360 lines
9.5 KiB
C
360 lines
9.5 KiB
C
/*
|
|
* This file is subject to the terms of the GFX License. If a copy of
|
|
* the license was not distributed with this file, you can obtain one at:
|
|
*
|
|
* http://ugfx.org/license.html
|
|
*/
|
|
|
|
#include "gfx.h"
|
|
|
|
#if GFX_USE_GDISP
|
|
|
|
#define GDISP_DRIVER_VMT GDISPVMT_SSD1306
|
|
#include "drivers/gdisp/SSD1306/gdisp_lld_config.h"
|
|
#include "src/gdisp/gdisp_driver.h"
|
|
|
|
#include "board_SSD1306.h"
|
|
#include <string.h> // for memset
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local definitions. */
|
|
/*===========================================================================*/
|
|
|
|
#ifndef GDISP_SCREEN_HEIGHT
|
|
#define GDISP_SCREEN_HEIGHT 64 // This controller should support 32 (untested) or 64
|
|
#endif
|
|
#ifndef GDISP_SCREEN_WIDTH
|
|
#define GDISP_SCREEN_WIDTH 128
|
|
#endif
|
|
#ifndef GDISP_INITIAL_CONTRAST
|
|
#define GDISP_INITIAL_CONTRAST 100
|
|
#endif
|
|
#ifndef GDISP_INITIAL_BACKLIGHT
|
|
#define GDISP_INITIAL_BACKLIGHT 100
|
|
#endif
|
|
#ifdef SSD1306_PAGE_PREFIX
|
|
#define SSD1306_PAGE_WIDTH (GDISP_SCREEN_WIDTH+1)
|
|
#define SSD1306_PAGE_OFFSET 1
|
|
#else
|
|
#define SSD1306_PAGE_WIDTH GDISP_SCREEN_WIDTH
|
|
#define SSD1306_PAGE_OFFSET 0
|
|
#endif
|
|
|
|
#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0)
|
|
|
|
#include "drivers/gdisp/SSD1306/SSD1306.h"
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local functions. */
|
|
/*===========================================================================*/
|
|
|
|
// Some common routines and macros
|
|
#define RAM(g) ((uint8_t *)g->priv)
|
|
#define write_cmd2(g, cmd1, cmd2) { write_cmd(g, cmd1); write_cmd(g, cmd2); }
|
|
#define write_cmd3(g, cmd1, cmd2, cmd3) { write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); }
|
|
|
|
// Some common routines and macros
|
|
#define delay(us) gfxSleepMicroseconds(us)
|
|
#define delayms(ms) gfxSleepMilliseconds(ms)
|
|
|
|
#define xyaddr(x, y) (SSD1306_PAGE_OFFSET + (x) + ((y)>>3)*SSD1306_PAGE_WIDTH)
|
|
#define xybit(y) (1<<((y)&7))
|
|
|
|
/*===========================================================================*/
|
|
/* Driver exported functions. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* As this controller can't update on a pixel boundary we need to maintain the
|
|
* the entire display surface in memory so that we can do the necessary bit
|
|
* operations. Fortunately it is a small display in monochrome.
|
|
* 64 * 128 / 8 = 1024 bytes.
|
|
*/
|
|
|
|
LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
|
|
// The private area is the display surface.
|
|
g->priv = gfxAlloc(GDISP_SCREEN_HEIGHT/8 * SSD1306_PAGE_WIDTH);
|
|
|
|
// Fill in the prefix command byte on each page line of the display buffer
|
|
// We can do it during initialisation as this byte is never overwritten.
|
|
#ifdef SSD1306_PAGE_PREFIX
|
|
{
|
|
unsigned i;
|
|
|
|
for(i=0; i < GDISP_SCREEN_HEIGHT/8 * SSD1306_PAGE_WIDTH; i+=SSD1306_PAGE_WIDTH)
|
|
RAM(g)[i] = SSD1306_PAGE_PREFIX;
|
|
}
|
|
#endif
|
|
|
|
// Initialise the board interface
|
|
init_board(g);
|
|
|
|
// Hardware reset
|
|
setpin_reset(g, TRUE);
|
|
gfxSleepMilliseconds(20);
|
|
setpin_reset(g, FALSE);
|
|
gfxSleepMilliseconds(20);
|
|
|
|
acquire_bus(g);
|
|
|
|
write_cmd(g, SSD1306_DISPLAYOFF);
|
|
write_cmd2(g, SSD1306_SETDISPLAYCLOCKDIV, 0x80);
|
|
write_cmd2(g, SSD1306_SETMULTIPLEX, GDISP_SCREEN_HEIGHT-1);
|
|
write_cmd2(g, SSD1306_SETPRECHARGE, 0x1F);
|
|
write_cmd2(g, SSD1306_SETDISPLAYOFFSET, 0);
|
|
write_cmd(g, SSD1306_SETSTARTLINE | 0);
|
|
write_cmd2(g, SSD1306_ENABLE_CHARGE_PUMP, 0x14);
|
|
write_cmd2(g, SSD1306_MEMORYMODE, 0);
|
|
write_cmd(g, SSD1306_COLSCANDEC);
|
|
write_cmd(g, SSD1306_ROWSCANDEC);
|
|
#if GDISP_SCREEN_HEIGHT == 64
|
|
write_cmd2(g, SSD1306_SETCOMPINS, 0x12);
|
|
#else
|
|
write_cmd2(g, SSD1306_SETCOMPINS, 0x22);
|
|
#endif
|
|
write_cmd2(g, SSD1306_SETCONTRAST, (uint8_t)(GDISP_INITIAL_CONTRAST*256/101)); // Set initial contrast.
|
|
write_cmd2(g, SSD1306_SETVCOMDETECT, 0x10);
|
|
write_cmd(g, SSD1306_DISPLAYON);
|
|
write_cmd(g, SSD1306_NORMALDISPLAY);
|
|
write_cmd3(g, SSD1306_HV_COLUMN_ADDRESS, 0, GDISP_SCREEN_WIDTH-1);
|
|
write_cmd3(g, SSD1306_HV_PAGE_ADDRESS, 0, GDISP_SCREEN_HEIGHT/8-1);
|
|
|
|
// Finish Init
|
|
post_init_board(g);
|
|
|
|
// Release the bus
|
|
release_bus(g);
|
|
|
|
/* Initialise the GDISP structure */
|
|
g->g.Width = GDISP_SCREEN_WIDTH;
|
|
g->g.Height = GDISP_SCREEN_HEIGHT;
|
|
g->g.Orientation = GDISP_ROTATE_0;
|
|
g->g.Powermode = powerOn;
|
|
g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
|
|
g->g.Contrast = GDISP_INITIAL_CONTRAST;
|
|
return TRUE;
|
|
}
|
|
|
|
#if GDISP_HARDWARE_FLUSH
|
|
LLDSPEC void gdisp_lld_flush(GDisplay *g) {
|
|
uint8_t * ram;
|
|
unsigned pages;
|
|
|
|
// Don't flush if we don't need it.
|
|
if (!(g->flags & GDISP_FLG_NEEDFLUSH))
|
|
return;
|
|
ram = RAM(g);
|
|
pages = GDISP_SCREEN_HEIGHT/8;
|
|
|
|
acquire_bus(g);
|
|
write_cmd(g, SSD1306_SETSTARTLINE | 0);
|
|
|
|
while (pages--) {
|
|
#if SSD1306_SH1106
|
|
write_cmd(g, SSD1306_PAM_PAGE_START + (7 - pages));
|
|
write_cmd(g, SSD1306_SETLOWCOLUMN + 2);
|
|
write_cmd(g, SSD1306_SETHIGHCOLUMN);
|
|
#endif
|
|
|
|
write_data(g, ram, SSD1306_PAGE_WIDTH);
|
|
ram += SSD1306_PAGE_WIDTH;
|
|
}
|
|
release_bus(g);
|
|
|
|
g->flags &= ~GDISP_FLG_NEEDFLUSH;
|
|
}
|
|
#endif
|
|
|
|
#if GDISP_HARDWARE_FILLS
|
|
LLDSPEC void gdisp_lld_fill_area(GDisplay *g) {
|
|
coord_t sy, ey;
|
|
coord_t sx, ex;
|
|
coord_t col;
|
|
unsigned spage, zpages;
|
|
uint8_t * base;
|
|
uint8_t mask;
|
|
|
|
switch(g->g.Orientation) {
|
|
default:
|
|
case GDISP_ROTATE_0:
|
|
sx = g->p.x;
|
|
ex = g->p.x + g->p.cx - 1;
|
|
sy = g->p.y;
|
|
ey = sy + g->p.cy - 1;
|
|
break;
|
|
case GDISP_ROTATE_90:
|
|
sx = g->p.y;
|
|
ex = g->p.y + g->p.cy - 1;
|
|
sy = GDISP_SCREEN_HEIGHT - g->p.x - g->p.cx;
|
|
ey = GDISP_SCREEN_HEIGHT-1 - g->p.x;
|
|
break;
|
|
case GDISP_ROTATE_180:
|
|
sx = GDISP_SCREEN_WIDTH - g->p.x - g->p.cx;
|
|
ex = GDISP_SCREEN_WIDTH-1 - g->p.x;
|
|
sy = GDISP_SCREEN_HEIGHT - g->p.y - g->p.cy;
|
|
ey = GDISP_SCREEN_HEIGHT-1 - g->p.y;
|
|
break;
|
|
case GDISP_ROTATE_270:
|
|
sx = GDISP_SCREEN_WIDTH - g->p.y - g->p.cy;
|
|
ex = GDISP_SCREEN_WIDTH-1 - g->p.y;
|
|
sy = g->p.x;
|
|
ey = g->p.x + g->p.cx - 1;
|
|
break;
|
|
}
|
|
|
|
spage = sy / 8;
|
|
base = RAM(g) + SSD1306_PAGE_OFFSET + SSD1306_PAGE_WIDTH * spage;
|
|
mask = 0xff << (sy&7);
|
|
zpages = (ey / 8) - spage;
|
|
|
|
if (gdispColor2Native(g->p.color) == gdispColor2Native(Black)) {
|
|
while (zpages--) {
|
|
for (col = sx; col <= ex; col++)
|
|
base[col] &= ~mask;
|
|
mask = 0xff;
|
|
base += SSD1306_PAGE_WIDTH;
|
|
}
|
|
mask &= (0xff >> (7 - (ey&7)));
|
|
for (col = sx; col <= ex; col++)
|
|
base[col] &= ~mask;
|
|
} else {
|
|
while (zpages--) {
|
|
for (col = sx; col <= ex; col++)
|
|
base[col] |= mask;
|
|
mask = 0xff;
|
|
base += SSD1306_PAGE_WIDTH;
|
|
}
|
|
mask &= (0xff >> (7 - (ey&7)));
|
|
for (col = sx; col <= ex; col++)
|
|
base[col] |= mask;
|
|
}
|
|
g->flags |= GDISP_FLG_NEEDFLUSH;
|
|
}
|
|
#endif
|
|
|
|
#if GDISP_HARDWARE_DRAWPIXEL
|
|
LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
|
|
coord_t x, y;
|
|
|
|
switch(g->g.Orientation) {
|
|
default:
|
|
case GDISP_ROTATE_0:
|
|
x = g->p.x;
|
|
y = g->p.y;
|
|
break;
|
|
case GDISP_ROTATE_90:
|
|
x = g->p.y;
|
|
y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
|
|
break;
|
|
case GDISP_ROTATE_180:
|
|
x = GDISP_SCREEN_WIDTH-1 - g->p.x;
|
|
y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
|
|
break;
|
|
case GDISP_ROTATE_270:
|
|
x = GDISP_SCREEN_WIDTH-1 - g->p.y;
|
|
y = g->p.x;
|
|
break;
|
|
}
|
|
if (gdispColor2Native(g->p.color) != gdispColor2Native(Black))
|
|
RAM(g)[xyaddr(x, y)] |= xybit(y);
|
|
else
|
|
RAM(g)[xyaddr(x, y)] &= ~xybit(y);
|
|
g->flags |= GDISP_FLG_NEEDFLUSH;
|
|
}
|
|
#endif
|
|
|
|
#if GDISP_HARDWARE_PIXELREAD
|
|
LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
|
|
coord_t x, y;
|
|
|
|
switch(g->g.Orientation) {
|
|
default:
|
|
case GDISP_ROTATE_0:
|
|
x = g->p.x;
|
|
y = g->p.y;
|
|
break;
|
|
case GDISP_ROTATE_90:
|
|
x = g->p.y;
|
|
y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
|
|
break;
|
|
case GDISP_ROTATE_180:
|
|
x = GDISP_SCREEN_WIDTH-1 - g->p.x;
|
|
y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
|
|
break;
|
|
case GDISP_ROTATE_270:
|
|
x = GDISP_SCREEN_WIDTH-1 - g->p.y;
|
|
y = g->p.x;
|
|
break;
|
|
}
|
|
return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black;
|
|
}
|
|
#endif
|
|
|
|
#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
|
|
LLDSPEC void gdisp_lld_control(GDisplay *g) {
|
|
switch(g->p.x) {
|
|
case GDISP_CONTROL_POWER:
|
|
if (g->g.Powermode == (powermode_t)g->p.ptr)
|
|
return;
|
|
switch((powermode_t)g->p.ptr) {
|
|
case powerOff:
|
|
case powerSleep:
|
|
case powerDeepSleep:
|
|
acquire_bus(g);
|
|
write_cmd(g, SSD1306_DISPLAYOFF);
|
|
release_bus(g);
|
|
break;
|
|
case powerOn:
|
|
acquire_bus(g);
|
|
write_cmd(g, SSD1306_DISPLAYON);
|
|
release_bus(g);
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
g->g.Powermode = (powermode_t)g->p.ptr;
|
|
return;
|
|
|
|
case GDISP_CONTROL_ORIENTATION:
|
|
if (g->g.Orientation == (orientation_t)g->p.ptr)
|
|
return;
|
|
switch((orientation_t)g->p.ptr) {
|
|
/* Rotation is handled by the drawing routines */
|
|
case GDISP_ROTATE_0:
|
|
case GDISP_ROTATE_180:
|
|
g->g.Height = GDISP_SCREEN_HEIGHT;
|
|
g->g.Width = GDISP_SCREEN_WIDTH;
|
|
break;
|
|
case GDISP_ROTATE_90:
|
|
case GDISP_ROTATE_270:
|
|
g->g.Height = GDISP_SCREEN_WIDTH;
|
|
g->g.Width = GDISP_SCREEN_HEIGHT;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
g->g.Orientation = (orientation_t)g->p.ptr;
|
|
return;
|
|
|
|
case GDISP_CONTROL_CONTRAST:
|
|
if ((unsigned)g->p.ptr > 100)
|
|
g->p.ptr = (void *)100;
|
|
acquire_bus(g);
|
|
write_cmd2(g, SSD1306_SETCONTRAST, (((unsigned)g->p.ptr)<<8)/101);
|
|
release_bus(g);
|
|
g->g.Contrast = (unsigned)g->p.ptr;
|
|
return;
|
|
|
|
// Our own special controller code to inverse the display
|
|
// 0 = normal, 1 = inverse
|
|
case GDISP_CONTROL_INVERSE:
|
|
acquire_bus(g);
|
|
write_cmd(g, g->p.ptr ? SSD1306_INVERTDISPLAY : SSD1306_NORMALDISPLAY);
|
|
release_bus(g);
|
|
return;
|
|
}
|
|
}
|
|
#endif // GDISP_NEED_CONTROL
|
|
|
|
#endif // GFX_USE_GDISP
|