85 lines
2.8 KiB
Plaintext
85 lines
2.8 KiB
Plaintext
1. Introduction
|
|
|
|
This is a driver for ED060SC4 800x600 e-ink display panel manufactured by
|
|
Prime View. Note that this driver uses a direct connection to the panel from
|
|
the processor; it does not use a separate controller chip between the processor
|
|
and the panel.
|
|
|
|
To use the driver, you need to be able to control the following signals from
|
|
your processor:
|
|
|
|
Gate driver: SPV, CKV, GMODE.
|
|
Source driver: CL, LE, OE, SPH, D0-D7.
|
|
Power supply: +-15V, +22V, -20V, digital Vdd
|
|
|
|
The file "example_schematics.png" shows how to connect the signals to e.g. a
|
|
STM32L151 microcontroller. It also includes an example circuit for providing
|
|
the panel supply voltages.
|
|
|
|
Note that the larger panels (such as the 800x600) consist of multiple segments
|
|
with separate gate driver signals. These can be daisy chained as shown in the
|
|
example schematic.
|
|
|
|
|
|
|
|
|
|
2. Frame buffer emulation
|
|
|
|
Because there is not enough memory to store a full frame buffer on the
|
|
processor, this driver emulates a frame buffer by storing the display data in
|
|
blocks. It will buffer up to EINK_NUMBUFFERS blocks and then write them to the
|
|
screen. The following #defines control the buffering. Larger numbers will
|
|
result in faster drawing, but also use more RAM on the processor:
|
|
|
|
#define EINK_BLOCKWIDTH 20 // Width of a single block in buffer
|
|
#define EINK_BLOCKHEIGHT 20 // Height of a single block in buffers
|
|
#define EINK_NUMBUFFERS 40 // Number of blocks to buffer
|
|
|
|
After drawing your images, you should flush the buffers using the following
|
|
command:
|
|
|
|
gdispFlush();
|
|
|
|
The buffers are also flushed whenever you turn the display off using:
|
|
|
|
gdispSetPowerMode(gPowerOff);
|
|
|
|
|
|
|
|
3. Display clearing and writing waveforms
|
|
|
|
This driver does not know the official Prime View waveforms for driving the
|
|
display, mostly because those are trade secrets and not publicly available.
|
|
Instead, it uses reverse engineered waveforms that are mostly functional.
|
|
|
|
The following #defines control the waveforms:
|
|
|
|
#define EINK_BLINKCLEAR GFXON // Clear to opposite color first
|
|
#define EINK_CLEARCOUNT 10 // Number of sweeps to clear the display
|
|
#define EINK_WRITECOUNT 4 // Number of sweeps when writing to display
|
|
|
|
Increasing the clearcount and writecount can improve contrast, but will also
|
|
slow down the drawing and use more power.
|
|
|
|
|
|
|
|
4. Clock speeds
|
|
|
|
Because the driver bit bangs the display, the clock frequency of the processor
|
|
is quite significant. This is controlled by EINK_CLOCKDELAY variable. Set it
|
|
so that the delay is atleast 50 nanoseconds.
|
|
|
|
|
|
|
|
5. Support for other kinds of panels
|
|
|
|
Most of the Prime View panels should work using this driver, but only ED060SC4
|
|
has been tested so far. Some points of consideration:
|
|
|
|
- Some displays may use 4 bits per pixel. The driver currently assumes 2 bits
|
|
per pixel.
|
|
- Larger displays may require some other way of daisy chaining than shown in
|
|
the example schematics.
|
|
|
|
|