ugfx/drivers/gdisp/SSD1289
Andrew Hannam 5bdab7a8a8 Fixes for the SSD1289 driver
Put aquire_bus() and release_bus() in the right place in the control
routine.
Simplify reset_viewport().
A couple of other simple tidyups.
2012-12-20 18:33:43 +10:00
..
gdisp_lld_board_example_fsmc.h copyright header fixes... 2012-11-26 23:38:11 +01:00
gdisp_lld_board_example.h copyright header fixes... 2012-11-26 23:38:11 +01:00
gdisp_lld_board_firebullstm32f103.h copyright header fixes... 2012-11-26 23:38:11 +01:00
gdisp_lld_config.h SSD1289 calibration clear fix 2012-12-17 22:33:00 +01:00
gdisp_lld.c Fixes for the SSD1289 driver 2012-12-20 18:33:43 +10:00
gdisp_lld.mk Makefile LCD replaced with GFX 2012-10-04 09:09:03 +02:00
readme.txt gdisp Nokia and SSD1289 updates 2012-11-17 18:11:05 +10:00

To use this driver:

1. Add in your halconf.h:
	a) #define GFX_USE_GDISP	TRUE

	b) Any optional high level driver defines (see gdisp.h) eg: GDISP_NEED_MULTITHREAD

	c) If you are not using a known board then create a gdisp_lld_board.h file
		and ensure it is on your include path.
		Use the gdisp_lld_board_example.h or gdisp_lld_board_fsmc.h file as a basis.
		Currently known boards are:
		 	BOARD_FIREBULL_STM32_F103	- GPIO interface: requires GDISP_CMD_PORT and GDISP_DATA_PORT to be defined

	d) The following are optional - define them if you are not using the defaults below:
		#define GDISP_SCREEN_WIDTH	320
		#define GDISP_SCREEN_HEIGHT	240

2. To your makefile add the following lines:
	include $(GFXLIB)/drivers/gdisp/SSD1289/gdisp_lld.mk