300 lines
7.8 KiB
C
300 lines
7.8 KiB
C
/*
|
|
* This file is subject to the terms of the GFX License. If a copy of
|
|
* the license was not distributed with this file, you can obtain one at:
|
|
*
|
|
* http://ugfx.org/license.html
|
|
*/
|
|
|
|
#include "gfx.h"
|
|
|
|
#if GFX_USE_GDISP
|
|
|
|
#define GDISP_DRIVER_VMT GDISPVMT_SSD1322
|
|
#include "gdisp_lld_config.h"
|
|
#include "../../../src/gdisp/gdisp_driver.h"
|
|
|
|
#include "board_SSD1322.h"
|
|
#include <string.h> // for memset
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local definitions. */
|
|
/*===========================================================================*/
|
|
|
|
#ifndef GDISP_SCREEN_HEIGHT
|
|
#define GDISP_SCREEN_HEIGHT 64 // This controller should support 64
|
|
#endif
|
|
#ifndef GDISP_SCREEN_WIDTH
|
|
#define GDISP_SCREEN_WIDTH 256
|
|
#endif
|
|
#ifndef GDISP_INITIAL_CONTRAST
|
|
#define GDISP_INITIAL_CONTRAST 100
|
|
#endif
|
|
#ifndef GDISP_INITIAL_BACKLIGHT
|
|
#define GDISP_INITIAL_BACKLIGHT 100
|
|
#endif
|
|
#ifndef SSD1322_USE_DMA
|
|
#define SSD1322_USE_DMA GFXOFF
|
|
#endif
|
|
|
|
#define SSD1322_ROW_WIDTH (GDISP_SCREEN_WIDTH/2)
|
|
|
|
#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0)
|
|
|
|
#include "SSD1322.h"
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local functions. */
|
|
/*===========================================================================*/
|
|
|
|
// Some common routines and macros
|
|
#define RAM(g) ((uint8_t *)g->priv)
|
|
|
|
// Some common routines and macros
|
|
#define xyaddr(x, y) ((x) + (y)*SSD1322_ROW_WIDTH)
|
|
#define xybits(x, y, c) ((c)<<(((x)&1)<<2))
|
|
|
|
/*===========================================================================*/
|
|
/* Driver exported functions. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* As this controller can't update on a pixel boundary we need to maintain the
|
|
* the entire display surface in memory so that we can do the necessary bit
|
|
* operations. Fortunately it is a small display in 4 bit grayscale.
|
|
* 64 * 128 / 2 = 4096 bytes.
|
|
*/
|
|
|
|
LLDSPEC gBool gdisp_lld_init(GDisplay *g) {
|
|
// The private area is the display surface.
|
|
g->priv = gfxAlloc(GDISP_SCREEN_HEIGHT * SSD1322_ROW_WIDTH);
|
|
|
|
// Initialise the board interface
|
|
init_board(g);
|
|
post_init_board(g);
|
|
|
|
// Hardware reset
|
|
setpin_reset(g, gTrue);
|
|
gfxSleepMilliseconds(20);
|
|
setpin_reset(g, gFalse);
|
|
gfxSleepMilliseconds(200);
|
|
|
|
|
|
write_cmd(g,CMD_SET_COMMAND_LOCK);
|
|
write_data(g,0x12); // Unlock OLED driver IC
|
|
|
|
write_cmd(g,CMD_SET_DISPLAY_OFF);
|
|
|
|
write_cmd(g,CMD_SET_CLOCK_DIVIDER);
|
|
write_data(g,0x91);
|
|
|
|
write_cmd(g,CMD_SET_MULTIPLEX_RATIO);
|
|
write_data(g,0x3F); //duty = 1/64*,64 COMS are enabled
|
|
|
|
write_cmd(g,CMD_SET_DISPLAY_OFFSET);
|
|
write_data(g,0x00);
|
|
|
|
write_cmd(g,CMD_SET_DISPLAY_START_LINE); //set start line position
|
|
write_data(g,0x00);
|
|
|
|
write_cmd(g,CMD_SET_REMAP);
|
|
write_data(g,0x14); //Horizontal address increment,Disable Column Address Re-map,Enable Nibble Re-map,Scan from COM[N-1] to COM0,Disable COM Split Odd Even
|
|
write_data(g,0x11); //Enable Dual COM mode
|
|
|
|
write_cmd(g,0xB5); //GPIO
|
|
write_data(g,0x00);
|
|
//writeCommand(0x00);
|
|
|
|
write_cmd(g,CMD_SET_FUNCTION_SELECTION);
|
|
write_data(g,0x01);// selection external VDD
|
|
|
|
write_cmd(g,CMD_DISPLAY_ENHANCEMENT);
|
|
write_data(g,0xA0);// enables the external VSL
|
|
write_data(g,0xb5);// 0xfd,Enhanced low GS display quality;default is 0xb5(normal),
|
|
|
|
write_cmd(g,CMD_SET_CONTRAST_CURRENT);
|
|
write_data(g,0x7f); // 0xff default is 0x7f
|
|
|
|
write_cmd(g,CMD_MASTER_CURRENT_CONTROL);
|
|
write_data(g,0x0f); //default is 0x0f
|
|
|
|
write_cmd(g,0xB9); //GRAY TABLE,linear Gray Scale
|
|
|
|
write_cmd(g,CMD_SET_PHASE_LENGTH);
|
|
write_data(g,0xE2); // default is 0x74
|
|
|
|
write_cmd(g,CMD_DISPLAY_ENHANCEMENT_B);
|
|
write_data(g,0xA2); // Reserved;default is 0xa2(normal)
|
|
write_data(g,0x20);
|
|
|
|
write_cmd(g,CMD_SET_PRECHARGE_VOLTAGE);
|
|
write_data(g,0x1F); // 0.6xVcc
|
|
|
|
write_cmd(g,CMD_SET_SECOND_PRECHARGE_PERIOD);
|
|
write_data(g,0x08); // default
|
|
|
|
write_cmd(g,CMD_SET_VCOMH_VOLTAGE );
|
|
write_data(g,0x07); // 0.86xVcc;default is 0x04
|
|
|
|
write_cmd(g,CMD_SET_DISPLAY_MODE_NORMAL);
|
|
|
|
write_cmd(g,CMD_EXIT_PARTIAL_DISPLAY);
|
|
|
|
write_cmd(g,CMD_SET_DISPLAY_ON);
|
|
// Finish Init
|
|
post_init_board(g);
|
|
|
|
|
|
|
|
/* Initialise the GDISP structure */
|
|
g->g.Width = GDISP_SCREEN_WIDTH;
|
|
g->g.Height = GDISP_SCREEN_HEIGHT;
|
|
g->g.Orientation = GDISP_ROTATE_180;
|
|
g->g.Powermode = powerOn;
|
|
g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
|
|
g->g.Contrast = GDISP_INITIAL_CONTRAST;
|
|
return gTrue;
|
|
}
|
|
|
|
#if GDISP_HARDWARE_FLUSH
|
|
LLDSPEC void gdisp_lld_flush(GDisplay *g) {
|
|
uint8_t * ram;
|
|
unsigned cols,rows;
|
|
|
|
// Don't flush if we don't need it.
|
|
if (!(g->flags & GDISP_FLG_NEEDFLUSH))
|
|
return;
|
|
|
|
acquire_bus(g);
|
|
write_cmd(g, CMD_SET_COLUMN_ADDR); // range 28 to 91 for 256 pixels to x
|
|
write_data(g, 28);
|
|
write_data(g, GDISP_SCREEN_WIDTH/4 + 28 - 1);
|
|
write_cmd(g, CMD_SET_ROW_ADDR); // range 0 to 63 for 64 pixels
|
|
write_data(g, 0);
|
|
write_data(g, GDISP_SCREEN_HEIGHT-1);
|
|
write_cmd(g, CMD_WRITE_RAM);
|
|
ram = RAM(g);
|
|
#if SSD1322_USE_DMA
|
|
write_data_DMA(g, ram);
|
|
#else
|
|
for(rows = 0; rows < GDISP_SCREEN_HEIGHT; rows ++) {
|
|
for(cols = 0;cols < GDISP_SCREEN_WIDTH/2; cols ++) {
|
|
write_data(g, *ram++);
|
|
}
|
|
}
|
|
#endif
|
|
release_bus(g);
|
|
g->flags &= ~GDISP_FLG_NEEDFLUSH;
|
|
}
|
|
#endif
|
|
|
|
#if GDISP_HARDWARE_DRAWPIXEL
|
|
LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
|
|
gCoord x, y;
|
|
uint8_t *ram;
|
|
|
|
switch(g->g.Orientation) {
|
|
default:
|
|
case GDISP_ROTATE_0:
|
|
x = g->p.x;
|
|
y = g->p.y;
|
|
break;
|
|
case GDISP_ROTATE_90:
|
|
x = g->p.y;
|
|
y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
|
|
break;
|
|
case GDISP_ROTATE_180:
|
|
x = GDISP_SCREEN_WIDTH-1 - g->p.x;
|
|
y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
|
|
break;
|
|
case GDISP_ROTATE_270:
|
|
x = GDISP_SCREEN_WIDTH-1 - g->p.y;
|
|
y = g->p.x;
|
|
break;
|
|
}
|
|
ram = RAM(g)+xyaddr(x,y);
|
|
*ram &= ~xybits(x, y, LLDCOLOR_MASK());
|
|
*ram |= xybits(x, y, gdispColor2Native(g->p.color));
|
|
g->flags |= GDISP_FLG_NEEDFLUSH;
|
|
}
|
|
#endif
|
|
|
|
#if GDISP_HARDWARE_PIXELREAD
|
|
LLDSPEC gColor gdisp_lld_get_pixel_color(GDisplay *g) {
|
|
gCoord x, y;
|
|
LLDCOLOR_TYPE c;
|
|
|
|
switch(g->g.Orientation) {
|
|
default:
|
|
case GDISP_ROTATE_0:
|
|
x = g->p.x;
|
|
y = g->p.y;
|
|
break;
|
|
case GDISP_ROTATE_90:
|
|
x = g->p.y;
|
|
y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
|
|
break;
|
|
case GDISP_ROTATE_180:
|
|
x = GDISP_SCREEN_WIDTH-1 - g->p.x;
|
|
y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
|
|
break;
|
|
case GDISP_ROTATE_270:
|
|
x = GDISP_SCREEN_WIDTH-1 - g->p.y;
|
|
y = g->p.x;
|
|
break;
|
|
}
|
|
c = (RAM(g)[xyaddr(x, y)]>>((x & 1)<<2)) & LLDCOLOR_MASK();
|
|
return gdispNative2Color(c);
|
|
}
|
|
#endif
|
|
|
|
#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
|
|
LLDSPEC void gdisp_lld_control(GDisplay *g) {
|
|
switch(g->p.x) {
|
|
case GDISP_CONTROL_POWER:
|
|
if (g->g.Powermode == (powermode_t)g->p.ptr)
|
|
return;
|
|
switch((powermode_t)g->p.ptr) {
|
|
case powerOff:
|
|
case powerSleep:
|
|
case powerDeepSleep:
|
|
acquire_bus(g);
|
|
write_cmd(g, CMD_SET_DISPLAY_MODE_OFF);
|
|
release_bus(g);
|
|
break;
|
|
case powerOn:
|
|
acquire_bus(g);
|
|
write_cmd(g, CMD_SET_DISPLAY_MODE_ON);
|
|
release_bus(g);
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
g->g.Powermode = (powermode_t)g->p.ptr;
|
|
return;
|
|
|
|
case GDISP_CONTROL_ORIENTATION:
|
|
if (g->g.Orientation == (orientation_t)g->p.ptr)
|
|
return;
|
|
switch((orientation_t)g->p.ptr) {
|
|
/* Rotation is handled by the drawing routines */
|
|
case GDISP_ROTATE_0:
|
|
case GDISP_ROTATE_180:
|
|
g->g.Height = GDISP_SCREEN_HEIGHT;
|
|
g->g.Width = GDISP_SCREEN_WIDTH;
|
|
break;
|
|
case GDISP_ROTATE_90:
|
|
case GDISP_ROTATE_270:
|
|
g->g.Height = GDISP_SCREEN_WIDTH;
|
|
g->g.Width = GDISP_SCREEN_HEIGHT;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
g->g.Orientation = (orientation_t)g->p.ptr;
|
|
return;
|
|
}
|
|
}
|
|
#endif // GDISP_NEED_CONTROL
|
|
|
|
#endif // GFX_USE_GDISP
|