161 lines
4.1 KiB
C
161 lines
4.1 KiB
C
/*
|
|
* This file is subject to the terms of the GFX License. If a copy of
|
|
* the license was not distributed with this file, you can obtain one at:
|
|
*
|
|
* http://ugfx.org/license.html
|
|
*/
|
|
|
|
/**
|
|
* @file drivers/gdisp/HX8347D/board_HX8347D_stm32f4discovery.h
|
|
* @brief GDISP Graphic Driver subsystem board SPI interface for the HX8347D display.
|
|
*/
|
|
|
|
#ifndef _GDISP_LLD_BOARD_H
|
|
#define _GDISP_LLD_BOARD_H
|
|
|
|
// For a multiple display configuration we would put all this in a structure and then
|
|
// set g->board to that structure.
|
|
|
|
/* Pin assignments */
|
|
#define SET_RST palSetPad(GPIOB, 8)
|
|
#define CLR_RST palClearPad(GPIOB, 8)
|
|
#define SET_DATA palSetPad(GPIOB, 9)
|
|
#define CLR_DATA palClearPad(GPIOB, 9)
|
|
#define SET_CS palSetPad(GPIOA, 4)
|
|
#define CLR_CS palClearPad(GPIOA, 4)
|
|
|
|
/* PWM configuration structure. We use timer 4 channel 2 (orange LED on board). */
|
|
static const PWMConfig pwmcfg = {
|
|
1000000, /* 1 MHz PWM clock frequency. */
|
|
100, /* PWM period is 100 cycles. */
|
|
NULL,
|
|
{
|
|
{PWM_OUTPUT_ACTIVE_HIGH, NULL},
|
|
{PWM_OUTPUT_ACTIVE_HIGH, NULL},
|
|
{PWM_OUTPUT_ACTIVE_HIGH, NULL},
|
|
{PWM_OUTPUT_ACTIVE_HIGH, NULL}
|
|
},
|
|
0
|
|
};
|
|
|
|
/*
|
|
* SPI1 configuration structure.
|
|
* Speed 42MHz, CPHA=0, CPOL=0, 8bits frames, MSb transmitted first.
|
|
* The slave select line is the pin 4 on the port GPIOA.
|
|
*/
|
|
static const SPIConfig spi1cfg_8bit = {
|
|
NULL,
|
|
/* HW dependent part.*/
|
|
GPIOA,
|
|
4,
|
|
0 //SPI_CR1_BR_0
|
|
};
|
|
|
|
/*
|
|
* SPI1 configuration structure.
|
|
* Speed 42MHz, CPHA=0, CPOL=0, 16bits frames, MSb transmitted first.
|
|
* The slave select line is the pin 4 on the port GPIOA.
|
|
*/
|
|
static const SPIConfig spi1cfg_16bit = {
|
|
NULL,
|
|
/* HW dependent part.*/
|
|
GPIOA,
|
|
4,
|
|
SPI_CR1_DFF //SPI_CR1_BR_0
|
|
};
|
|
|
|
static inline void init_board(GDisplay *g) {
|
|
|
|
// As we are not using multiple displays we set g->board to NULL as we don't use it.
|
|
g->board = 0;
|
|
|
|
switch(g->controllerdisplay) {
|
|
case 0: // Set up for Display 0
|
|
/* Display backlight control */
|
|
/* TIM4 is an alternate function 2 (AF2) */
|
|
pwmStart(&PWMD4, &pwmcfg);
|
|
palSetPadMode(GPIOD, 13, PAL_MODE_ALTERNATE(2));
|
|
pwmEnableChannel(&PWMD4, 1, 100);
|
|
|
|
palSetPadMode(GPIOB, 8, PAL_MODE_OUTPUT_PUSHPULL|PAL_STM32_OSPEED_HIGHEST); /* RST */
|
|
palSetPadMode(GPIOB, 9, PAL_MODE_OUTPUT_PUSHPULL|PAL_STM32_OSPEED_HIGHEST); /* RS */
|
|
/*
|
|
* Initializes the SPI driver 1. The SPI1 signals are routed as follow:
|
|
* PB12 - NSS.
|
|
* PB13 - SCK.
|
|
* PB14 - MISO.
|
|
* PB15 - MOSI.
|
|
*/
|
|
SET_CS; SET_DATA;
|
|
spiStart(&SPID1, &spi1cfg_8bit);
|
|
palSetPadMode(GPIOA, 4, PAL_MODE_OUTPUT_PUSHPULL|PAL_STM32_OSPEED_HIGHEST); /* NSS. */
|
|
palSetPadMode(GPIOA, 5, PAL_MODE_ALTERNATE(5)|PAL_STM32_OSPEED_HIGHEST); /* SCK. */
|
|
palSetPadMode(GPIOA, 6, PAL_MODE_ALTERNATE(5)); /* MISO. */
|
|
palSetPadMode(GPIOA, 7, PAL_MODE_ALTERNATE(5)|PAL_STM32_OSPEED_HIGHEST); /* MOSI. */
|
|
break;
|
|
}
|
|
}
|
|
|
|
static inline void post_init_board(GDisplay *g) {
|
|
(void) g;
|
|
}
|
|
|
|
static inline void setpin_reset(GDisplay *g, bool_t state) {
|
|
(void) g;
|
|
if (state) {
|
|
CLR_RST;
|
|
} else {
|
|
SET_RST;
|
|
}
|
|
}
|
|
|
|
static inline void set_backlight(GDisplay *g, uint8_t percent) {
|
|
(void) g;
|
|
pwmEnableChannel(&PWMD4, 1, percent);
|
|
}
|
|
|
|
static inline void acquire_bus(GDisplay *g) {
|
|
(void) g;
|
|
spiAcquireBus(&SPID1);
|
|
while(((SPI1->SR & SPI_SR_TXE) == 0) || ((SPI1->SR & SPI_SR_BSY) != 0)); // Safety
|
|
CLR_CS;
|
|
}
|
|
|
|
static inline void release_bus(GDisplay *g) {
|
|
(void) g;
|
|
SET_CS;
|
|
spiReleaseBus(&SPID1);
|
|
}
|
|
|
|
static inline void busmode16(GDisplay *g) {
|
|
(void) g;
|
|
spiStart(&SPID1, &spi1cfg_16bit);
|
|
}
|
|
|
|
static inline void busmode8(GDisplay *g) {
|
|
(void) g;
|
|
spiStart(&SPID1, &spi1cfg_8bit);
|
|
}
|
|
|
|
static inline void write_index(GDisplay *g, uint8_t index) {
|
|
(void) g;
|
|
CLR_DATA;
|
|
SPI1->DR = index;
|
|
while(((SPI1->SR & SPI_SR_TXE) == 0) || ((SPI1->SR & SPI_SR_BSY) != 0));
|
|
SET_DATA;
|
|
}
|
|
|
|
static inline void write_data(GDisplay *g, uint8_t data) {
|
|
(void) g;
|
|
SPI1->DR = data;
|
|
while(((SPI1->SR & SPI_SR_TXE) == 0) || ((SPI1->SR & SPI_SR_BSY) != 0));
|
|
}
|
|
|
|
static inline void write_ram16(GDisplay *g, uint16_t data) {
|
|
(void) g;
|
|
SPI1->DR = data;
|
|
while((SPI1->SR & SPI_SR_TXE) == 0);
|
|
}
|
|
|
|
#endif /* _GDISP_LLD_BOARD_H */
|