ugfx/drivers/gdisp/Nokia6610GE8/GE8.h

55 lines
2.0 KiB
C
Raw Normal View History

2013-05-03 14:36:17 +00:00
/*
2013-06-15 11:37:22 +00:00
* This file is subject to the terms of the GFX License. If a copy of
2013-05-03 14:36:17 +00:00
* the license was not distributed with this file, you can obtain one at:
*
2013-07-21 20:20:37 +00:00
* http://ugfx.org/license.html
2013-05-03 14:36:17 +00:00
*/
2013-07-21 15:42:25 +00:00
#ifndef GE8_H
#define GE8_H
// *****************************************************************************
// Include file for Epson S1D15G00 LCD Controller (GE8)
//
// Author: James P Lynch August 30, 2007
// Modified for GDISP: Andrew Hannam August 2, 2012
//
// *****************************************************************************
#define DISON 0xAF // Display on
#define DISOFF 0xAE // Display off
#define DISNOR 0xA6 // Normal display
#define DISINV 0xA7 // Inverse display
#define COMSCN 0xBB // Common scan direction
#define DISCTL 0xCA // Display control
#define SLPIN 0x95 // Sleep in
#define SLPOUT 0x94 // Sleep out
#define PASET 0x75 // Page address set
#define CASET 0x15 // Column address set
#define DATCTL 0xBC // Data scan direction, etc.
#define RGBSET8 0xCE // 256-color position set
#define RAMWR 0x5C // Writing to memory
#define RAMRD 0x5D // Reading from memory
#define PTLIN 0xA8 // Partial display in
#define PTLOUT 0xA9 // Partial display out
#define RMWIN 0xE0 // Read and modify write
#define RMWOUT 0xEE // End
#define ASCSET 0xAA // Area scroll set
#define SCSTART 0xAB // Scroll start set
#define OSCON 0xD1 // Internal oscillation on
#define OSCOFF 0xD2 // Internal oscillation off
#define PWRCTR 0x20 // Power control
#define VOLCTR 0x81 // Electronic volume control
#define VOLUP 0xD6 // Increment electronic control by 1
#define VOLDOWN 0xD7 // Decrement electronic control by 1
#define TMPGRD 0x82 // Temperature gradient set
#define EPCTIN 0xCD // Control EEPROM
#define EPCOUT 0xCC // Cancel EEPROM control
#define EPMWR 0xFC // Write into EEPROM
#define EPMRD 0xFD // Read from EEPROM
#define EPSRRD1 0x7C // Read register 1
#define EPSRRD2 0x7D // Read register 2
#define NOP 0x25 // NOP instruction
#endif /* GE8_H */