ugfx/boards/base/HY-MiniSTM32V/chibios_board/board.h

278 lines
7.8 KiB
C
Raw Permalink Normal View History

2015-02-01 16:35:18 +00:00
/*
ChibiOS/RT - Copyright (C) 2006-2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef _BOARD_H_
#define _BOARD_H_
/*
* Board file for HY-MiniSTM32V board from HAOYU (China).
* www.powermcu.com or www.hotmcu.com.
*/
/*
* Board identifier.
*/
#define BOARD_HY_MINI_STM32V
#define BOARD_NAME "HY-MiniSTM32V"
/*
* Board frequencies.
*/
#define STM32_LSECLK 32768
#define STM32_HSECLK 8000000
/*
* MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
*/
#define STM32F10X_HD
/*
* IO pins assignments.
*/
#define GPIOA_PIN0 0
#define GPIOA_PIN1 1
#define GPIOA_PIN2 2
#define GPIOA_PIN3 3
#define GPIOA_TP_CS 4
#define GPIOA_SPI_SCK 5
#define GPIOA_SPI_MISO 6
#define GPIOA_SPI_MOSI 7
#define GPIOA_PIN8 8
#define GPIOA_USART1_TX 9
#define GPIOA_USART1_RX 10
#define GPIOA_USB_DM 11
#define GPIOA_USB_DP 12
#define GPIOA_PIN13 13
#define GPIOA_PIN14 14
#define GPIOA_PIN15 15
#define GPIOB_LED1 0
#define GPIOB_LED2 1
#define GPIOB_USER_KEYB 2
#define GPIOB_PIN3 3
#define GPIOB_PIN4 4
#define GPIOB_BL_CNT 5
#define GPIOB_TP_IRQ 6
#define GPIOB_USB_EN 7
#define GPIOB_PIN8 8
#define GPIOB_PIN9 9
#define GPIOB_PIN10 10
#define GPIOB_PIN11 11
#define GPIOB_PIN12 12
#define GPIOB_PIN13 13
#define GPIOB_PIN14 14
#define GPIOB_PIN15 15
#define GPIOC_PIN0 0
#define GPIOC_PIN1 1
#define GPIOC_PIN2 2
#define GPIOC_PIN3 3
#define GPIOC_PIN4 4
#define GPIOC_PIN5 5
#define GPIOC_PIN6 6
#define GPIOC_PIN7 7
#define GPIOC_SDIO_D0 8
#define GPIOC_SDIO_D1 9
#define GPIOC_SDIO_D2 10
#define GPIOC_SDIO_D3 11
#define GPIOC_SDIO_CK 12
#define GPIOC_USER_KEYA 13
#define GPIOC_PIN14 14
#define GPIOC_PIN15 15
#define GPIOD_FSMC_D2 0
#define GPIOD_FSMC_D3 1
#define GPIOD_SDIO_CMD 2
#define GPIOD_SD_CD 3
#define GPIOD_LCD_RD 4
#define GPIOD_LCD_WR 5
#define GPIOD_PIN6 6
#define GPIOD_LCD_CS 7
#define GPIOD_FSMC_D13 8
#define GPIOD_FSMC_D14 9
#define GPIOD_FSMC_D15 10
#define GPIOD_LCD_RS 11
#define GPIOD_PIN12 12
#define GPIOD_PIN13 13
#define GPIOD_FSMC_D0 14
#define GPIOD_FSMC_D1 15
#define GPIOE_PIN0 0
#define GPIOE_PIN1 1
#define GPIOE_PIN2 2
#define GPIOE_PIN3 3
#define GPIOE_PIN4 4
#define GPIOE_PIN5 5
#define GPIOE_PIN6 6
#define GPIOE_FSMC_D4 7
#define GPIOE_FSMC_D5 8
#define GPIOE_FSMC_D6 9
#define GPIOE_FSMC_D7 10
#define GPIOE_FSMC_D8 11
#define GPIOE_FSMC_D9 12
#define GPIOE_FSMC_D10 13
#define GPIOE_FSMC_D11 14
#define GPIOE_FSMC_D12 15
/*
* I/O ports initial setup, this configuration is established soon after reset
* in the initialization code.
*
* The digits have the following meaning:
* 0 - Analog input.
* 1 - Push Pull output 10MHz.
* 2 - Push Pull output 2MHz.
* 3 - Push Pull output 50MHz.
* 4 - Digital input.
* 5 - Open Drain output 10MHz.
* 6 - Open Drain output 2MHz.
* 7 - Open Drain output 50MHz.
* 8 - Digital input with PullUp or PullDown resistor depending on ODR.
* 9 - Alternate Push Pull output 10MHz.
* A - Alternate Push Pull output 2MHz.
* B - Alternate Push Pull output 50MHz.
* C - Reserved.
* D - Alternate Open Drain output 10MHz.
* E - Alternate Open Drain output 2MHz.
* F - Alternate Open Drain output 50MHz.
* Please refer to the STM32 Reference Manual for details.
*/
/*
* Port A setup.
* Everything input with pull-up except:
* PA4 - Push Pull output 50MHz (TP_CS)
* PA5 - Alternate Push Pull output 50MHz (SPI_SCK)
* PA6 - Digital input (SPI_MISO)
* PA7 - Alternate Push Pull output 50MHz (SPI_MOSI)
* PA9 - Alternate Push Pull output 50MHz (USART1_TX)
* PA10 - Digital input (USART1_RX)
* PA11 - Digital input (USB_DM)
*/
#define VAL_GPIOACRL 0xB4B38888 /* PA7...PA0 */
#define VAL_GPIOACRH 0x888844B8 /* PA15...PA8 */
#define VAL_GPIOAODR 0xFFFFFFFF
/*
* Port B setup.
* Everything input with pull-up except:
* PB0 - Push Pull output 50MHz (LED1)
* PB1 - Push Pull output 50MHz (LED2)
* PB2 - Digital input (USER_KEYB)
* PB5 - Alternate Push Pull output 50MHz (BL_CNT)
* PB6 - Digital input (TP_IRQ)
* PB7 - Push Pull output 50MHz (init low) (USB_EN)
*/
#define VAL_GPIOBCRL 0x34B88433 /* PB7...PB0 */
#define VAL_GPIOBCRH 0x88888888 /* PB15...PB8 */
#define VAL_GPIOBODR 0xFFFF7FFC
/*
* Port C setup.
* Everything input with pull-up except:
* PC8 - Digital input (SDIO_D0)
* PC9 - Digital input (SDIO_D1)
* PC10 - Digital input (SDIO_D2)
* PC11 - Digital input (SDIO_D3)
* PC12 - Digital input (SDIO_CK)
* PC13 - Digital input (GPIOC_USER_KEYA)
*/
#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */
#define VAL_GPIOCCRH 0x88444444 /* PC15...PC8 */
#define VAL_GPIOCODR 0xFFFFFFFF
/*
* Port D setup.
* Everything input with pull-up except:
* PD0 - Alternate Push Pull output 50MHz (FSMC_D2)
* PD1 - Alternate Push Pull output 50MHz (FSMC_D1)
* PD2 - Digital input (SDIO_CMD)
* PD3 - Digital input (SD_CD)
* PD4 - Alternate Push Pull output 50MHz (LCD_RD)
* PD5 - Alternate Push Pull output 50MHz (LCD_WR)
* PD7 - Alternate Push Pull output 50MHz (LCD_CS)
* PD8 - Alternate Push Pull output 50MHz (FSMC_D13)
* PD9 - Alternate Push Pull output 50MHz (FSMC_D14)
* PD10 - Alternate Push Pull output 50MHz (FSMC_D15)
* PD11 - Alternate Push Pull output 50MHz (LCD_RS)
* PD14 - Alternate Push Pull output 50MHz (FSMC_D0)
* PD15 - Alternate Push Pull output 50MHz (FSMC_D1)
*/
#define VAL_GPIODCRL 0xB8BB44BB /* PD7...PD0 */
#define VAL_GPIODCRH 0xBB88BBBB /* PD15...PD8 */
#define VAL_GPIODODR 0xFFFFFFFF
/*
* Port E setup.
* Everything input with pull-up except:
* PE7 - Alternate Push Pull output 50MHz (FSMC_D4)
* PE8 - Alternate Push Pull output 50MHz (FSMC_D5)
* PE9 - Alternate Push Pull output 50MHz (FSMC_D6)
* PE10 - Alternate Push Pull output 50MHz (FSMC_D7)
* PE11 - Alternate Push Pull output 50MHz (FSMC_D8)
* PE12 - Alternate Push Pull output 50MHz (FSMC_D9)
* PE13 - Alternate Push Pull output 50MHz (FSMC_D10)
* PE14 - Alternate Push Pull output 50MHz (FSMC_D11)
* PE15 - Alternate Push Pull output 50MHz (FSMC_D12)
*/
#define VAL_GPIOECRL 0xB8888888 /* PE7...PE0 */
#define VAL_GPIOECRH 0xBBBBBBBB /* PE15...PE8 */
#define VAL_GPIOEODR 0xFFFFFFFF
/*
* Port F setup.
* Everything input with pull-up
*/
#define VAL_GPIOFCRL 0x88888888 /* PF7...PE0 */
#define VAL_GPIOFCRH 0x88888888 /* PF15...PE8 */
#define VAL_GPIOFODR 0xFFFFFFFF
/*
* Port G setup.
* Everything input with pull-up
*/
#define VAL_GPIOGCRL 0x88888888 /* PG7...PE0 */
#define VAL_GPIOGCRH 0x88888888 /* PG15...PE8 */
#define VAL_GPIOGODR 0xFFFFFFFF
/*
* USB bus activation macro, required by the USB driver.
*/
#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_EN)
/*
* USB bus de-activation macro, required by the USB driver.
*/
#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_EN)
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
extern "C" {
#endif
void boardInit(void);
#ifdef __cplusplus
}
#endif
#endif /* _FROM_ASM_ */
#endif /* _BOARD_H_ */