122 lines
3.5 KiB
C
122 lines
3.5 KiB
C
|
#include "gfx.h"
|
||
|
|
#include "stm32f7xx_hal.h"
|
||
|
|
|
||
|
|
systemticks_t gfxSystemTicks(void)
|
||
|
|
{
|
||
|
|
return HAL_GetTick();
|
||
|
|
}
|
||
|
|
|
||
|
|
systemticks_t gfxMillisecondsToTicks(delaytime_t ms)
|
||
|
|
{
|
||
|
|
return ms;
|
||
|
|
}
|
||
|
|
|
||
|
|
static void SystemClock_Config(void);
|
||
|
|
static void CPU_CACHE_Enable(void);
|
||
|
|
|
||
|
|
void Raw32OSInit(void) {
|
||
|
|
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct;
|
||
|
|
|
||
|
|
/* Enable the CPU Cache */
|
||
|
|
CPU_CACHE_Enable();
|
||
|
|
|
||
|
|
/* STM32F7xx HAL library initialization:
|
||
|
|
- Configure the Flash ART accelerator on ITCM interface
|
||
|
|
- Configure the Systick to generate an interrupt each 1 msec
|
||
|
|
- Set NVIC Group Priority to 4
|
||
|
|
- Global MSP (MCU Support Package) initialization
|
||
|
|
*/
|
||
|
|
HAL_Init();
|
||
|
|
|
||
|
|
/* Configure the system clock to 216 MHz */
|
||
|
|
SystemClock_Config();
|
||
|
|
|
||
|
|
// LED - for testing
|
||
|
|
GPIO_InitTypeDef GPIO_InitStruct;
|
||
|
|
GPIO_InitStruct.Pin = GPIO_PIN_1;
|
||
|
|
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
|
||
|
|
__GPIOI_CLK_ENABLE();
|
||
|
|
HAL_GPIO_Init(GPIOI, &GPIO_InitStruct);
|
||
|
|
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief System Clock Configuration
|
||
|
|
* The system Clock is configured as follow :
|
||
|
|
* System Clock source = PLL (HSE)
|
||
|
|
* SYSCLK(Hz) = 200000000 / 216000000
|
||
|
|
* HCLK(Hz) = 200000000 / 216000000
|
||
|
|
* AHB Prescaler = 1
|
||
|
|
* APB1 Prescaler = 4
|
||
|
|
* APB2 Prescaler = 2
|
||
|
|
* HSE Frequency(Hz) = 25000000
|
||
|
|
* PLL_M = 25
|
||
|
|
* PLL_N = 400 / 432
|
||
|
|
* PLL_P = 2
|
||
|
|
* PLL_Q = 8 / 9
|
||
|
|
* VDD(V) = 3.3
|
||
|
|
* Main regulator output voltage = Scale1 mode
|
||
|
|
* Flash Latency(WS) = 6 / 7
|
||
|
|
* @param None
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void SystemClock_Config(void)
|
||
|
|
{
|
||
|
|
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||
|
|
RCC_OscInitTypeDef RCC_OscInitStruct;
|
||
|
|
HAL_StatusTypeDef ret = HAL_OK;
|
||
|
|
|
||
|
|
/* Enable HSE Oscillator and activate PLL with HSE as source */
|
||
|
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||
|
|
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||
|
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||
|
|
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||
|
|
RCC_OscInitStruct.PLL.PLLM = 25;
|
||
|
|
RCC_OscInitStruct.PLL.PLLN = 400; // 432
|
||
|
|
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
||
|
|
RCC_OscInitStruct.PLL.PLLQ = 8; // 9
|
||
|
|
|
||
|
|
ret = HAL_RCC_OscConfig(&RCC_OscInitStruct);
|
||
|
|
if(ret != HAL_OK)
|
||
|
|
{
|
||
|
|
while(1) { ; }
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Activate the OverDrive to reach the 200/216 MHz Frequency */
|
||
|
|
ret = HAL_PWREx_EnableOverDrive();
|
||
|
|
if(ret != HAL_OK)
|
||
|
|
{
|
||
|
|
while(1) { ; }
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
|
||
|
|
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
||
|
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||
|
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||
|
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
|
||
|
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
|
||
|
|
|
||
|
|
ret = HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_6); // FLASH_LATENCY_7
|
||
|
|
if(ret != HAL_OK)
|
||
|
|
{
|
||
|
|
while(1) { ; }
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief CPU L1-Cache enable.
|
||
|
|
* @param None
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
static void CPU_CACHE_Enable(void)
|
||
|
|
{
|
||
|
|
/* Enable I-Cache */
|
||
|
|
SCB_EnableICache();
|
||
|
|
|
||
|
|
/* Enable D-Cache */
|
||
|
|
SCB_EnableDCache();
|
||
|
|
}
|
||
|
|
|