ugfx/boards/base/Mikromedia-STM32-M4-ILI9341/example/Makefile

233 lines
6.1 KiB
Makefile

##############################################################################
# Build global options
# NOTE: Can be overridden externally.
#
# Compiler options here.
ifeq ($(USE_OPT),)
# Replace -O0 with -O2 for a production build. -O2 just messes with the debugger.
USE_OPT = -O0 -g -fomit-frame-pointer -falign-functions=16
endif
# C specific options here (added to USE_OPT).
ifeq ($(USE_COPT),)
USE_COPT =
endif
# C++ specific options here (added to USE_OPT).
ifeq ($(USE_CPPOPT),)
USE_CPPOPT = -fno-rtti
endif
# Enable this if you want the linker to remove unused code and data
ifeq ($(USE_LINK_GC),)
USE_LINK_GC = yes
endif
# If enabled, this option allows to compile the application in THUMB mode.
ifeq ($(USE_THUMB),)
USE_THUMB = yes
endif
# Enable this if you want to see the full log while compiling.
ifeq ($(USE_VERBOSE_COMPILE),)
USE_VERBOSE_COMPILE = no
endif
#
# Build global options
##############################################################################
##############################################################################
# Architecture or project specific options
#
# Enables the use of FPU on Cortex-M4.
# Enable this if you really want to use the STM FWLib.
ifeq ($(USE_FPU),)
USE_FPU = no
endif
# Enable this if you really want to use the STM FWLib.
ifeq ($(USE_FWLIB),)
USE_FWLIB = no
endif
#
# Architecture or project specific options
##############################################################################
##############################################################################
# Project, sources and paths
#
SW = ..
# Define project name here
PROJECT = ch
# Imported source files and paths
CHIBIOS = ../ChibiOS
#include $(CHIBIOS)/boards/MIKROMEDIA_STM32_M4/board.mk # Not a standard ChibiOS supported board
include $(CHIBIOS)/os/hal/platforms/STM32F4xx/platform.mk
include $(CHIBIOS)/os/hal/hal.mk
include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F4xx/port.mk
include $(CHIBIOS)/os/kernel/kernel.mk
LDSCRIPT= $(PORTLD)/STM32F407xG.ld
# Imported source files and paths for uGFX
GFXLIB = ../uGFX
include $(GFXLIB)/boards/base/Mikromedia-STM32-M4-ILI9341/board.mk
include $(GFXLIB)/boards/base/Mikromedia-STM32-M4-ILI9341/ChibiOS_Board/board.mk # The replacement ChibiOS board files
include $(GFXLIB)/gfx.mk
# Where is our source code - alter these for your project.
MYFILES = $(GFXLIB)/demos/modules/gdisp/basics
MYCSRC = $(MYFILES)/main.c
# C sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
CSRC = $(PORTSRC) \
$(KERNSRC) \
$(TESTSRC) \
$(HALSRC) \
$(PLATFORMSRC) \
$(BOARDSRC) \
$(GFXSRC) \
$(MYCSRC)
# C++ sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
CPPSRC =
# C sources to be compiled in ARM mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
# option that results in lower performance and larger code size.
ACSRC =
# C++ sources to be compiled in ARM mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
# option that results in lower performance and larger code size.
ACPPSRC =
# C sources to be compiled in THUMB mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
# option that results in lower performance and larger code size.
TCSRC =
# C sources to be compiled in THUMB mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
# option that results in lower performance and larger code size.
TCPPSRC =
# List ASM source files here
ASMSRC = $(PORTASM)
INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \
$(HALINC) $(PLATFORMINC) $(BOARDINC) \
$(GFXINC) \
$(MYFILES)
#
# Project, sources and paths
##############################################################################
##############################################################################
# Compiler settings
#
MCU = cortex-m4
#TRGT = arm-elf-
TRGT = arm-none-eabi-
CC = $(TRGT)gcc
CPPC = $(TRGT)g++
# Enable loading with g++ only if you need C++ runtime support.
# NOTE: You can use C++ even without C++ support if you are careful. C++
# runtime support makes code size explode.
LD = $(TRGT)gcc
#LD = $(TRGT)g++
CP = $(TRGT)objcopy
AS = $(TRGT)gcc -x assembler-with-cpp
OD = $(TRGT)objdump
HEX = $(CP) -O ihex
BIN = $(CP) -O binary
# ARM-specific options here
AOPT =
# THUMB-specific options here
TOPT = -mthumb -DTHUMB
# Define C warning options here
CWARN = -Wall -Wextra -Wstrict-prototypes
# Define C++ warning options here
CPPWARN = -Wall -Wextra
#
# Compiler settings
##############################################################################
##############################################################################
# Start of default section
#
# List all default C defines here, like -D_DEBUG=1
DDEFS = $(GFXDEFS)
# List all default ASM defines here, like -D_DEBUG=1
DADEFS =
# List all default directories to look for include files here
DINCDIR =
# List the default directory to look for the libraries here
DLIBDIR =
# List all default libraries here
DLIBS =
#
# End of default section
##############################################################################
##############################################################################
# Start of user section
#
# List all user C define here, like -D_DEBUG=1
UDEFS =
# Define ASM defines here
UADEFS =
# List all user directories here
UINCDIR =
# List the user directory to look for the libraries here
ULIBDIR =
# List all user libraries here
ULIBS =
#
# End of user defines
##############################################################################
ifeq ($(USE_FPU),yes)
USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant
DDEFS += -DCORTEX_USE_FPU=TRUE
else
DDEFS += -DCORTEX_USE_FPU=FALSE
endif
ifeq ($(USE_FWLIB),yes)
include $(CHIBIOS)/ext/stm32lib/stm32lib.mk
CSRC += $(STM32SRC)
INCDIR += $(STM32INC)
USE_OPT += -DUSE_STDPERIPH_DRIVER
endif
include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk