ugfx/drivers/gdisp/Nokia6610GE12/board_Nokia6610GE12_template.h

132 lines
2.9 KiB
C
Raw Normal View History

2013-05-03 14:36:17 +00:00
/*
2013-06-15 11:37:22 +00:00
* This file is subject to the terms of the GFX License. If a copy of
2013-05-03 14:36:17 +00:00
* the license was not distributed with this file, you can obtain one at:
*
2013-07-21 20:20:37 +00:00
* http://ugfx.org/license.html
2013-05-03 14:36:17 +00:00
*/
2013-07-21 15:42:25 +00:00
/**
* @file drivers/gdisp/Nokia6610GE12/board_Nokia6610GE12_template.h
* @brief GDISP Graphic Driver subsystem board interface for the Nokia6610 GE12 display.
2013-07-21 15:42:25 +00:00
*
* @addtogroup GDISP
* @{
*/
#ifndef _GDISP_LLD_BOARD_H
#define _GDISP_LLD_BOARD_H
/*
* Set various display properties. These properties mostly depend on the exact controller chip you get.
* The defaults should work for most controllers.
*/
//#define GDISP_SCREEN_HEIGHT 130 // The visible display height
//#define GDISP_SCREEN_WIDTH 130 // The visible display width
//#define GDISP_RAM_X_OFFSET 0 // The x offset of the visible area
//#define GDISP_RAM_Y_OFFSET 2 // The y offset of the visible area
//#define GDISP_SLEEP_POS 50 // The position of the sleep mode partial display
//#define GDISP_INITIAL_CONTRAST 50 // The initial contrast percentage
//#define GDISP_INITIAL_BACKLIGHT 100 // The initial backlight percentage
2013-07-21 15:42:25 +00:00
/**
* @brief Initialise the board for the display.
*
* @param[in] g The GDisplay structure
*
2013-10-21 07:11:07 +00:00
* @note Set the g->board member to whatever is appropriate. For multiple
* displays this might be a pointer to the appropriate register set.
2013-07-21 15:42:25 +00:00
*
* @notapi
*/
static inline void init_board(GDisplay *g) {
(void) g;
}
2013-07-21 15:42:25 +00:00
/**
* @brief After the initialisation.
*
* @param[in] g The GDisplay structure
*
* @notapi
*/
static inline void post_init_board(GDisplay *g) {
(void) g;
2013-07-21 15:42:25 +00:00
}
/**
* @brief Set or clear the lcd reset pin.
*
* @param[in] g The GDisplay structure
2013-07-21 15:42:25 +00:00
* @param[in] state TRUE = lcd in reset, FALSE = normal operation
*
* @notapi
*/
static inline void setpin_reset(GDisplay *g, bool_t state) {
(void) g;
(void) state;
2013-07-21 15:42:25 +00:00
}
/**
* @brief Set the lcd back-light level.
*
* @param[in] g The GDisplay structure
2013-07-21 15:42:25 +00:00
* @param[in] percent 0 to 100%
*
* @notapi
*/
static inline void set_backlight(GDisplay *g, uint8_t percent) {
(void) g;
(void) percent;
2013-07-21 15:42:25 +00:00
}
/**
* @brief Take exclusive control of the bus
*
* @param[in] g The GDisplay structure
2013-07-21 15:42:25 +00:00
*
* @notapi
*/
static inline void acquire_bus(GDisplay *g) {
(void) g;
2013-07-21 15:42:25 +00:00
}
/**
* @brief Release exclusive control of the bus
2013-07-21 15:42:25 +00:00
*
* @param[in] g The GDisplay structure
2013-07-21 15:42:25 +00:00
*
* @notapi
*/
static inline void release_bus(GDisplay *g) {
(void) g;
2013-07-21 15:42:25 +00:00
}
/**
* @brief Send data to the index register.
*
* @param[in] g The GDisplay structure
* @param[in] index The index register to set
2013-07-21 15:42:25 +00:00
*
* @notapi
*/
static inline void write_index(GDisplay *g, uint16_t index) {
(void) g;
(void) index;
2013-07-21 15:42:25 +00:00
}
/**
* @brief Send data to the lcd.
2013-07-21 15:42:25 +00:00
*
* @param[in] g The GDisplay structure
* @param[in] data The data to send
2013-07-21 15:42:25 +00:00
*
* @notapi
*/
static inline void write_data(GDisplay *g, uint16_t data) {
(void) g;
(void) data;
2013-07-21 15:42:25 +00:00
}
#endif /* _GDISP_LLD_BOARD_H */
/** @} */