ugfx/drivers/gdisp/SSD1289/gdisp_lld_config.h
Joel Bodenmann 08e1b0ebc7 Removed the doxygen inside of every driver as doxygen is only meant for highlevel API documentation.
Documenting the drivers interface should be done inside a template driver or the gdisp LLD abstraction.
2014-03-28 19:45:08 +01:00

35 lines
1.1 KiB
C

/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.org/license.html
*/
#ifndef _GDISP_LLD_CONFIG_H
#define _GDISP_LLD_CONFIG_H
#if GFX_USE_GDISP
/*===========================================================================*/
/* Driver hardware support. */
/*===========================================================================*/
#define GDISP_HARDWARE_STREAM_WRITE TRUE
#define GDISP_HARDWARE_STREAM_READ TRUE
#define GDISP_HARDWARE_STREAM_POS TRUE
#define GDISP_HARDWARE_CONTROL TRUE
#if defined(GDISP_USE_DMA)
#define GDISP_HARDWARE_FILLS TRUE
#if !defined(GDISP_PIXELFORMAT) || GDISP_PIXELFORMAT == 0x2565
// Hardware BitBlts are only supported in native pixel format on this controller
#define GDISP_HARDWARE_BITFILLS TRUE
#endif
#endif
#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_RGB565
#endif /* GFX_USE_GDISP */
#endif /* _GDISP_LLD_CONFIG_H */