ugfx/boards/base/STM32F429i-Discovery/board_STM32F429iDiscovery.h

131 lines
3.3 KiB
C
Raw Normal View History

/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.org/license.html
*/
#ifndef _GDISP_LLD_BOARD_H
#define _GDISP_LLD_BOARD_H
#include "stm32f4xx_fmc.h"
#include "stm32f429i_discovery_sdram.h"
#include <string.h>
#define SPI_PORT &SPID5
#define DC_PORT GPIOD
#define DC_PIN GPIOD_LCD_WRX
static const SPIConfig spi_cfg = {
NULL,
GPIOC,
GPIOC_SPI5_LCD_CS,
((1 << 3) & SPI_CR1_BR) | SPI_CR1_SSM | SPI_CR1_SSI | SPI_CR1_MSTR
};
static const ltdcConfig driverCfg = {
240, 320,
10, 2,
20, 2,
10, 4,
0,
0x000000,
{
(LLDCOLOR_TYPE *)SDRAM_BANK_ADDR, // frame
240, 320, // width, height
240 * LTDC_PIXELBYTES, // pitch
LTDC_PIXELFORMAT, // fmt
0, 0, // x, y
240, 320, // cx, cy
LTDC_COLOR_FUCHSIA, // defcolor
0x980088, // keycolor
LTDC_BLEND_FIX1_FIX2, // blending
0, // palette
0, // palettelen
0xFF, // alpha
LTDC_LEF_ENABLE // flags
},
LTDC_UNUSED_LAYER_CONFIG
};
static inline void init_board(GDisplay *g) {
// As we are not using multiple displays we set g->board to NULL as we don't use it.
g->board = 0;
switch(g->controllerdisplay) {
case 0: // Set up for Display 0
palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(7)); // UART_TX
palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(7)); // UART_RX
palSetPadMode(GPIOF, GPIOF_LCD_DCX, PAL_MODE_ALTERNATE(5));
palSetPadMode(GPIOF, GPIOF_LCD_DE, PAL_MODE_ALTERNATE(14));
#define STM32_SAISRC_NOCLOCK (0 << 23) /**< No clock. */
#define STM32_SAISRC_PLL (1 << 23) /**< SAI_CKIN is PLL. */
#define STM32_SAIR_DIV2 (0 << 16) /**< R divided by 2. */
#define STM32_SAIR_DIV4 (1 << 16) /**< R divided by 4. */
#define STM32_SAIR_DIV8 (2 << 16) /**< R divided by 8. */
#define STM32_SAIR_DIV16 (3 << 16) /**< R divided by 16. */
#define STM32_PLLSAIN_VALUE 192
#define STM32_PLLSAIQ_VALUE 7
#define STM32_PLLSAIR_VALUE 4
#define STM32_PLLSAIR_POST STM32_SAIR_DIV4
/* PLLSAI activation.*/
RCC->PLLSAICFGR = (STM32_PLLSAIN_VALUE << 6) | (STM32_PLLSAIR_VALUE << 28) | (STM32_PLLSAIQ_VALUE << 24);
RCC->DCKCFGR = (RCC->DCKCFGR & ~RCC_DCKCFGR_PLLSAIDIVR) | STM32_PLLSAIR_POST;
RCC->CR |= RCC_CR_PLLSAION;
// Initialise the SDRAM
SDRAM_Init();
// Clear the SDRAM
memset((void *)SDRAM_BANK_ADDR, 0, 0x400000);
spiStart(SPI_PORT, &spi_cfg);
break;
}
}
static inline void post_init_board(GDisplay *g) {
(void) g;
}
static inline void set_backlight(GDisplay *g, uint8_t percent) {
(void) g;
(void) percent;
}
static inline void acquire_bus(GDisplay *g) {
(void) g;
spiSelect(SPI_PORT);
}
static inline void release_bus(GDisplay *g) {
(void) g;
spiUnselect(SPI_PORT);
}
static inline void write_index(GDisplay *g, uint8_t index) {
static uint8_t sindex;
(void) g;
palClearPad(DC_PORT, DC_PIN);
sindex = index;
spiSend(SPI_PORT, 1, &sindex);
}
static inline void write_data(GDisplay *g, uint8_t data) {
static uint8_t sdata;
(void) g;
palSetPad(DC_PORT, DC_PIN);
sdata = data;
spiSend(SPI_PORT, 1, &sdata);
}
#endif /* _GDISP_LLD_BOARD_H */