172 lines
4.1 KiB
C
172 lines
4.1 KiB
C
/*
|
|
* This file is subject to the terms of the GFX License. If a copy of
|
|
* the license was not distributed with this file, you can obtain one at:
|
|
*
|
|
* http://chibios-gfx.com/license.html
|
|
*/
|
|
|
|
/**
|
|
* @file drivers/gdisp/SSD1963/gdisp_lld_board_example_gpio.h
|
|
* @brief GDISP Graphic Driver subsystem board interface for the SSD1963 display.
|
|
*
|
|
* @addtogroup GDISP
|
|
* @{
|
|
*/
|
|
|
|
#ifndef _GDISP_LLD_BOARD_H
|
|
#define _GDISP_LLD_BOARD_H
|
|
|
|
#if defined(GDISP_USE_GPIO)
|
|
#define Set_CS palSetPad(GDISP_CMD_PORT, GDISP_CS);
|
|
#define Clr_CS palClearPad(GDISP_CMD_PORT, GDISP_CS);
|
|
#define Set_RS palSetPad(GDISP_CMD_PORT, GDISP_RS);
|
|
#define Clr_RS palClearPad(GDISP_CMD_PORT, GDISP_RS);
|
|
#define Set_WR palSetPad(GDISP_CMD_PORT, GDISP_WR);
|
|
#define Clr_WR palClearPad(GDISP_CMD_PORT, GDISP_WR);
|
|
#define Set_RD palSetPad(GDISP_CMD_PORT, GDISP_RD);
|
|
#define Clr_RD palClearPad(GDISP_CMD_PORT, GDISP_RD);
|
|
#endif
|
|
|
|
#if defined(GDISP_USE_FSMC)
|
|
/* Using FSMC A16 as RS */
|
|
#define GDISP_REG (*((volatile uint16_t *) 0x60000000)) /* RS = 0 */
|
|
#define GDISP_RAM (*((volatile uint16_t *) 0x60020000)) /* RS = 1 */
|
|
#endif
|
|
|
|
/**
|
|
* @brief Send data to the index register.
|
|
*
|
|
* @param[in] index The index register to set
|
|
*
|
|
* @notapi
|
|
*/
|
|
static inline void write_index(uint16_t index) {
|
|
Set_CS; Set_RS; Set_WR; Clr_RD;
|
|
palWritePort(GDISP_DATA_PORT, index);
|
|
Clr_CS;
|
|
}
|
|
|
|
/**
|
|
* @brief Send data to the lcd.
|
|
*
|
|
* @param[in] data The data to send
|
|
*
|
|
* @notapi
|
|
*/
|
|
static inline void write_data(uint16_t data) {
|
|
Set_CS; Clr_RS; Set_WR; Clr_RD;
|
|
palWritePort(GDISP_DATA_PORT, data);
|
|
Clr_CS;
|
|
}
|
|
|
|
/**
|
|
* @brief Initialise the board for the display.
|
|
*
|
|
* @notapi
|
|
*/
|
|
static inline void init_board(void) {
|
|
|
|
IOBus busCMD = {GDISP_CMD_PORT, (1 << GDISP_CS) | (1 << GDISP_RS) | (1 << GDISP_WR) | (1 << GDISP_RD), 0};
|
|
IOBus busDATA = {GDISP_CMD_PORT, 0xFFFFF, 0};
|
|
palSetBusMode(&busCMD, PAL_MODE_OUTPUT_PUSHPULL);
|
|
palSetBusMode(&busDATA, PAL_MODE_OUTPUT_PUSHPULL);
|
|
}
|
|
|
|
static inline void post_init_board(void) {
|
|
/* Nothing to do here */
|
|
}
|
|
|
|
/**
|
|
* @brief Set or clear the lcd reset pin.
|
|
*
|
|
* @param[in] state TRUE = lcd in reset, FALSE = normal operation
|
|
*
|
|
* @notapi
|
|
*/
|
|
static inline void setpin_reset(bool_t state) {
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief Set the lcd back-light level.
|
|
*
|
|
* @param[in] percent 0 to 100%
|
|
*
|
|
* @notapi
|
|
*/
|
|
static inline void set_backlight(uint8_t percent) {
|
|
//duty_cycle is 00..FF
|
|
//Work in progress: the SSD1963 has a built-in PWM, its output can
|
|
//be used by a Dynamic Background Control or by a host (user)
|
|
//Check your LCD's hardware, the PWM connection is default left open and instead
|
|
//connected to a LED connection on the breakout board
|
|
write_index(SSD1963_SET_PWM_CONF);//set PWM for BackLight
|
|
write_data(0x0001);
|
|
write_data(percent & 0x00FF);
|
|
write_data(0x0001);//controlled by host (not DBC), enabled
|
|
write_data(0x00FF);
|
|
write_data(0x0060);//don't let it go too dark, avoid a useless LCD
|
|
write_data(0x000F);//prescaler ???
|
|
}
|
|
|
|
/**
|
|
* @brief Take exclusive control of the bus
|
|
*
|
|
* @notapi
|
|
*/
|
|
static inline void acquire_bus(void) {
|
|
/* Nothing to do here */
|
|
}
|
|
|
|
/**
|
|
* @brief Release exclusive control of the bus
|
|
*
|
|
* @notapi
|
|
*/
|
|
static inline void release_bus(void) {
|
|
/* Nothing to do here */
|
|
}
|
|
|
|
__inline void write_stream(uint16_t *buffer, uint16_t size) {
|
|
uint16_t i;
|
|
Set_CS; Clr_RS; Set_WR; Clr_RD;
|
|
for(i = 0; i < size; i++) {
|
|
Set_WR;
|
|
palWritePort(GDISP_DATA_PORT, buffer[i]);
|
|
Clr_WR;
|
|
}
|
|
Clr_CS;
|
|
}
|
|
|
|
__inline void read_stream(uint16_t *buffer, size_t size) {
|
|
uint16_t i;
|
|
Set_CS; Clr_RS; Clr_WR; Set_RD;
|
|
for(i = 0; i < size; i++) {
|
|
Set_RD;
|
|
buffer[i] = palReadPort(GDISP_DATA_PORT);
|
|
Clr_RD;
|
|
}
|
|
}
|
|
|
|
#if GDISP_HARDWARE_READPIXEL || GDISP_HARDWARE_SCROLL || defined(__DOXYGEN__)
|
|
/**
|
|
* @brief Read data from the lcd.
|
|
*
|
|
* @return The data from the lcd
|
|
* @note The chip select may need to be asserted/de-asserted
|
|
* around the actual spi read
|
|
*
|
|
* @notapi
|
|
*/
|
|
static inline uint16_t read_data(void) {
|
|
Set_CS; Clr_RS; Clr_WR; Set_RD;
|
|
uint16_t data = palReadPort(GDISP_DATA_PORT);
|
|
Clr_CS;
|
|
return data;
|
|
}
|
|
#endif
|
|
|
|
#endif /* _GDISP_LLD_BOARD_H */
|
|
/** @} */
|
|
|