ugfx/drivers/gdisp/SSD1289/board_SSD1289_template.h

192 lines
3.7 KiB
C
Raw Normal View History

/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.org/license.html
*/
/**
* @file drivers/gdisp/SSD1289/board_SSD1289_template.h
* @brief GDISP Graphic Driver subsystem board interface for the SSD1289 display.
*
* @addtogroup GDISP
* @{
*/
#ifndef _GDISP_LLD_BOARD_H
#define _GDISP_LLD_BOARD_H
/**
* @brief Initialise the board for the display.
*
* @param[in] g The GDisplay structure
*
2013-10-21 07:11:07 +00:00
* @note Set the g->board member to whatever is appropriate. For multiple
* displays this might be a pointer to the appropriate register set.
*
* @notapi
*/
static inline void init_board(GDisplay *g) {
(void) g;
}
/**
* @brief After the initialisation.
*
* @param[in] g The GDisplay structure
*
* @notapi
*/
static inline void post_init_board(GDisplay *g) {
(void) g;
}
/**
* @brief Set or clear the lcd reset pin.
*
* @param[in] g The GDisplay structure
* @param[in] state TRUE = lcd in reset, FALSE = normal operation
*
* @notapi
*/
static inline void setpin_reset(GDisplay *g, bool_t state) {
(void) g;
(void) state;
}
/**
* @brief Set the lcd back-light level.
*
* @param[in] g The GDisplay structure
* @param[in] percent 0 to 100%
*
* @notapi
*/
static inline void set_backlight(GDisplay *g, uint8_t percent) {
(void) g;
(void) percent;
}
/**
* @brief Take exclusive control of the bus
*
* @param[in] g The GDisplay structure
*
* @notapi
*/
static inline void acquire_bus(GDisplay *g) {
(void) g;
}
/**
* @brief Release exclusive control of the bus
*
* @param[in] g The GDisplay structure
*
* @notapi
*/
static inline void release_bus(GDisplay *g) {
(void) g;
}
/**
* @brief Send data to the index register.
*
* @param[in] g The GDisplay structure
* @param[in] index The index register to set
*
* @notapi
*/
static inline void write_index(GDisplay *g, uint16_t index) {
(void) g;
(void) index;
}
/**
* @brief Send data to the lcd.
*
* @param[in] g The GDisplay structure
* @param[in] data The data to send
*
* @notapi
*/
static inline void write_data(GDisplay *g, uint16_t data) {
(void) g;
(void) data;
}
/**
* @brief Set the bus in read mode
*
* @param[in] g The GDisplay structure
*
* @notapi
*/
static inline void setreadmode(GDisplay *g) {
(void) g;
}
/**
* @brief Set the bus back into write mode
*
* @param[in] g The GDisplay structure
*
* @notapi
*/
static inline void setwritemode(GDisplay *g) {
(void) g;
}
/**
* @brief Read data from the lcd.
* @return The data from the lcd
*
* @param[in] g The GDisplay structure
*
* @notapi
*/
static inline uint16_t read_data(GDisplay *g) {
(void) g;
return 0;
}
/**
* The below section you can replace with #error if your interface doesn't support DMA
*/
#if defined(GDISP_USE_DMA) || defined(__DOXYGEN__)
//#error "GDISP - SSD1289: This interface does not support DMA"
/**
* @brief Transfer data using DMA but don't increment the source address
*
* @param[in] g The GDisplay structure
* @param[in] buffer The source buffer location
* @param[in] area The number of pixels to transfer
*
* @notapi
*/
static inline void dma_with_noinc(GDisplay *g, color_t *buffer, int area) {
(void) g;
(void) buffer;
(void) area;
}
/**
* @brief Transfer data using DMA incrementing the source address
*
* @param[in] g The GDisplay structure
* @param[in] buffer The source buffer location
* @param[in] area The number of pixels to transfer
*
* @notapi
*/
static inline void dma_with_inc(GDisplay *g, color_t *buffer, int area) {
(void) g;
(void) buffer;
(void) area;
}
#endif
#endif /* _GDISP_LLD_BOARD_H */
/** @} */