_STREAM)
#error "DMA not implemented for F1/F3 Devices"
#endif
#elif defined(STM32F4XX) || defined(STM32F2XX)
/* STM32F2-F4 FSMC init */
rccEnableAHB3(RCC_AHB3ENR_FSMCEN, 0);
#if defined(GDISP_USE_DMA) && defined(GDISP_DMA_STREAM)
if (dmaStreamAllocate(GDISP_DMA_STREAM, 0, NULL, NULL)) chSysHalt();
dmaStreamSetMemory0(GDISP_DMA_STREAM, &GDISP_RAM);
dmaStreamSetMode(GDISP_DMA_STREAM, STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_DIR_M2M);
#endif
#else
#error "FSMC not implemented for this device"
#endif
/* set pins to FSMC mode */
IOBus busD = {GPIOD, (1 << 0) | (1 << 1) | (1 << 4) | (1 << 5) | (1 << 7) | (1 << 8) |
(1 << 9) | (1 << 10) | (1 << 11) | (1 << 14) | (1 << 15), 0};
IOBus busE = {GPIOE, (1 << 7) | (1 << 8) | (1 << 9) | (1 << 10) | (1 << 11) | (1 << 12) |
(1 << 13) | (1 << 14) | (1 << 15), 0};
palSetBusMode(&busD, PAL_MODE_ALTERNATE(12));
palSetBusMode(&busE, PAL_MODE_ALTERNATE(12));
const unsigned char FSMC_Bank = 0;
/* FSMC timing */
FSMC_Bank1->BTCR[FSMC_Bank+1] = (FSMC_BTR1_ADDSET_1 | FSMC_BTR1_ADDSET_3) \
| (FSMC_BTR1_DATAST_1 | FSMC_BTR1_DATAST_3) \
| (FSMC_BTR1_BUSTURN_1 | FSMC_BTR1_BUSTURN_3) ;
/* Bank1 NOR/SRAM control register configuration
* This is actually not needed as already set by default after reset */
FSMC_Bank1->BTCR[FSMC_Bank] = FSMC_BCR1_MWID_0 | FSMC_BCR1_WREN | FSMC_BCR1_MBKEN;
#elif defined(GDISP_USE_GPIO)
IOBus busCMD = {GDISP_CMD_PORT, (1 << GDISP_CS) | (1 << GDISP_RS) | (1 << GDISP_WR) | (1 << GDISP_RD), 0};
IOBus busDATA = {GDISP_CMD_PORT, 0xFFFFF, 0};
palSetBusMode(&busCMD, PAL_MODE_OUTPUT_PUSHPULL);
palSetBusMode(&busDATA, PAL_MODE_OUTPUT_PUSHPULL);
#else
#error "Please define GDISP_USE_FSMC or GDISP_USE_GPIO"
#endif
GDISP_LLD(writeindex)(SSD1963_SOFT_RESET);
chThdSleepMicroseconds(100);
/* Driver PLL config */
GDISP_LLD(writeindex)(SSD1963_SET_PLL_MN);
GDISP_LLD(writedata)(35); // PLLclk = REFclk (10Mhz) * 36 (360Mhz)
GDISP_LLD(writedata)(2); // SYSclk = PLLclk / 3 (120MHz)
GDISP_LLD(writedata)(4); // Apply calculation bit, else it is ignored
GDISP_LLD(writeindex)(SSD1963_SET_PLL); // Enable PLL
GDISP_LLD(writedata)(0x01);
chThdSleepMicroseconds(200);
GDISP_LLD(writeindex)(SSD1963_SET_PLL); // Use PLL
GDISP_LLD(writedata)(0x03);
chThdSleepMicroseconds(200);
GDISP_LLD(writeindex)(SSD1963_SOFT_RESET);
chThdSleepMicroseconds(100);
/* Screen size */
GDISP_LLD(writeindex)(SSD1963_SET_GDISP_MODE);
// GDISP_LLD(writedata)(0x0000);
GDISP_LLD(writedata)(0b00011000); //Enabled dithering
GDISP_LLD(writedata)(0x0000);
GDISP_LLD(writedata)(mHIGH((GDISP_SCREEN_WIDTH+1)));
GDISP_LLD(writedata)((GDISP_SCREEN_WIDTH+1));
GDISP_LLD(writedata)(mHIGH((GDISP_SCREEN_HEIGHT+1)));
GDISP_LLD(writedata)((GDISP_SCREEN_HEIGHT+1));
GDISP_LLD(writedata)(0x0000);
GDISP_LLD(writeindex)(SSD1963_SET_PIXEL_DATA_INTERFACE);
GDISP_LLD(writedata)(SSD1963_PDI_16BIT565);
/* LCD Clock specs */
GDISP_LLD(writeindex)(SSD1963_SET_LSHIFT_FREQ);
GDISP_LLD(writedata)((GDISP_FPR >> 16) & 0xFF);
GDISP_LLD(writedata)((GDISP_FPR >> 8) & 0xFF);
GDISP_LLD(writedata)(GDISP_FPR & 0xFF);
GDISP_LLD(writeindex)(SSD1963_SET_HORI_PERIOD);
GDISP_LLD(writedata)(mHIGH(SCREEN_HSYNC_PERIOD));
GDISP_LLD(writedata)(mLOW(SCREEN_HSYNC_PERIOD));
GDISP_LLD(writedata)(mHIGH((SCREEN_HSYNC_PULSE + SCREEN_HSYNC_BACK_PORCH)));
GDISP_LLD(writedata)(mLOW((SCREEN_HSYNC_PULSE + SCREEN_HSYNC_BACK_PORCH)));
GDISP_LLD(writedata)(SCREEN_HSYNC_PULSE);
GDISP_LLD(writedata)(0x00);
GDISP_LLD(writedata)(0x00);
GDISP_LLD(writedata)(0x00);
GDISP_LLD(writeindex)(SSD1963_SET_VERT_PERIOD);
GDISP_LLD(writedata)(mHIGH(SCREEN_VSYNC_PERIOD));
GDISP_LLD(writedata)(mLOW(SCREEN_VSYNC_PERIOD));
GDISP_LLD(writedata)(mHIGH((SCREEN_VSYNC_PULSE + SCREEN_VSYNC_BACK_PORCH)));
GDISP_LLD(writedata)(mLOW((SCREEN_VSYNC_PULSE + SCREEN_VSYNC_BACK_PORCH)));
GDISP_LLD(writedata)(SCREEN_VSYNC_PULSE);
GDISP_LLD(writedata)(0x00);
GDISP_LLD(writedata)(0x00);
/* Tear effect indicator ON. This is used to tell the host MCU when the driver is not refreshing the panel */
GDISP_LLD(writeindex)(SSD1963_SET_TEAR_ON);
GDISP_LLD(writedata)(0x0000);
/* Turn on */
GDISP_LLD(writeindex)(SSD1963_SET_DISPLAY_ON);
#if defined(GDISP_USE_FSMC)
/* FSMC delay reduced as the controller now runs at full speed */
FSMC_Bank1->BTCR[FSMC_Bank+1] = FSMC_BTR1_ADDSET_0 | FSMC_BTR1_DATAST_2 | FSMC_BTR1_BUSTURN_0 ;
FSMC_Bank1->BTCR[FSMC_Bank] = FSMC_BCR1_MWID_0 | FSMC_BCR1_WREN | FSMC_BCR1_MBKEN;
#endif
/* Initialise the GDISP structure to match */
GDISP.Width = GDISP_SCREEN_WIDTH;
GDISP.Height = GDISP_SCREEN_HEIGHT;
GDISP.Orientation = GDISP_ROTATE_0;
GDISP.Powermode = powerOn;
GDISP.Backlight = 100;
GDISP.Contrast = 50;
#if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP
GDISP.clipx0 = 0;
GDISP.clipy0 = 0;
GDISP.clipx1 = GDISP.Width;
GDISP.clipy1 = GDISP.Height;
#endif
return TRUE;
}
void GDISP_LLD(setwindow)(coord_t x0, coord_t y0, coord_t x1, coord_t y1) {
/* We don't need to validate here as the LLD routines will validate first.
*
* #if GDISP_NEED_VALIDATION
* if (x0 >= GDISP.Width || y0 >= GDISP.Height || x0 < 0 || y0 < 0) return;
* else if (x1 >= GDISP.Width || y1 >= GDISP.Height || y1 < 0 || y2 < 0) return;
* #endif
*/
GDISP_LLD(writeindex)(SSD1963_SET_PAGE_ADDRESS);
GDISP_LLD(writedata)((y0 >> 8) & 0xFF);
GDISP_LLD(writedata)((y0 >> 0) & 0xFF);
GDISP_LLD(writedata)((y1 >> 8) & 0xFF);
GDISP_LLD(writedata)((y1 >> 0) & 0xFF);
GDISP_LLD(writeindex)(SSD1963_SET_COLUMN_ADDRESS);
GDISP_LLD(writedata)((x0 >> 8) & 0xFF);
GDISP_LLD(writedata)((x0 >> 0) & 0xFF);
GDISP_LLD(writedata)((x1 >> 8) & 0xFF);
GDISP_LLD(writedata)((x1 >> 0) & 0xFF);
}
/**
* @brief Draws a pixel on the display.
*
* @param[in] x X location of the pixel
* @param[in] y Y location of the pixel
* @param[in] color The color of the pixel
*
* @notapi
*/
void GDISP_LLD(drawpixel)(coord_t x, coord_t y, color_t color) {
#if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP
if (x < GDISP.clipx0 || y < GDISP.clipy0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return;
#endif
GDISP_LLD(setwindow)(x, y, x, y);
GDISP_LLD(writestreamstart)();
GDISP_LLD(writedata)(color);
}
/* ---- Optional Routines ---- */
#if GDISP_HARDWARE_FILLS || defined(__DOXYGEN__)
/**
* @brief Fill an area with a color.
* @note Optional - The high level driver can emulate using software.
*
* @param[in] x, y The start filled area
* @param[in] cx, cy The width and height to be filled
* @param[in] color The color of the fill
*
* @notapi
*/
void GDISP_LLD(fillarea)(coord_t x, coord_t y, coord_t cx, coord_t cy, color_t color) {
#if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP
if (x < GDISP.clipx0) { cx -= GDISP.clipx0 - x; x = GDISP.clipx0; }
if (y < GDISP.clipy0) { cy -= GDISP.clipy0 - y; y = GDISP.clipy0; }
if (cx <= 0 || cy <= 0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return;
if (x+cx > GDISP.clipx1) cx = GDISP.clipx1 - x;
if (y+cy > GDISP.clipy1) cy = GDISP.clipy1 - y;
#endif
uint32_t area;
area = cx*cy;
GDISP_LLD(setwindow)(x, y, x+cx-1, y+cy-1);
GDISP_LLD(writestreamstart)();
#if defined(GDISP_USE_FSMC) && defined(GDISP_USE_DMA) && defined(GDISP_DMA_STREAM)
uint8_t i;
dmaStreamSetPeripheral(GDISP_DMA_STREAM, &color);
dmaStreamSetMode(GDISP_DMA_STREAM, STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_DIR_M2M);
for (i = area/65535; i; i--) {
dmaStreamSetTransactionSize(GDISP_DMA_STREAM, 65535);
dmaStreamEnable(GDISP_DMA_STREAM);
dmaWaitCompletion(GDISP_DMA_STREAM);
}
dmaStreamSetTransactionSize(GDISP_DMA_STREAM, area%65535);
dmaStreamEnable(GDISP_DMA_STREAM);
dmaWaitCompletion(GDISP_DMA_STREAM);
#else
uint32_t index;
for(index = 0; index < area; index++)
GDISP_LLD(writedata)(color);
#endif //#ifdef GDISP_USE_DMA
}
#endif
#if GDISP_HARDWARE_BITFILLS || defined(__DOXYGEN__)
/**
* @brief Fill an area with a bitmap.
* @note Optional - The high level driver can emulate using software.
*
* @param[in] x, y The start filled area
* @param[in] cx, cy The width and height to be filled
* @param[in] srcx, srcy The bitmap position to start the fill from
* @param[in] srccx The width of a line in the bitmap.
* @param[in] buffer The pixels to use to fill the area.
*
* @notapi
*/
void GDISP_LLD(blitareaex)(coord_t x, coord_t y, coord_t cx, coord_t cy, coord_t srcx, coord_t srcy, coord_t srccx, const pixel_t *buffer) {
#if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP
if (x < GDISP.clipx0) { cx -= GDISP.clipx0 - x; srcx += GDISP.clipx0 - x; x = GDISP.clipx0; }
if (y < GDISP.clipy0) { cy -= GDISP.clipy0 - y; srcy += GDISP.clipy0 - y; y = GDISP.clipy0; }
if (srcx+cx > srccx) cx = srccx - srcx;
if (cx <= 0 || cy <= 0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return;
if (x+cx > GDISP.clipx1) cx = GDISP.clipx1 - x;
if (y+cy > GDISP.clipy1) cy = GDISP.clipy1 - y;
#endif
GDISP_LLD(setwindow)(x, y, x+cx-1, y+cy-1);
GDISP_LLD(writestreamstart)();
buffer += srcx + srcy * srccx;
#if defined(GDISP_USE_FSMC) && defined(GDISP_USE_DMA) && defined(GDISP_DMA_STREAM)
uint32_t area = cx*cy;
uint8_t i;
dmaStreamSetPeripheral(GDISP_DMA_STREAM, buffer);
dmaStreamSetMode(GDISP_DMA_STREAM, STM32_DMA_CR_PL(0) | STM32_DMA_CR_PINC | STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_DIR_M2M);
for (i = area/65535; i; i--) {
dmaStreamSetTransactionSize(GDISP_DMA_STREAM, 65535);
dmaStreamEnable(GDISP_DMA_STREAM);
dmaWaitCompletion(GDISP_DMA_STREAM);
}
dmaStreamSetTransactionSize(GDISP_DMA_STREAM, area%65535);
dmaStreamEnable(GDISP_DMA_STREAM);
dmaWaitCompletion(GDISP_DMA_STREAM);
#else
coord_t endx, endy;
unsigned lg;
endx = srcx + cx;
endy = y + cy;
lg = srccx - cx;
for(; y < endy; y++, buffer += lg)
for(x=srcx; x < endx; x++)
GDISP_LLD(writedata)(*buffer++);
#endif //#ifdef GDISP_USE_DMA
}
#endif
#if (GDISP_NEED_SCROLL && GDISP_HARDWARE_SCROLL) || defined(__DOXYGEN__)
/**
* @brief Scroll vertically a section of the screen.
* @note Optional.
* @note If x,y + cx,cy is off the screen, the result is undefined.
* @note If lines is >= cy, it is equivelent to a area fill with bgcolor.
*
* @param[in] x, y The start of the area to be scrolled
* @param[in] cx, cy The size of the area to be scrolled
* @param[in] lines The number of lines to scroll (Can be positive or negative)
* @param[in] bgcolor The color to fill the newly exposed area.
*
* @notapi
*/
void GDISP_LLD(verticalscroll)(coord_t x, coord_t y, coord_t cx, coord_t cy, int lines, color_t bgcolor) {
#if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP
if (x < GDISP.clipx0) { cx -= GDISP.clipx0 - x; x = GDISP.clipx0; }
if (y < GDISP.clipy0) { cy -= GDISP.clipy0 - y; y = GDISP.clipy0; }
if (!lines || cx <= 0 || cy <= 0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return;
if (x+cx > GDISP.clipx1) cx = GDISP.clipx1 - x;
if (y+cy > GDISP.clipy1) cy = GDISP.clipy1 - y;
#endif
/* NOT IMPLEMENTED YET */
/*
uint16_t size = x1 - x0 ;
lld_lcdWriteIndex(SSD1963_SET_SCROLL_AREA);
lld_lcdWriteData((x0 >> 8) & 0xFF);
lld_lcdWriteData((x0 >> 0) & 0xFF);
lld_lcdWriteData((size >> 8) & 0xFF);
lld_lcdWriteData((size >> 0) & 0xFF);
lld_lcdWriteData(((lcd_height-x1) >> 8) & 0xFF);
lld_lcdWriteData(((lcd_height-x1) >> 0) & 0xFF);
lld_lcdWriteIndex(SSD1963_SET_SCROLL_START);
lld_lcdWriteData((lines >> 8) & 0xFF);
lld_lcdWriteData((lines >> 0) & 0xFF);
*/
}
#endif
#if (GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL) || defined(__DOXYGEN__)
/**
* @brief Driver Control
* @detail Unsupported control codes are ignored.
* @note The value parameter should always be typecast to (void *).
* @note There are some predefined and some specific to the low level driver.
* @note GDISP_CONTROL_POWER - Takes a gdisp_powermode_t
* GDISP_CONTROL_ORIENTATION - Takes a gdisp_orientation_t
* GDISP_CONTROL_BACKLIGHT - Takes an int from 0 to 100. For a driver
* that only supports off/on anything other
* than zero is on.
* GDISP_CONTROL_CONTRAST - Takes an int from 0 to 100.
* GDISP_CONTROL_LLD - Low level driver control constants start at
* this value.
*
* @param[in] what What to do.
* @param[in] value The value to use (always cast to a void *).
*
* @notapi
*/
void GDISP_LLD(control)(unsigned what, void *value) {
/* NOT IMPLEMENTED YET */
switch(what) {
case GDISP_CONTROL_POWER:
if (GDISP.Powermode == (gdisp_powermode_t)value)
return;
switch((gdisp_powermode_t)value) {
case powerOff:
GDISP_LLD(writeindex)(SSD1963_EXIT_SLEEP_MODE); // leave sleep mode
chThdSleepMicroseconds(5000);
GDISP_LLD(writeindex)(SSD1963_SET_DISPLAY_OFF);
GDISP_LLD(writeindex)(SSD1963_SET_DEEP_SLEEP); // enter deep sleep mode
break;
case powerOn:
GDISP_LLD(readreg)(0x0000); chThdSleepMicroseconds(5000); // 2x Dummy reads to wake up from deep sleep
GDISP_LLD(readreg)(0x0000); chThdSleepMicroseconds(5000);
if (GDISP.Powermode != powerSleep)
GDISP_LLD(init)();
GDISP_LLD(writeindex)(SSD1963_SET_DISPLAY_ON);
break;
case powerSleep:
GDISP_LLD(writeindex)(SSD1963_SET_DISPLAY_OFF);
GDISP_LLD(writeindex)(SSD1963_ENTER_SLEEP_MODE); // enter sleep mode
chThdSleepMicroseconds(5000);
break;
default:
return;
}
GDISP.Powermode = (gdisp_powermode_t)value;
return;
case GDISP_CONTROL_ORIENTATION:
if (GDISP.Orientation == (gdisp_orientation_t)value)
return;
switch((gdisp_orientation_t)value) {
case GDISP_ROTATE_0:
/* Code here */
GDISP.Height = GDISP_SCREEN_HEIGHT;
GDISP.Width = GDISP_SCREEN_WIDTH;
break;
case GDISP_ROTATE_90:
/* Code here */
GDISP.Height = GDISP_SCREEN_WIDTH;
GDISP.Width = GDISP_SCREEN_HEIGHT;
break;
case GDISP_ROTATE_180:
/* Code here */
GDISP.Height = GDISP_SCREEN_HEIGHT;
GDISP.Width = GDISP_SCREEN_WIDTH;
break;
case GDISP_ROTATE_270:
/* Code here */
GDISP.Height = GDISP_SCREEN_WIDTH;
GDISP.Width = GDISP_SCREEN_HEIGHT;
break;
default:
return;
}
#if GDISP_NEED_CLIP || GDISP_NEED_VALIDATION
GDISP.clipx0 = 0;
GDISP.clipy0 = 0;
GDISP.clipx1 = GDISP.Width;
GDISP.clipy1 = GDISP.Height;
#endif
GDISP.Orientation = (gdisp_orientation_t)value;
return;
/*
case GDISP_CONTROL_BACKLIGHT:
case GDISP_CONTROL_CONTRAST:
*/
}
}
#endif
#endif /* GFX_USE_GDISP */
/** @} */