ugfx/drivers/gdisp/SSD2119
2013-03-08 09:20:51 +01:00
..
gdisp_lld_board_embest_dmstf4bb.h embest DMSTF4BB board fix - removed FSMC suffix because only FSMC exists 2013-03-08 09:20:51 +01:00
gdisp_lld_config.h updated copyright - 2013 2013-03-06 23:11:01 +01:00
gdisp_lld.c embest DMSTF4BB board fix - removed FSMC suffix because only FSMC exists 2013-03-08 09:20:51 +01:00
gdisp_lld.mk SSD2119: backlight control 2013-02-21 22:46:47 +01:00
readme.txt SSD2119: readme fix 2013-03-02 13:33:19 +01:00
ssd2119.h updated copyright - 2013 2013-03-06 23:11:01 +01:00

Description:

Driver for LCD with 16-bit interface in 8080 mode (65k colors).

To use this driver:

1. Add in your halconf.h:
	a) #define GFX_USE_GDISP	TRUE

	b) Any optional high level driver defines (see gdisp.h) eg: GDISP_NEED_MULTITHREAD

	c) If you are not using a known board then create a gdisp_lld_board.h file
		and ensure it is on your include path.
		Use the gdisp_lld_board_embest_dmstf4bb_fsmc.h file as a basis.
		Currently known boards are:
			BOARD_EMBEST_DMSTF4BB_FSMC	- FSMC interface
		Board configuratios assume you have STM32_PWM_USE_TIM4 set to TRUE in your mcuconf.h.

	d) The following are optional - define them if you are not using the defaults below:
		#define GDISP_SCREEN_WIDTH	320
		#define GDISP_SCREEN_HEIGHT	240

2. To your makefile add the following lines:
	include $(GFXLIB)/drivers/gdisp/SSD2119/gdisp_lld.mk