97 lines
2.6 KiB
C
97 lines
2.6 KiB
C
/*
|
|
* This file is subject to the terms of the GFX License. If a copy of
|
|
* the license was not distributed with this file, you can obtain one at:
|
|
*
|
|
* http://ugfx.org/license.html
|
|
*/
|
|
|
|
#ifndef _LLD_GMOUSE_MCU_BOARD_H
|
|
#define _LLD_GMOUSE_MCU_BOARD_H
|
|
|
|
// We directly define the jitter settings
|
|
#define GMOUSE_MCU_PEN_CALIBRATE_ERROR 8
|
|
#define GMOUSE_MCU_PEN_CLICK_ERROR 4
|
|
#define GMOUSE_MCU_PEN_MOVE_ERROR 4
|
|
#define GMOUSE_MCU_FINGER_CALIBRATE_ERROR 14
|
|
#define GMOUSE_MCU_FINGER_CLICK_ERROR 8
|
|
#define GMOUSE_MCU_FINGER_MOVE_ERROR 8
|
|
|
|
// Now board specific settings...
|
|
|
|
#define ADC_NUM_CHANNELS 2
|
|
#define ADC_BUF_DEPTH 1
|
|
|
|
static const ADCConversionGroup adcgrpcfg = {
|
|
FALSE,
|
|
ADC_NUM_CHANNELS,
|
|
0,
|
|
0,
|
|
/* HW dependent part.*/
|
|
0,
|
|
ADC_CR2_SWSTART,
|
|
0,
|
|
0,
|
|
ADC_SQR1_NUM_CH(ADC_NUM_CHANNELS),
|
|
0,
|
|
ADC_SQR3_SQ2_N(ADC_CHANNEL_IN8) | ADC_SQR3_SQ1_N(ADC_CHANNEL_IN9)
|
|
};
|
|
|
|
#define BOARD_DATA_SIZE 0 // How many extra bytes to add on the end of the mouse structure for the board's use
|
|
|
|
#define Z_MIN 0 // The minimum Z reading
|
|
#define Z_MAX 4095 // The maximum Z reading (12 bits)
|
|
#define Z_TOUCHON 4000 // Values between this and Z_MAX are definitely pressed
|
|
#define Z_TOUCHOFF 400 // Values between this and Z_MIN are definitely not pressed
|
|
|
|
static bool_t init_board(GMouse *m, unsigned driverinstance) {
|
|
(void) m;
|
|
|
|
// Only one touch interface on this board
|
|
if (driverinstance)
|
|
return FALSE;
|
|
|
|
adcStart(&ADCD1, 0);
|
|
|
|
// Set up for reading Z
|
|
palClearPad(GPIOB, GPIOB_DRIVEA);
|
|
palClearPad(GPIOB, GPIOB_DRIVEB);
|
|
chThdSleepMilliseconds(1); // Settling time
|
|
return TRUE;
|
|
}
|
|
|
|
static void read_xyz(GMouse *m, GMouseReading *prd) {
|
|
adcsample_t samples[ADC_NUM_CHANNELS * ADC_BUF_DEPTH];
|
|
(void) m;
|
|
|
|
// No buttons
|
|
prd->buttons = 0;
|
|
|
|
// Get the z reading (assumes we are ready to read z)
|
|
adcConvert(&ADCD1, &adcgrpcfg, samples, ADC_BUF_DEPTH);
|
|
prd->z = samples[0];
|
|
|
|
// Take a shortcut and don't read x, y if we know we are definitely not touched.
|
|
if (prd->z >= Z_TOUCHOFF) {
|
|
|
|
// Get the x reading
|
|
palSetPad(GPIOB, GPIOB_DRIVEA);
|
|
palClearPad(GPIOB, GPIOB_DRIVEB);
|
|
chThdSleepMilliseconds(2);
|
|
adcConvert(&ADCD1, &adcgrpcfg, samples, ADC_BUF_DEPTH);
|
|
prd->x = samples[1];
|
|
|
|
// Get the y reading
|
|
palClearPad(GPIOB, GPIOB_DRIVEA);
|
|
palSetPad(GPIOB, GPIOB_DRIVEB);
|
|
chThdSleepMilliseconds(2);
|
|
adcConvert(&ADCD1, &adcgrpcfg, samples, ADC_BUF_DEPTH);
|
|
prd->y = samples[0];
|
|
|
|
// Set up for reading z again. We know it will be 20ms before we get called again so don't worry about settling time
|
|
palClearPad(GPIOB, GPIOB_DRIVEA);
|
|
palClearPad(GPIOB, GPIOB_DRIVEB);
|
|
}
|
|
}
|
|
|
|
#endif /* _LLD_GMOUSE_MCU_BOARD_H */
|