ugfx/drivers/gdisp/SSD1331/gdisp_lld_SSD1331.c

327 lines
8.5 KiB
C

/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.org/license.html
*/
#include "gfx.h"
#if GFX_USE_GDISP
#if defined(GDISP_SCREEN_HEIGHT)
#warning "GDISP: This low level driver does not support setting a screen size. It is being ignored."
#undef GISP_SCREEN_HEIGHT
#endif
#if defined(GDISP_SCREEN_WIDTH)
#warning "GDISP: This low level driver does not support setting a screen size. It is being ignored."
#undef GDISP_SCREEN_WIDTH
#endif
#define GDISP_DRIVER_VMT GDISPVMT_SSD1331
#include "gdisp_lld_config.h"
#include "../../../src/gdisp/gdisp_driver.h"
#include "board_SSD1331.h"
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
#ifndef GDISP_SCREEN_HEIGHT
#define GDISP_SCREEN_HEIGHT 64
#endif
#ifndef GDISP_SCREEN_WIDTH
#define GDISP_SCREEN_WIDTH 96
#endif
#ifndef GDISP_INITIAL_CONTRAST
#define GDISP_INITIAL_CONTRAST 100
#endif
#ifndef GDISP_INITIAL_BACKLIGHT
#define GDISP_INITIAL_BACKLIGHT 32
#endif
#include "SSD1331.h"
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
// Some common routines and macros
#define write_reg(g, reg, data) { write_cmd(g, reg); write_data(g, data); }
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
static const uint8_t initdata[] = {
SSD1331_DISPLAY_OFF,
SSD1331_START_LINE, 0x00,
SSD1331_COM_OFFSET, 0x00,
SSD1331_PIXELS_NORMAL,
SSD1331_MULTIPLEX, 0x3F,
SSD1331_RESET, SSD1331_RESET_OFF,
SSD1331_POWER, SSD1331_POWER_ON,
SSD1331_PHASE_PERIOD, 0x31,
SSD1331_CLOCKS, 0xF0,
SSD1331_PRECHARGE_A, 0x64,
SSD1331_PRECHARGE_B, 0x78,
SSD1331_PRECHARGE_C, 0x64,
SSD1331_PRECHARGE_VOLTAGE, 0x3A,
SSD1331_DESELECT_VOLTAGE, 0x3E,
SSD1331_CONTRAST_A, 0x91,
SSD1331_CONTRAST_B, 0x50,
SSD1331_CONTRAST_C, 0x7D,
SSD1331_BRIGHTNESS, (GDISP_INITIAL_BACKLIGHT*10)/63,
#if GDISP_LLD_PIXELFORMAT == GDISP_PIXELFORMAT_RGB565
SSD1331_MODE, SSD1331_MODE_16_BIT|SSD1331_MODE_COM_SPLIT,
#elif GDISP_LLD_PIXELFORMAT == GDISP_PIXELFORMAT_BGR565
SSD1331_MODE, SSD1331_MODE_16_BIT|SSD1331_MODE_COM_SPLIT|SSD1331_MODE_BGR,
#elif GDISP_LLD_PIXELFORMAT == GDISP_PIXELFORMAT_RGB332
SSD1331_MODE, SSD1331_MODE_8_BIT|SSD1331_MODE_COM_SPLIT,
#elif GDISP_LLD_PIXELFORMAT == GDISP_PIXELFORMAT_BGR332
SSD1331_MODE, SSD1331_MODE_8_BIT|SSD1331_MODE_COM_SPLIT|SSD1331_MODE_BGR,
#else
#error "SSD1331: Invalid color format"
#endif
SSD1331_DRAW_MODE, SSD1331_DRAW_FILLRECT,
};
LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
unsigned i;
// No private area for this controller
g->priv = 0;
// Initialise the board interface
init_board(g);
// Hardware reset
setpin_reset(g, TRUE);
gfxSleepMilliseconds(20);
setpin_reset(g, FALSE);
gfxSleepMilliseconds(20);
// Get the bus for the following initialisation commands
acquire_bus(g);
for(i=0;i<sizeof(initdata);i++)
write_cmd(g, initdata[i]);
write_cmd(g, SSD1331_DISPLAY_ON);
// Finish Init
post_init_board(g);
// Release the bus
release_bus(g);
/* Initialise the GDISP structure */
g->g.Width = GDISP_SCREEN_WIDTH;
g->g.Height = GDISP_SCREEN_HEIGHT;
g->g.Orientation = GDISP_ROTATE_0;
g->g.Powermode = powerOn;
g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
g->g.Contrast = GDISP_INITIAL_CONTRAST;
return TRUE;
}
#if GDISP_HARDWARE_STREAM_WRITE
LLDSPEC void gdisp_lld_write_start(GDisplay *g) {
acquire_bus(g);
write_cmd(g, SSD1331_COLUMN_ADDRESS);
write_cmd(g, g->p.x);
write_cmd(g, g->p.x + g->p.cx - 1);
write_cmd(g, SSD1331_ROW_ADDRESS);
write_cmd(g, g->p.y);
write_cmd(g, g->p.y + g->p.cy - 1);
}
#if GDISP_LLD_PIXELFORMAT == GDISP_PIXELFORMAT_RGB565 || GDISP_LLD_PIXELFORMAT == GDISP_PIXELFORMAT_BGR565
LLDSPEC void gdisp_lld_write_color(GDisplay *g) {
LLDCOLOR_TYPE c;
c = gdispColor2Native(g->p.color);
write_data(g, c >> 8);
write_data(g, c);
}
#else
LLDSPEC void gdisp_lld_write_color(GDisplay *g) {
write_data(g, gdispColor2Native(g->p.color));
}
#endif
LLDSPEC void gdisp_lld_write_stop(GDisplay *g) {
release_bus(g);
}
#endif
#if GDISP_HARDWARE_FILLS
LLDSPEC void gdisp_lld_fill_area(GDisplay *g) {
uint8_t a6, b6, c6;
acquire_bus(g);
if (g->p.color == Black) {
// Use clear window command
write_cmd(g, SSD1331_DRAW_CLEAR);
write_cmd(g, g->p.x);
write_cmd(g, g->p.y);
write_cmd(g, g->p.x + g->p.cx - 1);
write_cmd(g, g->p.y + g->p.cy - 1);
release_bus(g);
return;
}
#if GDISP_LLD_PIXELFORMAT == GDISP_PIXELFORMAT_RGB565 || GDISP_LLD_PIXELFORMAT == GDISP_PIXELFORMAT_RGB332
c6 = RED_OF(g->p.color) >> 2;
#if COLOR_BITS_R < 5
if (c6 & 0x20) c6 |= (1<<(6-COLOR_BITS_R))-1;
#endif
b6 = GREEN_OF(g->p.color) >> 2;
#if COLOR_BITS_G < 6
if (b6 & 0x20) b6 |= (1<<(6-COLOR_BITS_G))-1;
#endif
a6 = BLUE_OF(g->p.color) >> 2;
#if COLOR_BITS_B < 5
if (a6 & 0x20) a6 |= (1<<(6-COLOR_BITS_B))-1;
#endif
#else
c6 = BLUE_OF(g->p.color) >> 2;
#if COLOR_BITS_B < 5
if (c6 & 0x20) c6 |= (1<<(6-COLOR_BITS_B))-1;
#endif
b6 = GREEN_OF(g->p.color) >> 2;
#if COLOR_BITS_G < 6
if (b6 & 0x20) b6 |= (1<<(6-COLOR_BITS_G))-1;
#endif
a6 = RED_OF(g->p.color) >> 2;
#if COLOR_BITS_R < 5
if (a6 & 0x20) a6 |= (1<<(6-COLOR_BITS_R))-1;
#endif
#endif
if (g->p.cx == 1 || g->p.cy == 1) {
// Use Line command
write_cmd(g, SSD1331_DRAW_LINE);
write_cmd(g, g->p.x);
write_cmd(g, g->p.y);
write_cmd(g, g->p.x + g->p.cx - 1);
write_cmd(g, g->p.y + g->p.cy - 1);
} else {
// Use Rectangle command
write_cmd(g, SSD1331_DRAW_RECT);
write_cmd(g, g->p.x);
write_cmd(g, g->p.y);
write_cmd(g, g->p.x + g->p.cx - 1);
write_cmd(g, g->p.y + g->p.cy - 1);
//outline
write_cmd(g, c6);
write_cmd(g, b6);
write_cmd(g, a6);
//fill
}
write_cmd(g, c6);
write_cmd(g, b6);
write_cmd(g, a6);
release_bus(g);
}
#endif
#if GDISP_NEED_SCROLL && GDISP_HARDWARE_SCROLL
LLDSPEC void gdisp_lld_vertical_scroll(GDisplay *g) {
acquire_bus(g);
write_cmd(g, SSD1331_DRAW_COPY);
write_cmd(g, g->p.x);
write_cmd(g, g->p.y);
write_cmd(g, g->p.x + g->p.cx - 1);
write_cmd(g, g->p.y + g->p.cy - 1);
write_cmd(g, g->p.x);
write_cmd(g, g->p.y - lines);
release_bus(g);
}
#endif
#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
LLDSPEC void gdisp_lld_control(GDisplay *g) {
switch(g->p.x) {
case GDISP_CONTROL_POWER:
if (g->g.Powermode == (powermode_t)g->p.ptr)
return;
switch((powermode_t)g->p.ptr) {
case powerOff:
case powerSleep:
case powerDeepSleep:
acquire_bus(g);
write_cmd(g, SSD1331_DISPLAY_OFF);
release_bus(g);
break;
case powerOn:
acquire_bus(g);
write_cmd(g, SSD1331_DISPLAY_ON);
release_bus(g);
break;
default:
return;
}
g->g.Powermode = (powermode_t)g->p.ptr;
return;
/*
case GDISP_CONTROL_ORIENTATION:
if (g->g.Orientation == (orientation_t)g->p.ptr)
return;
switch((orientation_t)g->p.ptr) {
case GDISP_ROTATE_0:
acquire_bus(g);
//TODO
release_bus(g);
g->g.Height = GDISP_SCREEN_HEIGHT;
g->g.Width = GDISP_SCREEN_WIDTH;
break;
case GDISP_ROTATE_90:
acquire_bus(g);
//TODO
release_bus(g);
g->g.Height = GDISP_SCREEN_WIDTH;
g->g.Width = GDISP_SCREEN_HEIGHT;
break;
case GDISP_ROTATE_180:
acquire_bus(g);
//TODO
release_bus(g);
g->g.Height = GDISP_SCREEN_HEIGHT;
g->g.Width = GDISP_SCREEN_WIDTH;
break;
case GDISP_ROTATE_270:
acquire_bus(g);
//TODO
release_bus(g);
g->g.Height = GDISP_SCREEN_WIDTH;
g->g.Width = GDISP_SCREEN_HEIGHT;
break;
default:
return;
}
g->g.Orientation = (orientation_t)g->p.ptr;
return;
*/
case GDISP_CONTROL_BACKLIGHT:
if ((unsigned)g->p.ptr > 100)
g->p.ptr = (void *)100;
acquire_bus(g);
write_cmd(g, SSD1331_BRIGHTNESS);
write_cmd(g, ((unsigned)g->p.ptr*10)/63);
release_bus(g);
g->g.Backlight = (unsigned)g->p.ptr;
return;
//case GDISP_CONTROL_CONTRAST:
default:
return;
}
}
#endif
#endif /* GFX_USE_GDISP */